|
Fet required
Sorry for the bandwidth.
Having now received my returned 6mth old dead DL2AM 10Ghz amp,( agreed to fix, refused to accept delivery and then stated he had no spare parts anyway ), I am left with a nice
Sorry for the bandwidth.
Having now received my returned 6mth old dead DL2AM 10Ghz amp,( agreed to fix, refused to accept delivery and then stated he had no spare parts anyway ), I am left with a nice
|
By
militaryoperator
·
#64067
·
|
|
Re: Reverse digibeacons for microwaves
The SARL Next Generation Beacon Programme and Tom, ZR6TG, is working on this online tool: https://www.beacons-sa.co.za/index It is work in progress but looks promising.
Bo
www.rudius.net/oz2m ::
The SARL Next Generation Beacon Programme and Tom, ZR6TG, is working on this online tool: https://www.beacons-sa.co.za/index It is work in progress but looks promising.
Bo
www.rudius.net/oz2m ::
|
By
Bo, OZ2M
·
#64066
·
|
|
Re: Activtiy List for the UK Microwave Group 24/47/76GHz Contests - Sunday 12th September
G4FRE/P should be active as follows
Man portable at IO81XW91 (Cleeve common trig point) 10.00 - 1130 bst Talkback Zello 07941541592.
Portable at IO81WU82 Birdlip 1230-1400 bst, talkback 144.390 ssb.
G4FRE/P should be active as follows
Man portable at IO81XW91 (Cleeve common trig point) 10.00 - 1130 bst Talkback Zello 07941541592.
Portable at IO81WU82 Birdlip 1230-1400 bst, talkback 144.390 ssb.
|
By
G4FRE
·
#64065
·
|
|
Ramco boat anchors, was10 GHZ SSPAs
So, returned home just now, first things first, check on the bees and then get these noise figure meters out of their cardboard box from Ramco.
Incredibly badly packed, but they survived.
So the
So, returned home just now, first things first, check on the bees and then get these noise figure meters out of their cardboard box from Ramco.
Incredibly badly packed, but they survived.
So the
|
By
Robin Szemeti - G1YFG
·
#64064
·
|
|
Re: 10GHz Capable Sig Gen WB SG 1
I also needed a signal source to get going on 10 GHz. My solution was to use a tripler after an ADF 4350 synth module. The tripler I chose was the RMK-3-153 from MCL. It works very well over quite a
I also needed a signal source to get going on 10 GHz. My solution was to use a tripler after an ADF 4350 synth module. The tripler I chose was the RMK-3-153 from MCL. It works very well over quite a
|
By
Greg - ZL3IX
·
#64063
·
|
|
Re: Activtiy List for the UK Microwave Group 24/47/76GHz Contests - Sunday 12th September
Callsign: G1DFL/P
Locator: IO91ON71 Bisham Hill (clear to Walbury/Gibbet, Basingstoke)
Then roving to various sites further West (TBC)
Bands: 24GHz 250mw 30cm
Callsign: G1DFL/P
Locator: IO91ON71 Bisham Hill (clear to Walbury/Gibbet, Basingstoke)
Then roving to various sites further West (TBC)
Bands: 24GHz 250mw 30cm
|
By
G1DFL
·
#64062
·
|
|
Re: Activtiy List for the UK Microwave Group 24/47/76GHz Contests - Sunday 12th September
I should be operational again this Sunday.
Again trialling the new 24GHz loan gear.
Callsign: G4SJH/P
Locator: IO91GI44
Bands:
24GHz 2W 60cm offset dish + alternatives if it doesn't work!
Talkback:
I should be operational again this Sunday.
Again trialling the new 24GHz loan gear.
Callsign: G4SJH/P
Locator: IO91GI44
Bands:
24GHz 2W 60cm offset dish + alternatives if it doesn't work!
Talkback:
|
By
Barry Lewis
·
#64061
·
|
|
Re: Activtiy List for the UK Microwave Group 24/47/76GHz Contests - Sunday 12th September
Proposed activity for Sunday.
G8CUB/P
IO91GI25 Coombe Gibbet 10.00 - 12.30 bst
IO91CL12 Hackpen 13.30 - 16.00 bst
IO91DM75 Liddington (280 - 360 deg. only) if time later
24GHz 2W 30cm dish
47GHz
Proposed activity for Sunday.
G8CUB/P
IO91GI25 Coombe Gibbet 10.00 - 12.30 bst
IO91CL12 Hackpen 13.30 - 16.00 bst
IO91DM75 Liddington (280 - 360 deg. only) if time later
24GHz 2W 30cm dish
47GHz
|
By
Roger Ray
·
#64060
·
|
|
Re: Activtiy List for the UK Microwave Group 24/47/76GHz Contests - Sunday 12th September
G8GTZ/P
Somewhere in IO91KF from 11am.
24 Ghz - 1 watt to 60cms
47 GHz - 10 milliwatts to 60cms
76 GHz - 1 milliwatt
Talkback 433.450 FM, 07881914287 and maybe 144.390
73
Noel
G8GTZ/P
Somewhere in IO91KF from 11am.
24 Ghz - 1 watt to 60cms
47 GHz - 10 milliwatts to 60cms
76 GHz - 1 milliwatt
Talkback 433.450 FM, 07881914287 and maybe 144.390
73
Noel
|
By
Noel G8GTZ
·
#64059
·
|
|
Re: Activtiy List for the UK Microwave Group 24/47/76GHz Contests - Sunday 12th September
Callsign: G0JBA
Locator: JO01PG63
Band: 24GHz 1.8W 40cm Dish
Talkback: ON4KST
Times: Whenever G3XDY is on for the one QSO and any other time if required
Cheers
Phil G0JBA
Callsign: G0JBA
Locator: JO01PG63
Band: 24GHz 1.8W 40cm Dish
Talkback: ON4KST
Times: Whenever G3XDY is on for the one QSO and any other time if required
Cheers
Phil G0JBA
|
By
Phil Boorman G0JBA
·
#64058
·
|
|
Re: Activtiy List for the UK Microwave Group 24/47/76GHz Contests - Sunday 12th September
Callsign: G3ZME/P
Locator: IO82QL83 (Brown Clee)
Band: 24 GHz
Talkback: 144.390 and Zello SHF chat
Times: From about 10:30 local
73 Martyn (G3UKV)
Callsign: G3ZME/P
Locator: IO82QL83 (Brown Clee)
Band: 24 GHz
Talkback: 144.390 and Zello SHF chat
Times: From about 10:30 local
73 Martyn (G3UKV)
|
By
Martyn G3UKV
·
#64057
·
|
|
Re: 10GHz Capable Sig Gen WB SG 1
Hello Jim,
I bought mine from Aliexpress. Make sure you buy the right version.
73
Dave G4GLT.
Hello Jim,
I bought mine from Aliexpress. Make sure you buy the right version.
73
Dave G4GLT.
|
By
Dave
·
#64056
·
|
|
Re: Reverse digibeacons for microwaves
Hi Lou,
You are right. Though my home one ran for weeks without a hitch until yesterday
when I logged in and saw, the USB device was not "seen". So I swapped out the HackRF One
and saw it was working.
Hi Lou,
You are right. Though my home one ran for weeks without a hitch until yesterday
when I logged in and saw, the USB device was not "seen". So I swapped out the HackRF One
and saw it was working.
|
By
Alan Beard
·
#64055
·
|
|
Re: Reverse digibeacons for microwaves
Neither are alive as of a few minutes ago.
Regards
Lou
VK3ALB
Neither are alive as of a few minutes ago.
Regards
Lou
VK3ALB
|
By
Lou Blasco
·
#64054
·
|
|
Re: New beacons - buy, don't build
Hi all,
Leaving it running 24x7 makes my antenna usable by others at any time night or day.
Alan VK2ZIW
On Thu, 09 Sep 2021 08:57:40 -0700, Adrian G4UVZ via groups.io wrote
> I for one support the
Hi all,
Leaving it running 24x7 makes my antenna usable by others at any time night or day.
Alan VK2ZIW
On Thu, 09 Sep 2021 08:57:40 -0700, Adrian G4UVZ via groups.io wrote
> I for one support the
|
By
Alan Beard
·
#64053
·
|
|
Re: Reverse digibeacons for microwaves
Hi all,
My two, one on 3398 and 2301 and the other on DC bands have been running for months now.
A HackRF One with a horn with broadband feed for 2.3 and 3.4 GHz and the software is
Hi all,
My two, one on 3398 and 2301 and the other on DC bands have been running for months now.
A HackRF One with a horn with broadband feed for 2.3 and 3.4 GHz and the software is
|
By
Alan Beard
·
#64052
·
|
|
10GHz Capable Sig Gen WB SG 1
Hi All,
I was looking at the WB SG 1 sig gen as described in the May Scatterpoint and was wondering if there is a recommended vendor for these? - ebay shows several different sources, I'm not sure if
Hi All,
I was looking at the WB SG 1 sig gen as described in the May Scatterpoint and was wondering if there is a recommended vendor for these? - ebay shows several different sources, I'm not sure if
|
By
jimbod1973 .
·
#64051
·
|
|
Re: Activtiy List for the UK Microwave Group 24/47/76GHz Contests - Sunday 12th September
I hope to be at Cheesefoot Head, fallback location Lane End. Both SE of Winchester.
Callsign G8ACE
Locator IO91JB or JA
Bands 24G 2w (at the horn) 60cm J fed dish
47G Tx FM locked Gunn 150mW Rx LNA
I hope to be at Cheesefoot Head, fallback location Lane End. Both SE of Winchester.
Callsign G8ACE
Locator IO91JB or JA
Bands 24G 2w (at the horn) 60cm J fed dish
47G Tx FM locked Gunn 150mW Rx LNA
|
By
G8ACE
·
#64050
·
|
|
Re: Stretching the topic slightly for ADF4351 boards
Hi Roberto,
The pic showing the placement of the small bits of copper is blurred, can you provide a sharper picture please ?
Thank you
Regards
Colin de G8LBS.
Sent from Mail for
Hi Roberto,
The pic showing the placement of the small bits of copper is blurred, can you provide a sharper picture please ?
Thank you
Regards
Colin de G8LBS.
Sent from Mail for
|
By
Colin Ranson
·
#64049
·
|
|
Re: Activtiy List for the UK Microwave Group 24/47/76GHz Contests - Sunday 12th September
P.S. Will also have 433.450MHz NBFM, as we find a handie much easier to use over short range for mmwave working
Dave G1EHF
P.S. Will also have 433.450MHz NBFM, as we find a handie much easier to use over short range for mmwave working
Dave G1EHF
|
By
Dave G1EHF
·
#64048
·
|