I think condx may not be great now but have some time now but onky between 1520 and 1645.. GL 73 Alan GM0USI/P Sent from Samsung Mobile

Hi John I plan to be active as follows Callsign: G8DTF Locator: IO83SM Bands: 10GHz 2.5W 78cm dish Talkback: ON4KST and 144MHz Times: Various times 73 Bob G8DTF

Does anyone know of where I can get a *male* N plug that is chassis mount. Something like this http://uk.farnell.com/amphenol-connex/172118/rf-coaxial-n-plug-str-50-ohm-solder/dp/1791344 from

Callsign: G4BAO Locator: JO02cg Bands: 24GHz 1.5W 60cm dish 10GHz 1W (or 6W) 60cm dish Talkback: ON4KST Times: times that suit my day! I should add that if my new 6W 10GHz station

Hi Bryan, I'm sorry I couldn't stay and chat...sked with XDY failed - I had worked him on 3cm the week before i went to Cumbrae. Condx this pm were poor - getting better now - worked John on tropo

Its time for the activity list again for next week's UK Microwave Group contests on 5.7, 10 and 24GHz. This is the final event in the series for the Championships for these bands. Please send me your

Hi Alan, If I may, can I ask for a copy of the CD. If you can share an ISO file of the CD on dropbox I ca downloaded. If that is not a problem with you Thanks and 73's Mans. 9H1GB

In spite of the antennas only being 6m above the ground, for directions to the left and right of the ridgeline the take off from the remaining Bell Hill beacons is still good. That is roughly West

Dear Alan, Thank you for the reply. If you could let me have the RJ45 pinouts that will be fine, I can then verify them for you. No need for the CD, thank you, I think I've found any other

Hi David that was from me....I think I have a CD still and I may have a page that defines the RJ45 outputs, though as you may remember the guy who wrote it mis counted the pins. Give a day or so and

Hello John, for info: Nothing from it today here but GB3NGI 539 with QSBat 527km. 73 Ralph G4ALY

Not actually uwave but maybe indicative of things ? GB3WGI- the transatlantic beacon is a solid signal , peaking at 559 at the moment with good JT65B decodes .This is the strongest I have seen since

Ok Martyn, will give you a bell when I have 9cm on the tripod.... 73 Alan To: ukmicrowaves@... From: ukv@... Date: Sat, 21 Sep 2013 19:29:00 +0100 Subject: Re: [ukmicrowaves] Re: IO76xa Sunday 6,9

Hi Alan Got the 9cm dish & feeder on the mast this weekend. Will follow activity as and when time permits, and maybe a QSO, IO76 to IO82 ? 73 Martyn G3UKV

Some years ago I bought a Motorola Oncore GPS unit at RAL. I've lost the CD that came with it. Can anybody help me with the pinouts of the RJ45 connector on the Oncore Interface board made by

Hi Alan I will be about on Sunday. I will be keeping an eye on conditions. I know my location isn't great in your direction, but conditions may help. It was good to work you on 23cm in the UKAC with

Thanks to all the replies.. wx not looking too bad...GL Sent from Samsung Mobile

Alan I will come on 3 and 6 from home. If the WX is good I might even try some /P Brian. GM8BJF -- Dr Brian W Flynn 15 Riselaw Crescent Edinburgh EH10 6HN 0131 447 4043

Hi Alan, I'll look out for you on KST for 10GHz. Don't have the 15W amp up and running yet, but I hope to by the contest next weekend. 73 John

 Hello Alan, Have forwarded it to the active DX boys over theother side of the Channel (more DX possibilities for you Ihope) 73 Ralph