Hi barry theres a 250w KUHNE amp being advertised on eBay …been on there a few weeks now …not mine BTW 😊 -- Steve G4HTZ JO01JN60 Great Wakering, Essex 24ghz 1.8w 80cm dish also known to be

Hello all…. Could anyone share what their “go to” final PA device would be for 23cms? I’m looking for a device specced at 100w or so that I would of course only operate at 50w, until such time

Thanks Geoff, Stuart That confirms my observations. GB3LES is usually marginal here on 13cm, but I expected something more when there was rain about (R/S) recently. Hope it can

I confirm Stuart's beacon status update : GB3LES has a fault : output power has dropped to approx 10mW, it will be removed from site for further investigation within next 10days.

I'm selling my pair of identical systems from the first batch of VK boards, one is spoken for. Each comprises a pair of 120x80x55 diecast boxes linked by a 500mm screened cable: - RF box containing

Hi Martyn, I recently saw G3TQF who is the beacon keeper who asked me if I knew if GB3LEF 9cm beacon was on air. So at the last UKAC SHF contest I made a point of checking the ones I could

GM All Can someone cofirm whether GB3LES (nom. 2320.955 MHz ) is currently operational. Not been spotted on beaconspot since last November, and last heard here in early April. I think

 For all that follow the FLL4101 posting I also have build a board and tested it as follows. Isolator bypassed as the legs are boken off test condition 12VDS Idle 3A freq 3.4Ghz Input 27dbm

I know this is a long short, but does anyone have any WR284 bits - particularly adapters to coax and terminations? I have a potential customer wanting a WR284 waveguide calibration kit. It will

Hi Sam, if you do not sell the feed I might be interested. Can you send me pictures and what is the price? vy 73, Rainer Am 10.06.2022 um 13:31 schrieb SAM JEWELL via groups.io:

Thanks for your replies. Dave.

Hi Sam I’m interested in the preamp. Please bring it to RAL. Thanks Dave G8GKQ

 Folks, I have a VLNa9 (9cm band) preamp kit left from DDKits close down. If anyone is interested I will bring it to RAL. Discounted, of course! I am sorting out a large amount of other stuff to

Well, there is that ... I've ordered a couple, I did ask the seller if he had complete ones, and he said he did, but then failed to get back with price or photos. -- Robin Szemeti - G1YFG

Indeed it was not necessary but getting to that on board SMA was with a piece of 085 was just too handy However who wants to through away power to an isolator? cheers Geoff GI0GDP

Out of interest, why did you remove the isolator? According to the spec sheet it is in band and capable of the 40W .. -- Robin Szemeti - G1YFG

This device was talked about a few days ago and early test at low power 1 watt at 3.4 GHz shows about 10dB gain, ie driven with 100mW, 1.5A Idq and 12Vds. Just need about 3 or 4 watts at 3.4 GHz for

It has not been operational for a while. I believe there are difficulties accessing the site. 73s Brian GM8BJF

In message <5ZBv.1654773656110545539.PEy1@groups.io>, Dave smith <dave.goathland@...> writes It's been off for a while. Brian GM4DIJ -- Brian Howie

No listing (even) @ beaconspot.uk Dave, G1OGY