l will be at Hackpen IO91CL11 for the contest on Sunday. 24/47/76 with separate beacon on 75.976,2 Possibe move later in the day to Hinton Pava. 144.390 & KST. Mobile: 07900 261121 Roger G8CUB

I plan to be out all day Sunday, roving around IO91 trying some different paths. Hope to work a few of you! Dunstable Downs IO91RU (11am local to 12 noon) Chilton Ridgeway IO91IN (from 1pm to

G3ZME/P. Planning to go to our usual site on Sunday, with 24G only. IO82QL Brown Clee. Since John 'XDY is unable to do his excellent Activity List for this w/e, what follows is a

Pete, G(W)4HQX and I plan to be at the usual place, Cefn Y Galchen, IO81LS19. Both with 24, 47 & 76GHz. Talkback 144.390MHz, 'KST, Mob. 07762885015. Low humidity ordered! 73 Keith GW3TKH

CORRECTED INFORMATION - STOKE HILL LOCATOR IO81XG25 On Sunday I plan to start at Stoke Hill (providing the Army have no large scale training exercise taking place). I will probably move to Hackpen

Hi GHz'ers Since my May RadCom "GHz bands" coverage of this new transverter, I've been contacted by Kuhne's Sales Director to clarify the issue of it's frequency range and the term "limited edition"

Thanks for the responses I'll give Dean Hill and PepperBox Hill a miss. I think this Sunday' 24-47G-76G, activity will be around Hackpen so I'll probably travel somewhere over that way. For the 10G

On Sunday I plan to start at Stoke Hill (providing the Army have no large scale training exercise taking place). I will probably move to Hackpen later in the day. Stoke Hill IO91XG25 (from 09:00 UTC

Hello Pete, Trees are the problem on Dean Hill (the weather radar is in a 20m tower so above the trees!). The only good site on Dean Hill is adjacent to the MoD microwave relay tower at IO91EA27MI BUT

Hi Folks I will be at Hackpen IO91CL11 with Roger G8CUB and will have 24,47 & 76 GHz, talkback on 144.390 MHz and mobile 07763 109 888. Regards Chris G0FDZ On

The first of the UK Microwave Group mm-wave contests takes place this Sunday from 0900-1700z (1000-18000 BST) 0n 24/47/76GHz. Rules are here: http://microwavers.org/index.htm?contesting.htm I won't

Path Profile by G0MJW http://www.mike-willis.com/software.html Andy www.g4jnt.com

Forget pepper Box Hill too many trees, don't know about Dean hill. But your right the first two are good sites. All best John G7JTT

In a previous employment, I used a path prediction webapplication made available by the seller of some microwave links. Though it wasdesigned with higher frequencies in mind, I used it to check radio

Hi, Can anyone help? I am looking for a DB6NT Khune Electronics transverter for 9cm. pref 2M or 70cm IF Anything considered, new,old, kit etc thanks Mike G6TRM

Hi Microwavers, Just wondering to go for 24G and 10G UKuG contests over the next 2 Sundays. Fancy roving in IO91, between 4 sites and I'm looking at Lane End, Cheesefoot Head near Winchester and also

If you browse the radioartisan archives there is much info on using compass modules for antenna pointing. https://groups.io/g/radioartisan Sample below: WB6KCN

Hi Alan, Fantastic! Many thanks for the data sheet, just what I wanted; received OK at my Tiscali address Your efforts to dig out and scan the information are much appreciated. It’s a higher

Hello All, The 432 MHz and Above EME Newsletter for June 2018 by K2UYH can be downloaded from: http://www.nitehawk.com/rasmit/em70cm.html -- Enjoy -- Tnx Al. 73 Rein W6SZ

Roy G3FYX has the following equipment surplus to requirements:- Marconi TFT Power Meter System Type 6460/1, 10MHz to 18GHz with coax and Waveguide heads, cable, handbook and 20dB attentuator.