Hi Wilko, Thanks for that, i came across it and the one published in Elektor back in 2011 i think. Its certainly worth a try for the cost of an Arduino and a 24 pin centronics

Mark, Just stick them in a jiffy bag and put a CN22B on them (available at the Post Office) - if the value marked is less than ~20 euros, there will be no charge. Posting loads of orders to EU and RoW

Maarten, Try John Dodds at BEC Distribution. johnd@.... Explaining to him the use they will be put to helps. I think he likes radio amateurs ! Regards Colin de G8LBS. Sent from

Indeed Brian, it was the phone number I rang, a dear old lady answered and as soon as I mentioned DASCo she brightened up ! Think DASCO stands for Derek A Smith Company. All sorted here now, its

I meant to add these came within 3-4 days with no added cost to the e-bay price from KUHNE. They were 4 Euro each BTW. 73’s Sent from Mail for Windows 10

Afternoon, I just got some 820MHz double pole TOKO’s (5 x Toko 5HW-78045A-820, 5HW-78045 Helixfilter Helical Filter, 820 MHz)from KUHNE via e-bay, not cheap at nearly 4 quid each, I really only

Update, just ran config system on my lad's Mac and it is working fine. A Windows 10 issue on two different laptops it would seem, either config software itself or windows I guess. Will see what the

Maarten the smaller filters do not go down to 600MHz.. 730MHz min Now we are outside the EU, I'm not sure how EU would treat incoming gifts or low value items, The UK

These are PCB mount. But not Toko footprint. On Sunday, February 7, 2021, 08:42:31 AM CST, Maarten PA0MHE <maarten.heuvelman@...> wrote:

Thanks both Mark and Kent. I didn't made it very clear but I need small signal filters I can mount on a PCB e.g. Toko , Neosid or Temwell. I do't know SWAF supplier brands.

600 MHz Helical Filters? I have some 800 MHz Helical Filters that came out of analog cell sites. They tune down to 450 MHz. 22 x 22 x 12 mm. Now, what do we do about VAT? Kent

Hi Maarten I have some interdigital filters that will tune easily but they are not very small 170 x 90 x 25. The SMA connections will make the 90mm dimension larger. passbannd

For a new 10GHz beacon we plan to use an IF of around 600MHz, for this we need 4 band-pass filters. Does anyone know a source for these filters ? 2.12.0.0

Hi Colin, You seem to have got the data you need. I ran mine off 12V and was not aware of issues. It ran that way Up a 30 ft tower north of Inverness at GM3WOJ's QTH.for a couple of years. Mine came

I'm considering making a POTY feed for 2.25 and 8.5 ghz for my 3 mtr dish. Does anyone have all the dimensions in wavelengths so I can scale to the frequencies I need please ? Been searching for 2

Google AR488 for a cheap Prologix clone based on an Arduino. I have one which works just fine with my HP3478a and 2x HP8642a. It works even with the 8642a on a single bus, which is nice given the

I bought one for use with my IC9700, set it up using Win 10 and it worked fine, I’ve moved the 9700 on and have reprogrammed it to 10MHz and it’s now locking my transverters and Racal counter,

Indeed David, I spoke to Derek Smith himself, now in retirement – just up the road from here in Diss. When I explained I hoped to use it to drive a DFS with an output of 92MHz, and how a DFS

I have just taken delivery on the same unit. Not had time to fire it up yet, but will do so tomorrow, and report back. Will be running on a windows7 pc though. Paul G6UAJ Sent from my Galaxy

Agreed - can't beat a Prologix Press all three print buttons on the 8569B simultaneously and get a complete screen dump to PC Andy www.g4jnt.com