Howdo, I have about 90 issues of the paper scatterpoint / microwave news letters spanning 2002 to 2011 - any one want these? Please contact me off list. pjm at uhf-satcom dot com regards, Paul M0EYT.

Afternoon chaps, I have found in my collection of useful microwave surplus a Kodan L-Band IF BUC used in C-Band V-Sat systems; the unit is spec'd for 5W output for ultra linear operation. The device

Andy, All I don't know how to calculate the centre of the circle but if you know the VSWR on the transmission line then you know the resistances that the impedance circle must pass through. These

Hi Chris I have attended the Crawleymicrowave round table in the Past But the date is the important thing to me From:ukmicrowaves@...[mailto:ukmicrowaves@...] Sent: 10 July 2016

The FT817 is a popular driver radio for portable work. Given that it has two antenna connectors, it seems to me that a good way to provide a transverter interface is to modify the radio, rather than

With the addition of the LZ 13cms transverter to my collection of two DB6NTs, I now have three 13cms transverters, which is I think one too many. Is there any interest in a DB6NT MKU 23 G2? Mike

Thanks Paul We can liaise near to the time as to what you have and need etc. Regards Chris G0FDZ

Hi Depending on the date I can provide testequipment as I am in Arundel West Sussex Paul B From:ukmicrowaves@...[mailto:ukmicrowaves@...] Sent: 10 July 2016 08:19 To: ukmicrowaves@... Subject:

That would be great John and Andy as I have nothing at the moment. If its OK I'll stick with your talk title "The Bodger's Guide to building a 24GHz beacon John and call Andy's one " Portable 10GHz

And I could do one in parallel on a Bodgers's guide to a 10GHz Portable Beacon Andy G4JNT

Hi Chris If you're stuck for a talk I could probably put something together along the lines of "The Bodger's Guide to building a 24GHz beacon" based on my experience making of GB3CAM and

Its the Crawley club HQ south of Crawley town. Chris

Chris, What is the usual location? Simon Brown, GK4ELI http://sdr-radio.com

I will have the have the last three 1296MHz 45W PA kits + ten 1296MHz 2.5W driver kits with me at Finningley tomorrow. No plans for making any further 45W kits in the foreseeable future. so get them

Thanks Andy just found the manual so will read up on all the parameters, just looking at the screen grab I think I'm right in saying that SEE was around -12db so still loads of margin left ! look

Its all in the Manual, which you'll have in your installation directory and available via the Help menu. I suggest you read it fully as it describes in very good detail exactly how to use the suite

Hi all finally seem to have sorted out my GPSDO after a complete rebuild (thanks again to Noel for all your help), which now has a 10MHz crystal instead of the 5MHz doubled up to 10MHz. Anyway here is

I agree Brian, the graphical rotating around real impedances away from the normalisedvalue works well only for a limited range of transformations. It isparticularly useful for determining the

Well, I must really be losing it in old age here... A slightly earlier version of this FT817 (and similar) transverter interface without the DC switching was written up and published in RadCom Dec

Hi Andy, Barry and Mark, I can see Mark's suggestion will be good enough for most practical cases, but as I teach this stuff I have to show the students how to do it "properly", ;-) . By the time the