|
Re: MKU 13 G3 Schematic
Conrad, MGF1302 ? or was that in older versions ?
Colin,. G8LBS.
Sent from Mail for Windows 10
From: Conrad, PA5Y
Sent: 07 January 2021 21:53
To: UKMicrowaves@groups.io
Subject:
Conrad, MGF1302 ? or was that in older versions ?
Colin,. G8LBS.
Sent from Mail for Windows 10
From: Conrad, PA5Y
Sent: 07 January 2021 21:53
To: UKMicrowaves@groups.io
Subject:
|
By
Colin Ranson
·
#60359
·
|
|
MKU 13 G3 Schematic
Does anyone have a schematic for an MKU 13 G3? I can’t find mine. I can find the bit of paper that came with it explaining how to fit a lock indicator LED but not the schematic. I just finished
Does anyone have a schematic for an MKU 13 G3? I can’t find mine. I can find the bit of paper that came with it explaining how to fit a lock indicator LED but not the schematic. I just finished
|
By
Conrad, PA5Y
·
#60358
·
|
|
Re: VK3CV 30THz full system demonstration.
John
yes it is. Modulation is via putting an opaque screen between the hot plate and the Rx; hence my reference before to QRSS
73 Barry, G8AGN
On 07/01/2021
John
yes it is. Modulation is via putting an opaque screen between the hot plate and the Rx; hence my reference before to QRSS
73 Barry, G8AGN
On 07/01/2021
|
By
Barry Chambers
·
#60357
·
|
|
75th Annivesary of Project Diana
This was on the SBMS reflector and migh be of interest to people here.
73s
Brian GM8BJF
____________________________________________________
From: Al Katz <alkatz@...>Date: Wed, Jan 6, 2021 at 8:01
This was on the SBMS reflector and migh be of interest to people here.
73s
Brian GM8BJF
____________________________________________________
From: Al Katz <alkatz@...>Date: Wed, Jan 6, 2021 at 8:01
|
By
Brian Flynn GM8BJF
·
#60356
·
|
|
Re: Scatterpoint and RadCom columns request for input.
Just send it out today to Roger.......
Just send it out today to Roger.......
|
By
Maarten PA0MHE
·
#60355
·
|
|
Re: Re elevation on a dish
Thanks Neil that is very helpful.
Dave G4GLT.
Thanks Neil that is very helpful.
Dave G4GLT.
|
By
Dave
·
#60354
·
|
|
Re: Re elevation on a dish
I mount the boxes on rails fixed to the moving part of the dish mount, but you can always use a short bit of flexiguide if you are only moving the dish a few degrees and if the angles work out.
Neil
I mount the boxes on rails fixed to the moving part of the dish mount, but you can always use a short bit of flexiguide if you are only moving the dish a few degrees and if the angles work out.
Neil
|
By
Neil Smith G4DBN
·
#60353
·
|
|
Re: Scatterpoint and RadCom columns request for input.
I'll be happy to write up the 9cm thing if it works ... boards expected ... ooh, tomorrow! It won't make this month, but it could make next month. You could ask Maarten PA0MHE if he has something
I'll be happy to write up the 9cm thing if it works ... boards expected ... ooh, tomorrow! It won't make this month, but it could make next month. You could ask Maarten PA0MHE if he has something
|
By
Robin Szemeti - G1YFG
·
#60352
·
|
|
Re: Re elevation on a dish
I suppose that if I use waveguide feed from the dish as I had intended , then that certainly complicates matters as the box with the transverter/ PA etc has to move with the back of the dish.
Dave
I suppose that if I use waveguide feed from the dish as I had intended , then that certainly complicates matters as the box with the transverter/ PA etc has to move with the back of the dish.
Dave
|
By
Dave
·
#60351
·
|
|
Re: Re elevation on a dish
Many dishes come with a tilting mount anyway, you might find it is easy to use bolts, washers and Nyloc nuts plus decent grease to make a solid pivot, then if the dish is stuff, push against it, or if
Many dishes come with a tilting mount anyway, you might find it is easy to use bolts, washers and Nyloc nuts plus decent grease to make a solid pivot, then if the dish is stuff, push against it, or if
|
By
Neil Smith G4DBN
·
#60350
·
|
|
Re: VAT ... it looks like it's going to be difficult.
No problem with that, as others have said, there is no place for racism here or anywhere else, but if you are expecting me to refrain from criticising the extensive VAT and customs fraud committed by
No problem with that, as others have said, there is no place for racism here or anywhere else, but if you are expecting me to refrain from criticising the extensive VAT and customs fraud committed by
|
By
Robin Szemeti - G1YFG
·
#60349
·
|
|
VK3CV 30THz full system demonstration.
I think he refers to it as a number of resistors in the TX
Barry VE4MA
I think he refers to it as a number of resistors in the TX
Barry VE4MA
|
By
Barry VE4MA <ve4ma@...>
·
#60348
·
|
|
Re: Re elevation on a dish
Thank you very much Neil. The pictures look very comprehensive .
73
Dave G4GLT.
Thank you very much Neil. The pictures look very comprehensive .
73
Dave G4GLT.
|
By
Dave
·
#60347
·
|
|
Re: Scatterpoint and RadCom columns request for input.
Just do the sums - use the spreadsheet
You'll be surprised just how low a distance you'll end up with.
Andy
www.g4jnt.com
Just do the sums - use the spreadsheet
You'll be surprised just how low a distance you'll end up with.
Andy
www.g4jnt.com
|
By
Andy G4JNT
·
#60346
·
|
|
Re: Scatterpoint and RadCom columns request for input.
Plenty of EMF guidance will be available to help you with the assessment threshold- it is not an absolute limit, but a statutory rule to avoid high fields near other folk.
RSGB will also be releasing
Plenty of EMF guidance will be available to help you with the assessment threshold- it is not an absolute limit, but a statutory rule to avoid high fields near other folk.
RSGB will also be releasing
|
By
Murray Niman
·
#60345
·
|
|
Re: Scatterpoint and RadCom columns request for input.
Hi Murray,
These new EMF regs, does it mean we shall all have to use our QRO amps as doorstops and boat anchors ? Does it mean QRO terrestrial TV TX’s, eg Sudbury, Sandy Heath, etc will have to
Hi Murray,
These new EMF regs, does it mean we shall all have to use our QRO amps as doorstops and boat anchors ? Does it mean QRO terrestrial TV TX’s, eg Sudbury, Sandy Heath, etc will have to
|
By
Colin Ranson
·
#60344
·
|
|
Re: VAT ... it looks like it's going to be difficult.
Amen to that!
"Politics have no place in ham radio"
Wilko
PA1WBU
Amen to that!
"Politics have no place in ham radio"
Wilko
PA1WBU
|
By
Wilko
·
#60342
·
|
|
Re elevation on a dish
Hello,
I am adding elevation on a dish for tropo only (not EME) and wondered if anyone has a photo of the mechanics of it, preferably with some sort of hinge . I have an actuator which has a stroke
Hello,
I am adding elevation on a dish for tropo only (not EME) and wondered if anyone has a photo of the mechanics of it, preferably with some sort of hinge . I have an actuator which has a stroke
|
By
Dave
·
#60341
·
|
|
Re: Microstrip Filter designer
Don'tya just hate it when newer versions of software don't support old file formats?
None of my myriad of QUCS .sch files from the past will load in QUCs Studio.
" First we kill all the Software
Don'tya just hate it when newer versions of software don't support old file formats?
None of my myriad of QUCS .sch files from the past will load in QUCs Studio.
" First we kill all the Software
|
By
g4bao
·
#60340
·
|
|
Re: VK3CV 30THz full system demonstration.
If it Quacks and waddles it's a Duck ......
John
G0API
Murray does not seem to know where these 1W 10GHz devices are ?
If it Quacks and waddles it's a Duck ......
John
G0API
Murray does not seem to know where these 1W 10GHz devices are ?
|
By
John Fell
·
#60339
·
|