Our group has always preferred 2 metre talkback over ON4KST, but we accept for some ops this is a problem (antenna, local noise or lack of personal effort). This is particularly

Several other client-side apps exist already, like KSTClient, but they are all (far as I can see) using client-side filtering as there is no complex filter expression facility in KST itself. For the

That's what the Filtered window does. It only shows messages that you send and replies sent to you using the /CQ command. You can also pick up any other messages which mention your callsign,

Have you set it up for split screen with the second screen only showing filtered messages Andy? 73. Tony. G4NBS

KST2ME would work even better if you could just display messages to you asl (and any through filters you set up) as well as CQ calls. That would be a bit like a proper messaging service. It

As someone who goes out portable it is hard work, as others have said 2mtrs is becoming almost pointless as the amount of power it requires to work the same distances I manage on 3cm is just too much.

I gave up on running my masthead 10GHZ 20W TWT system over 10 years ago for all the previous reasons . I called for one way ,1/2 point , contacts a couple of times during the afternoon yesterday ,

I will agree with David that conditions were down today, certainly whencompared to last months session, although the WX was better for the /P stations. I don't use KST2ME and prefer the traditional

Well here I heard a fair bit of traffic on 144.175 from IO93 down to IO80 and across to IO91. Indeed stations needed to move to 185 to avoid causing qrm. You do need a 'proper' aerial of course. I

I used KST2ME, but had great difficulty seeing the screen in bright sunlight. I also had trouble attracting attention. To get it working at all I wasted a significant amount of time moving the mobile

I was using KSTME but is was still of little use today

Well, I finally managed to master KST2ME and once you've set it up with the sounds and things, and follow the rules it becomes useful - which is more than can be said for the main KST itself. In a /P

Well I was all ready for a great day working all the stations on the 10GHz contest! As Andy has said .175 was very quiet but there were many stations on KST..mostly French. Operating from home I

Thank you, I just bought one of his boards. 73 AC0PY Richard

I may not have much of an antenna (2 element ) but to hear NOTHING on 144.175MHz for uWave talkback really does seem a bit poor Still, KST2ME all seems to work, so ... 'jnt

And another late entry: Pete G1DFL/P IO91NM Remenham Hill (Good to the South and SW) 10GHz 0.2W 60cm Dish 144.175MHz SSB, KST, 07713 432632 Planning for 2pm to 3.30pm Also 24G

Sorry very late entry G7JTT IO90LX53 2W 3cm sky dish 2mtr or 07762112271 talkback

Hi Terry, I have of of those and also one of the OLED versions. I calibrated it against a signal generator which I believe is fairly accurate. It was within 2dB and much better in relative accuracy

The website is now open for bookings. It is at http://www.gmroundtable.org.uk/ To book a place follow the link in the right hand side bar "Links to forms" and it will take you to the booking page.

Hi Richard, Try: https://zl2bkc.com/store/ 73, Bob VK6KW