Callsign: G4WLC/P Locator: IO81wu (probably) Bands: 10GHz 1W 48cm dish Talkback: ON4KST, possibly 144.175MHz, 07515 340505. Times: tbd

Will be available during morning 0900-1130GMT then later from around1400GMT onwards. Call G4KUX Loc IO94BP 10Ghz only, 8W to 80Cm Dish Talkback KST, 144.175 400W, or 07860339512 txt

Sorry for the bandwidth. Anyone looking for a 3cm transverter Pse contact me direct off the reflector on Ralph.Bird@... 73 Ralph G4ALY

Weather dependant operation for 29th June: Callsign: GW4HQX/P Locator: IO81LS Band: 10Ghz 24Ghz(RX only) Callsign: GW3TKH/P Bands: 24Ghz (+47Ghz for test purposes) Talkback: 144.175 Mob:

Callsign: M0DTS/P Locator: IO94MJ most likely Bands: 10GHz 8W 24GHz Rx only, I'm hearing GB3MAN via RS at 112km so rx appears to be ok! 60cm dish on both bands.

Likely activity as follows: Callsign: G8CUB/P Locator: IO92XA Therfield Bands: 5.7GHz 2.5W 10GHz 5W 24GHz 1W all on 80cm dish 7m agl Talkback: ON4KST and 144.175MHz 50W Mob if all else fails: 07900

Barry, G4SJH and myself should be out on Combe Gibbet on Sunday, wx permitting Callsign: M0HNA/P Locator: IO91GI Bands: 5.7GHz 5W 60cm prime focus dish 10GHz 1W 60cm offset dish Talkback: ON4KST

Callsign: G0LGS/P Locator: IO81XW Bands: 10GHz 1W 40cm dish Talkback: ON4KST and possibly 144MHz (5W) Times: 1100 - 1700 approx --- Stewart G0LGS

Hi again, the weather is looking OK so I'm expecting to be out on Sunday. Callsign: GM8OTI/P Locator: IO74 probably Mull of Galloway (IO74NP) Bands: 10GHz 1W 40cm dish Talkback: will try ON4KST if

Hi Dave, I think you make a very good point, in respect we have technical support in the form of RF/electronics side of things but you are very much on your own when it comes to hardware unless you

Can we adopt a more positive note on this stream. It seems to have been hi-jacked into into back-biting and complaining!! I thought that a new beacon in the outer reaches would be good! ;-) Remember

I'll be taking a few of my 23cm driver kits (see www.g4bao.com) to Friedrichshafen. I'll be there for the whole event. If anyone wants one, either find me in the "throng," call me on site on 439.100

Sadly I'll be in Friedrichshafen all the time you'll be QRV as will two other potential 10GHz QSOs to JO02! Shame, as I still need GD on 3cm. Hope you have a good weekend! Some of the camb-hams

GE All; QRV 13, 9, 6 and 3cm + 24G from approx. Friday 27 June morning until Sunday evening 29 June. KST (hopefully) and 144.175 MHz +/- SSB (much more civilised) at most times.

 Now that the GB3MHZ signals has, from my view ofit, settled down again and the new frequency stability has been implemented, Inow think that I know how far off frequency my 23cm system is... If

On Wed, 25 Jun 2014 16:15:45 +0100 "Andy Talbot andy.g4jnt@... [ukmicrowaves]" <ukmicrowaves@...> wrote: Item 3 second line of summary, thats a big gamble , too much to fork out ,

 OK, here's a project that I'd like to throw out forinput... I have a DB6NT 10GHz to 432MHz G3 transverter system whichis capable of 5 Watts output but, currently, only has the normal MKU-G3 input

I was on Cleeve for the last one and am planning to be there this week too !

http://www.microwavers.org/support.htm Item 3

On Tue, 24 Jun 2014 10:23:15 +0100 "g4bao john@... [ukmicrowaves]" <ukmicrowaves@...> wrote: John the UKuwave group offers no assistance to anyone offering to put up personal