|
Re: QO100 Weak(ish) signal test
Decodes here, on a 0.6m dish were typically around -18dB (2.5kHz)
Via the Goonhilly websdr they were around -14dB
The WSJT manual suggests -24B is the threshold for this mode, which does suggest I
Decodes here, on a 0.6m dish were typically around -18dB (2.5kHz)
Via the Goonhilly websdr they were around -14dB
The WSJT manual suggests -24B is the threshold for this mode, which does suggest I
|
By
Andy G4JNT
·
#59856
·
|
|
Re: QO100 Weak(ish) signal test
Turned off 1945
Andy
www.g4jnt.com
Turned off 1945
Andy
www.g4jnt.com
|
By
Andy G4JNT
·
#59855
·
|
|
Re: 23cm interference
Dave
SDRPlay works fine with one of the cheap Windows-based tablets.
Ed G3VPF IO80RQ
Dave
SDRPlay works fine with one of the cheap Windows-based tablets.
Ed G3VPF IO80RQ
|
By
Ed G3VPF
·
#59854
·
|
|
Re: Microwavers Audio Keyer
Andy
Put me down for three boards.
Ed G3VPF IO80RQ
Andy
Put me down for three boards.
Ed G3VPF IO80RQ
|
By
Ed G3VPF
·
#59853
·
|
|
Re: Re Kuhne 5.7ghz PA
Dave
I agree with Don.
About 2 years ago I had exactly the same question, when installing a 3cms PA from DB6NT. Lots of head scratching. Anyway ...........
12v Permanent voltage is precisely what
Dave
I agree with Don.
About 2 years ago I had exactly the same question, when installing a 3cms PA from DB6NT. Lots of head scratching. Anyway ...........
12v Permanent voltage is precisely what
|
By
John Lemay
·
#59852
·
|
|
Re: Microwavers Audio Keyer
Hi Andy
Put me down for three please.
Tom
GM8MJV
Hi Andy
Put me down for three please.
Tom
GM8MJV
|
By
Tom GM8MJV
·
#59851
·
|
|
Re: 23cm interference
Hello John
I looked for the device either side of 432.580 and there’s nothing there. Tonight it’s particularly strong and noisy and is present as low as 1296.200. I’ve noticed that it drops in
Hello John
I looked for the device either side of 432.580 and there’s nothing there. Tonight it’s particularly strong and noisy and is present as low as 1296.200. I’ve noticed that it drops in
|
By
Dave - G4RQI
·
#59850
·
|
|
Re: Microwavers Audio Keyer
Andy,
Put me down for five boards please.
Ian G0FCT
Andy,
Put me down for five boards please.
Ian G0FCT
|
By
Ian Pawson G0FCT
·
#59849
·
|
|
Re: QO100 Weak(ish) signal test
It's still going
Andy
www.g4jnt.com
It's still going
Andy
www.g4jnt.com
|
By
Andy G4JNT
·
#59848
·
|
|
Re: QO100 Weak(ish) signal test
Mike
Had JT9D selected but the tolerance was must wider at 500 Hz will try changing the settings next time I hear Andy has a signal up on air
73’s
Denis
Mike
Had JT9D selected but the tolerance was must wider at 500 Hz will try changing the settings next time I hear Andy has a signal up on air
73’s
Denis
|
By
Denis Stanton G0OLX
·
#59847
·
|
|
Re: Microwavers Audio Keyer
OK, that's enough to make a decent order worthwhile. I did a quick sus on Newbury's site a few days ago, and at 50 off prices seemed quite reasonable. So will get the order sent in within a day
OK, that's enough to make a decent order worthwhile. I did a quick sus on Newbury's site a few days ago, and at 50 off prices seemed quite reasonable. So will get the order sent in within a day
|
By
Andy G4JNT
·
#59846
·
|
|
Re: Microwavers Audio Keyer
Put me down for one more taking the total up to three.
Many thanks,
David G4GLT.
Put me down for one more taking the total up to three.
Many thanks,
David G4GLT.
|
By
Dave
·
#59845
·
|
|
Re: QO100 Weak(ish) signal test
Looking - forget how to use WSJT....took me a while to find mode D.
--
Mike G0MJW
Looking - forget how to use WSJT....took me a while to find mode D.
--
Mike G0MJW
|
By
Mike Willis
·
#59844
·
|
|
Re: QO100 Weak(ish) signal test
Andy
Set the timing by Dimension 4 and that’s works well on 10 GHz moonbounce
Thanks for giving us something to listen to
73’s
Denis
G0OLX
Andy
Set the timing by Dimension 4 and that’s works well on 10 GHz moonbounce
Thanks for giving us something to listen to
73’s
Denis
G0OLX
|
By
Denis Stanton G0OLX
·
#59843
·
|
|
Re: QO100 Weak(ish) signal test
Matthias
Thank you
Thats the conclusion I came to
Best 73’s
Denis G0OLX
Matthias
Thank you
Thats the conclusion I came to
Best 73’s
Denis G0OLX
|
By
Denis Stanton G0OLX
·
#59842
·
|
|
Re: QO100 Weak(ish) signal test
--
Mike G0MJW
By
Mike Willis
·
#59841
·
|
|
Re: Microwavers Audio Keyer
Four here please Andy
Ron, G6BMY
Four here please Andy
Ron, G6BMY
|
By
Ron
·
#59840
·
|
|
Re: QO100 Weak(ish) signal test
WSJT-X is quite tolerant of LATE tones, so the delay from Goonhilly won't compromise things.
Denis, your timing is out
Andy
www.g4jnt.com
WSJT-X is quite tolerant of LATE tones, so the delay from Goonhilly won't compromise things.
Denis, your timing is out
Andy
www.g4jnt.com
|
By
Andy G4JNT
·
#59839
·
|
|
Re: QO100 Weak(ish) signal test
Try recording off websdr then play back to decode maybe
Chris G0WUS
Sent from my Galaxy
Try recording off websdr then play back to decode maybe
Chris G0WUS
Sent from my Galaxy
|
By
Chris G0WUS
·
#59838
·
|
|
Re: QO100 Weak(ish) signal test
Denis,
I am decoding Andy and my DT is 0.0
I suppose there is a delay on the path via Goonhilly WEBSDR, its processing and streaming it on its website.
Kind regards
Matthias
Denis,
I am decoding Andy and my DT is 0.0
I suppose there is a delay on the path via Goonhilly WEBSDR, its processing and streaming it on its website.
Kind regards
Matthias
|
By
DD1US
·
#59837
·
|