|
Re: Low bands Contest this Sunday
Ray wrote:
Just got my home PC back up and running, after another HDD crash... Now using a different HDD!
So, I plan to be on 23cm tomorrow as well. Not all of the time, but hopefully at the start
Ray wrote:
Just got my home PC back up and running, after another HDD crash... Now using a different HDD!
So, I plan to be on 23cm tomorrow as well. Not all of the time, but hopefully at the start
|
By
Dave Ackrill <dave.g0dja@...>
·
#10327
·
|
|
Re: Low bands Contest this Sunday
Hi All
GW3TKH will be operating from home (again!) IO81JM
23cm: 10W, 34element yagi
13cm: 1W, 25element yagi
9cm: 10W, 60cm o/s dish
Talkback: 2m & 'KST
Hope to work a few more this time, GL
73
Hi All
GW3TKH will be operating from home (again!) IO81JM
23cm: 10W, 34element yagi
13cm: 1W, 25element yagi
9cm: 10W, 60cm o/s dish
Talkback: 2m & 'KST
Hope to work a few more this time, GL
73
|
By
gw3tkh@...
·
#10330
·
|
|
Re: Low bands Contest this Sunday
Hi all,
I will be active Sunday on 23cm.
Probably +/- 1296.190
If aircraft dependent then better to try with me earlier rather than
later plus I may not be on at the end as it is a long enough
Hi all,
I will be active Sunday on 23cm.
Probably +/- 1296.190
If aircraft dependent then better to try with me earlier rather than
later plus I may not be on at the end as it is a long enough
|
By
Ray <gm4cxm@...>
·
#10326
·
|
|
Re: New file uploaded to ukmicrowaves
On arange set up at the South Birmingham RS we found a Procom 24 GHz 48cm disha dB or so below its specification.
Ian
On arange set up at the South Birmingham RS we found a Procom 24 GHz 48cm disha dB or so below its specification.
Ian
|
By
G8IFT Blueyonder <g8ift@...>
·
#10325
·
|
|
olde english wg16 copper waveguide swop
I have some olde english wg16 copper waveguide to swop for 1m of the
modern wg16 version.Please email me
Thanks
I have some olde english wg16 copper waveguide to swop for 1m of the
modern wg16 version.Please email me
Thanks
|
By
John Randall <m0els@...>
·
#10324
·
|
|
Re: New file uploaded to ukmicrowaves
Thanks for that - very interesting. I looked up the gain of the 48cm Procom 24GHz dish. It should be 36 dBd. We measured 38 dBi, so if Procom's figures are accurate, so was our range.
The 70cm centre
Thanks for that - very interesting. I looked up the gain of the 48cm Procom 24GHz dish. It should be 36 dBd. We measured 38 dBi, so if Procom's figures are accurate, so was our range.
The 70cm centre
|
By
Mike Willis <m.j.willis@...>
·
#10323
·
|
|
Re: Low bands Contest this Sunday
Jules , G0NZO and I , will be operating as G4RFR from HQ of Flight Refuelling ARS , IO90AS this Sunday .
Will be QRV all three bands - look forward to better conditions than the last one wich was a
Jules , G0NZO and I , will be operating as G4RFR from HQ of Flight Refuelling ARS , IO90AS this Sunday .
Will be QRV all three bands - look forward to better conditions than the last one wich was a
|
By
JFELL@...
·
#10321
·
|
|
Re: RAL 2007
I second the comments made by Dave and all the others! This is my third year attending RAL, and I've thoroughly enjoyed each one. They are one of the highlights of my trips to the UK.
I second the comments made by Dave and all the others! This is my third year attending RAL, and I've thoroughly enjoyed each one. They are one of the highlights of my trips to the UK.
|
By
Steve - WB0DBS
·
#10322
·
|
|
New file uploaded to ukmicrowaves
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the ukmicrowaves
group.
File : /Antenna-range.xls
Uploaded by : g6gxk
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the ukmicrowaves
group.
File : /Antenna-range.xls
Uploaded by : g6gxk
|
By
ukmicrowaves@...
·
#10319
·
|
|
Re: Microwave Contact "Firsts"
Ray
If you click on the tabs at the foot of the tables you can select whatever band you wish, so have a look at 1.3GHz and please let me know of any additions and changes you are aware of.
Ray
If you click on the tabs at the foot of the tables you can select whatever band you wish, so have a look at 1.3GHz and please let me know of any additions and changes you are aware of.
|
By
John Quarmby
·
#10320
·
|
|
Re: Microwave Contact "Firsts"
Sorry!
It also pays to brows down to the bottom of a page and see other bands
listed!
Sorry!
It also pays to brows down to the bottom of a page and see other bands
listed!
|
By
Ray <gm4cxm@...>
·
#10318
·
|
|
Re: Microwave Contact "Firsts"
Thanks Murray,
If the intention was to drop my jaw, you succeeded.
Then I noticed 3.4 GHz at the top of the page!!!
Looking forward to seeing the rest of the bands when time allows.
As John has
Thanks Murray,
If the intention was to drop my jaw, you succeeded.
Then I noticed 3.4 GHz at the top of the page!!!
Looking forward to seeing the rest of the bands when time allows.
As John has
|
By
Ray <gm4cxm@...>
·
#10317
·
|
|
Re: Microwave Contact "Firsts"
And prompted by your request, I put the GM list on yesterday!
Murray
for all
for first
of
Wales.
29/03/07
And prompted by your request, I put the GM list on yesterday!
Murray
for all
for first
of
Wales.
29/03/07
|
By
Murray Niman <mjniman@...>
·
#10316
·
|
|
Re: Microwave Contact "Firsts"
Thanks Murray. Look forward to reading the info once it's published.
Nothing to add just yet but it would be interesting to see what has
still to be done.
73 Ray
Thanks Murray. Look forward to reading the info once it's published.
Nothing to add just yet but it would be interesting to see what has
still to be done.
73 Ray
|
By
Ray <gm4cxm@...>
·
#10314
·
|
|
Re: Microwave Contact "Firsts"
Hi Ray
We only started testing the HTML a few days a go!
I wanted to check how it formats as its a direct Excel export
- esp on older browsers and non-Microsoft ones
Thats why it wasnt mentioned
Hi Ray
We only started testing the HTML a few days a go!
I wanted to check how it formats as its a direct Excel export
- esp on older browsers and non-Microsoft ones
Thats why it wasnt mentioned
|
By
Murray Niman <mjniman@...>
·
#10313
·
|
|
Re: Microwave Contact "Firsts"
Hi Ray
The full set of lists should appear shortly on www.microwavers.org for all
UK countries. There are quite a few gaps to fill in, particularly for first
contacts between the various parts of the
Hi Ray
The full set of lists should appear shortly on www.microwavers.org for all
UK countries. There are quite a few gaps to fill in, particularly for first
contacts between the various parts of the
|
By
John Quarmby
·
#10315
·
|
|
Microwave Contact "Firsts"
Hi all,
Can anyone point me to a reference point of first contacts between
different countries on Microwave bands from the UK?
The page on the UKuG site only has information for 23cm from
Hi all,
Can anyone point me to a reference point of first contacts between
different countries on Microwave bands from the UK?
The page on the UKuG site only has information for 23cm from
|
By
Ray <gm4cxm@...>
·
#10312
·
|
|
Kenwood 23cm rig or similar wanted?
Hi,
Im looking for a Kenwood TM 541/531 or similar for opperation on 23cm.
Im in Ireland and I havent had much luck finding one of these.
Does anyone have any suggestions?
Thanks
73's
Tony
EI4GHB
Hi,
Im looking for a Kenwood TM 541/531 or similar for opperation on 23cm.
Im in Ireland and I havent had much luck finding one of these.
Does anyone have any suggestions?
Thanks
73's
Tony
EI4GHB
|
By
Tony Gallagher <tony_g_ireland@...>
·
#10311
·
|
|
Re: Doug's 23cm Trials
Doug
If your contact in Stanmore isn't able to sort youout, I would be pleased to help. I live near High Wycombe, about 30 mins drivefrom Kings Langley. I have quite a good workshop with a
Doug
If your contact in Stanmore isn't able to sort youout, I would be pleased to help. I live near High Wycombe, about 30 mins drivefrom Kings Langley. I have quite a good workshop with a
|
By
Michael Scott
·
#10310
·
|
|
Re: Antenna testing last RAL RT weekend
I took quite a few pictures at the antenna range and later at the dinner. There are also some from the round table itself, but not many. The problem is they are all about 3Mb in size, so not easy to
I took quite a few pictures at the antenna range and later at the dinner. There are also some from the round table itself, but not many. The problem is they are all about 3Mb in size, so not easy to
|
By
Mike Willis <m.j.willis@...>
·
#10309
·
|