A few comments peaking purely from a portable operators point of view :- 1. The inclusion of yet another band with 5.6 and 10Ghz risks the "complaint" from the 5.6/10Ghz only operators that time

Happy New Year, Another option may be WA5VJB's 23cm 'Easy Yagi' design. This is lightweight, disposible and costs next to nothing to build, whilst having a good 'power to weight' ratio! It is one in

Dear Keith, I use for portable 23 cm operation a small 15 elements yagi, home - made, after DL6WU design software. The construction it's very simple. It was made from copper heat system pipe, 1,5 m

Hello John General comment: rules and overview seemvery well organised and clear. The tweaks for 2008 seem goodoverall. Just 2 comments:- 1) With a poor home QTH, I mainly operate /P herein

John Might be worth adding VHF NFD 5-6 July. regards Grant G3XDY wrote:

Hello Keith. I made my own fit-in-a-suitcase sized one according to the standard DL6WU design software. No, it's not 'SOTA', but it sure was fun to use from high locations around the UK back in

Looking for a reasonably small and lightweight beam antenna for 23cm SOTA activity. The best choice to me looks like the TONNA 23 element or possibly the 35 element (a bit big and heavy), does anyone

May I wish a Happy New Year to all on the reflector Attached are the draft rules and calendar for UKUG contests during 2008. A few events have been dropped due to limited support, and the calendar

Hello all. I am looking for a waveguide bend freq 33to50 ghz. It does not matter which way. I wish you all a Happy New year and a lot off fun on microwaves. 73 John PA7JB

Eene, I plan to come over again this year. However, we have a problem with the old British disease. Strikes. There is a 48 hour stoppage planned for the start of the Heelweg weekend that will close

Hello Liviu, I think I have a piece of waveguid that I could send to you, along with a few SMA-connectors. Give me your address and I'll send it to you. 73 de Ronny SM7FWZ Liviu Babi wrote:

Rainer If memory serves correctly the 6063 and 6064 are 3RU and 1RU empty Rack Frames so they may not have useful manuals - I can't recall if the PSUs were separately specified. I may be able to find

> Hi, I need the following manuals RACAL 3100 9423 also data sheet 9478 9480 pro-bel 6063 6064 6251 Hopefully someone could help me. Originals, photo copies or PDF's ok. Happy New Year ! vy

Dear Ian, Tnx for helping mail. Can you made a pictures to your home made 10 GHz tranzition ? Also can you draw all wavweguide on the paper and send in the next mail ? Need all dimensions and details

Hello Liviu (and others) and greetings from Australia! My experience in making WR90 transitions is that they are fairly easy to get going, just as long as you make them carefully. As others have

Hello Liviu, All of my 10GHz transitions are made according to the design at http://hjem.get2net.dk/ole_nykjaer/oz2oe/antenner/10ghz_slotant_sma.jpg that drawing should answer your questions. I use

Hello Eene, Unfortunately I won't be able to attend Heelweg 2008 as I shall be attending the RSGB Presidential Installation dinner however from the vast array of test equipment that will be available

Hello, I'm YO4FNG, Liviu from KN44HD. I am beginner in 3 cm band. Have few questions: I want to build a coax to waveguide for 3 cm band (WR90) following the details from

HEELWEGMICROWAVE 2008 Dear SHF amateur, With125 visitors from 5 countries the Heelweg Microwave meeting 2007 has been afantastic happening. In2008 we are planning the 6th meeting on

sure thing Ian regards ken