Date   

adf3451 software

Neil, G3RIR
 

I have just obtained a ADF3451 via Amazon. It seems to work OK but is there any windows software to control it?

Neil G3RIR


Re: DUBUS Magazine for 2021

Conrad, PA5Y
 

Alan, I think that I will do exactly that. My distance vision remains excellent and a 4-x magnification illuminated lamp or even some 4 x magnification glasses are fine for soldering and I have a microscope for the small stuff.  I don't get headaches when doing this, only when reading. 

I do like the idea of Dubus in its present form and its strange smelling ink, but I need to do something that's for sure.

 I use Sony Xperia tablet for reading pdfs and I have not dropped it yet 🙂

73

Conrad PA5Y



From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Alan Melia via groups.io <Alan.Melia@...>
Sent: 15 January 2021 14:29
To: UKMicrowaves@groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
Conrad If you have reached that state, can I seriously suggest (if you have not done it) it is the time to dump cheap reading glasses and get a full eyetest and prescription glasses. I reached that state about 10 years ago finding I was getting acute eyestrain using standard readng glasses. I found I had astigmatismin my left eye. After getting prescription corrected glasses  I found I could read much more easily though a good light was an advantage, but I no longer felt eyestrain or headaches. I do not need distance glasses yet.
 
Like many of the other I cannot read technical text easily from a screen. A paper copy also makes less noise when it hits the floor than the laptop, when I fall asleep :-))
 
Alan
G3NYK 
----- Original Message -----
Sent: Friday, January 15, 2021 12:38 PM
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021

I used to feel the same way, but the fact is that I no longer get any enjoyment from Dubus. The print is simply too small for me to read. So, what should I do? Ask for a pdf so that I can enlarge the text to a comfortable size or just not renew? Dubus has an aging readership and I am quite sure that I am not the only one struggling. I could buy a big magnifying table lamp I suppose. I can't get on with higher magnification reading glasses, they give me headache.

Just a by-product of getting older.

73

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Robin Szemeti - G1YFG via groups.io <robin@...>
Sent: 15 January 2021 13:22
To: UKMicrowaves@groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
I enjoy getting the paper copy ... there is something "different" about having it in tangible form.  PDF is nice but people will tend to share them, which kills the revenue and eventually, kills the magazine ...

On Fri, 15 Jan 2021 at 12:17, Conrad, PA5Y <g0ruz@...> wrote:
I will renew my subscription, but I feel that it is about time that a PDF version was made available. I find it increasingly difficult to read as my eyesight worsens. Does anyone else feel the same way?

Regards

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Andy G4JNT via groups.io <andy.g4jnt=gmail.com@groups.io>
Sent: 15 January 2021 11:24
To: UK Microwaves groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
An excellent magazine - well-worth subscribing to.
And you can use it to practice your German too - all articles appear in both languages.



Virus-free. www.avg.com

On Fri, 15 Jan 2021 at 10:21, Roger Blackwell GM4PMK <gm4pmk@...> wrote:

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 

Roger Blackwell  GM4PMK

www.marsport.org.uk


--
Robin Szemeti - G1YFG


Re: DUBUS Magazine for 2021

Alan Melia
 

Conrad If you have reached that state, can I seriously suggest (if you have not done it) it is the time to dump cheap reading glasses and get a full eyetest and prescription glasses. I reached that state about 10 years ago finding I was getting acute eyestrain using standard readng glasses. I found I had astigmatismin my left eye. After getting prescription corrected glasses  I found I could read much more easily though a good light was an advantage, but I no longer felt eyestrain or headaches. I do not need distance glasses yet.
 
Like many of the other I cannot read technical text easily from a screen. A paper copy also makes less noise when it hits the floor than the laptop, when I fall asleep :-))
 
Alan
G3NYK 

----- Original Message -----
Sent: Friday, January 15, 2021 12:38 PM
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021

I used to feel the same way, but the fact is that I no longer get any enjoyment from Dubus. The print is simply too small for me to read. So, what should I do? Ask for a pdf so that I can enlarge the text to a comfortable size or just not renew? Dubus has an aging readership and I am quite sure that I am not the only one struggling. I could buy a big magnifying table lamp I suppose. I can't get on with higher magnification reading glasses, they give me headache.

Just a by-product of getting older.

73

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Robin Szemeti - G1YFG via groups.io <robin@...>
Sent: 15 January 2021 13:22
To: UKMicrowaves@groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
I enjoy getting the paper copy ... there is something "different" about having it in tangible form.  PDF is nice but people will tend to share them, which kills the revenue and eventually, kills the magazine ...

On Fri, 15 Jan 2021 at 12:17, Conrad, PA5Y <g0ruz@...> wrote:
I will renew my subscription, but I feel that it is about time that a PDF version was made available. I find it increasingly difficult to read as my eyesight worsens. Does anyone else feel the same way?

Regards

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Andy G4JNT via groups.io <andy.g4jnt=gmail.com@groups.io>
Sent: 15 January 2021 11:24
To: UK Microwaves groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
An excellent magazine - well-worth subscribing to.
And you can use it to practice your German too - all articles appear in both languages.



Virus-free. www.avg.com

On Fri, 15 Jan 2021 at 10:21, Roger Blackwell GM4PMK <gm4pmk@...> wrote:

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 

Roger Blackwell  GM4PMK

www.marsport.org.uk


--
Robin Szemeti - G1YFG


Re: DUBUS Magazine for 2021

Andy
 

Renewed my subscription before Christmas!

I enjoy getting a magazine although 31 years of them is starting to take up a noticeable amount of space on the bookshelves.

I used to get QST in paper then switched to online only simply for the cost and space saving. The format was such you could, with a bit of program-foo convert it to PDF (albeit 300MB per magazine) for my own use. I was happy with that as I could read my QSTs on any computer/tablet I had.  Then ARRL changed the format to something horrific with animated page turning and rustling noises that was not portable and needed an online connection to display.  That's when I cancelled QST. I don't mind a company protecting its assets but if I cannot access what I have paid for in way that suits my needs then they don't get my money.  And yes, I'm sure I wasn't the only person who figured out how to get the old QST digital format converted to PDF and some people will have been making copies available so I don't blame ARRL for changing to a more protected form. Just the version they choose was so horrible. Perhaps I should have bought an iPad and it would have been lovely and it was just the Windows version that sucked. The ARRL viewer app would not run on my old Android tablet.

Andy
MM0FMF


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Conrad, PA5Y <g0ruz@...>
Sent: Friday, January 15, 2021 4:16 AM
To: UK Microwaves groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
I will renew my subscription, but I feel that it is about time that a PDF version was made available. I find it increasingly difficult to read as my eyesight worsens. Does anyone else feel the same way?

Regards

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Andy G4JNT via groups.io <andy.g4jnt@...>
Sent: 15 January 2021 11:24
To: UK Microwaves groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
An excellent magazine - well-worth subscribing to.
And you can use it to practice your German too - all articles appear in both languages.



Virus-free. www.avg.com

On Fri, 15 Jan 2021 at 10:21, Roger Blackwell GM4PMK <gm4pmk@...> wrote:

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 

Roger Blackwell  GM4PMK

www.marsport.org.uk


Re: DUBUS Magazine for 2021

Andy G4JNT
 

I hate reading magazines on screen - there's nothing like being able to relax in a chair feet up with a paper magazine or book.   You just can't get comfortable with a laptop.   And once magazines start to give online offerings, there is the tendency for them to want to close down the paper version.



Virus-free. www.avg.com


On Fri, 15 Jan 2021 at 12:17, Conrad, PA5Y <g0ruz@...> wrote:
I will renew my subscription, but I feel that it is about time that a PDF version was made available. I find it increasingly difficult to read as my eyesight worsens. Does anyone else feel the same way?

Regards

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Andy G4JNT via groups.io <andy.g4jnt=gmail.com@groups.io>
Sent: 15 January 2021 11:24
To: UK Microwaves groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
An excellent magazine - well-worth subscribing to.
And you can use it to practice your German too - all articles appear in both languages.



Virus-free. www.avg.com

On Fri, 15 Jan 2021 at 10:21, Roger Blackwell GM4PMK <gm4pmk@...> wrote:

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 

Roger Blackwell  GM4PMK

www.marsport.org.uk


Re: DUBUS Magazine for 2021

Conrad, PA5Y
 

I used to feel the same way, but the fact is that I no longer get any enjoyment from Dubus. The print is simply too small for me to read. So, what should I do? Ask for a pdf so that I can enlarge the text to a comfortable size or just not renew? Dubus has an aging readership and I am quite sure that I am not the only one struggling. I could buy a big magnifying table lamp I suppose. I can't get on with higher magnification reading glasses, they give me headache.

Just a by-product of getting older.

73

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Robin Szemeti - G1YFG via groups.io <robin@...>
Sent: 15 January 2021 13:22
To: UKMicrowaves@groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
I enjoy getting the paper copy ... there is something "different" about having it in tangible form.  PDF is nice but people will tend to share them, which kills the revenue and eventually, kills the magazine ...

On Fri, 15 Jan 2021 at 12:17, Conrad, PA5Y <g0ruz@...> wrote:
I will renew my subscription, but I feel that it is about time that a PDF version was made available. I find it increasingly difficult to read as my eyesight worsens. Does anyone else feel the same way?

Regards

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Andy G4JNT via groups.io <andy.g4jnt=gmail.com@groups.io>
Sent: 15 January 2021 11:24
To: UK Microwaves groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
An excellent magazine - well-worth subscribing to.
And you can use it to practice your German too - all articles appear in both languages.



Virus-free. www.avg.com

On Fri, 15 Jan 2021 at 10:21, Roger Blackwell GM4PMK <gm4pmk@...> wrote:

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 

Roger Blackwell  GM4PMK

www.marsport.org.uk


--
Robin Szemeti - G1YFG


Re: DUBUS Magazine for 2021

Colin Ranson
 

Hi Conrad,

 

Hope all ok,

 

Personally I prefer a paper book, mag etc. I find I can take in and assimilate the info better.

 

I know someone who does all his reading from a kindle, each to his own.

 

73’s   Colin.

 

Sent from Mail for Windows 10

 

From: Robin Szemeti - G1YFG
Sent: 15 January 2021 12:23
To: UKMicrowaves@groups.io
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021

 

I enjoy getting the paper copy ... there is something "different" about having it in tangible form.  PDF is nice but people will tend to share them, which kills the revenue and eventually, kills the magazine ...

 

On Fri, 15 Jan 2021 at 12:17, Conrad, PA5Y <g0ruz@...> wrote:

I will renew my subscription, but I feel that it is about time that a PDF version was made available. I find it increasingly difficult to read as my eyesight worsens. Does anyone else feel the same way?

 

Regards

 

Conrad PA5Y

 

From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Andy G4JNT via groups.io <andy.g4jnt=gmail.com@groups.io>
Sent: 15 January 2021 11:24
To: UK Microwaves groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021

 

An excellent magazine - well-worth subscribing to.

And you can use it to practice your German too - all articles appear in both languages.

 

Andy

 

 

 

Virus-free. www.avg.com

 

On Fri, 15 Jan 2021 at 10:21, Roger Blackwell GM4PMK <gm4pmk@...> wrote:

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 
 
Roger Blackwell  GM4PMK
 
www.marsport.org.uk


--
Robin Szemeti - G1YFG

 


Re: DUBUS Magazine for 2021

Robin Szemeti - G1YFG
 

I enjoy getting the paper copy ... there is something "different" about having it in tangible form.  PDF is nice but people will tend to share them, which kills the revenue and eventually, kills the magazine ...

On Fri, 15 Jan 2021 at 12:17, Conrad, PA5Y <g0ruz@...> wrote:
I will renew my subscription, but I feel that it is about time that a PDF version was made available. I find it increasingly difficult to read as my eyesight worsens. Does anyone else feel the same way?

Regards

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Andy G4JNT via groups.io <andy.g4jnt=gmail.com@groups.io>
Sent: 15 January 2021 11:24
To: UK Microwaves groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
An excellent magazine - well-worth subscribing to.
And you can use it to practice your German too - all articles appear in both languages.



Virus-free. www.avg.com

On Fri, 15 Jan 2021 at 10:21, Roger Blackwell GM4PMK <gm4pmk@...> wrote:

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 

Roger Blackwell  GM4PMK

www.marsport.org.uk


--
Robin Szemeti - G1YFG


Re: DUBUS Magazine for 2021

Conrad, PA5Y
 

I will renew my subscription, but I feel that it is about time that a PDF version was made available. I find it increasingly difficult to read as my eyesight worsens. Does anyone else feel the same way?

Regards

Conrad PA5Y


From: UKMicrowaves@groups.io <UKMicrowaves@groups.io> on behalf of Andy G4JNT via groups.io <andy.g4jnt@...>
Sent: 15 January 2021 11:24
To: UK Microwaves groups.io <UKMicrowaves@groups.io>
Subject: Re: [UKMicrowaves] DUBUS Magazine for 2021
 
An excellent magazine - well-worth subscribing to.
And you can use it to practice your German too - all articles appear in both languages.



Virus-free. www.avg.com

On Fri, 15 Jan 2021 at 10:21, Roger Blackwell GM4PMK <gm4pmk@...> wrote:

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 

Roger Blackwell  GM4PMK

www.marsport.org.uk


Re: DUBUS Magazine for 2021

Andy G4JNT
 

An excellent magazine - well-worth subscribing to.
And you can use it to practice your German too - all articles appear in both languages.



Virus-free. www.avg.com


On Fri, 15 Jan 2021 at 10:21, Roger Blackwell GM4PMK <gm4pmk@...> wrote:

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 

Roger Blackwell  GM4PMK

www.marsport.org.uk


DUBUS Magazine for 2021

Roger Blackwell GM4PMK
 

The usual reminder that, if you wish to received DUBUS Magazine in 2021, subscriptions are due.

UK readers can find all the necessary details at www.dubus.org/uksubs.htm.

Non UK readers should look at www.dubus.org/subs.htm

Any questions, please contact me off list at dubus@...

73

-- 

Roger Blackwell  GM4PMK

www.marsport.org.uk


Audio Beacon Keyer - voltage regulator

Andy G4JNT
 

The only component the Chipbank can't help with.

I've just noticed, annoyingly, that Farnell don't have the LM3480-5.0 SOT23 packaged voltage regulator i.  It's available for back order 8 Feb  (They have other voltages, and the thing will run just as well off 3.3V if your COM Port programming interface is happy with this voltage level )

An alternative WITH THE SAME CONNECTIONS  is the ZMR500FTA.   The most popular SOT23 regulator is the MCP1703 which has DIFFERENT pin connections.   (It could probably be squeezed on by rotating 120 deg, but that's just bodgery.  The sort of thing you only do if you already have some.)

RS have plenty of LM3480 in stock - and probaly the otehr suppliers do too.


Virus-free. www.avg.com


Re: PicKit3 Annoyance on close down

Andy G4JNT
 

No it's not.
Confusing myself.  
The one in MPLAB-X is actually an older version, and had to do the Google search for a more up to date one.




On Thu, 14 Jan 2021 at 19:38, Andy Talbot <andy.g4jnt@...> wrote:
It is also in the MPLABX download, and that's a later version.  
 
It's worth looking at the MPLABX download - although it's awful bloatware, there are a lot of utilities buried in it's deep subdirectory structure.  You just need to do a bit of detective work to find them



On Thu, 14 Jan 2021 at 19:31, Andy Talbot <andy.g4jnt@...> wrote:
It's in the Microchip archives, but near impossible to find by delving down into them.   When I needed it, had to resort to Google which did a better job and found this 





On Thu, 14 Jan 2021 at 19:21, Greg - ZL3IX <zl3ix@...> wrote:
I'm interested to see that there is a standalone program for running PicKit 3. I had thought that a full installation of MPLAB was necessary. I was reluctant to install MPLAB again as I've had such bad experiences with it in the past. Currently I'm using programming hardware and software by the UK company Fored (Forest Electronic Developments) but I've had a lot of problems with their products as well, so am looking for an alternative. The latest problem is that the programmer refuses to recognise 18F25K22 and will not program them. Has anyone used PicKit3 (or 4) to program these?


Re: PicKit3 Annoyance on close down

Andy G4JNT
 

It is also in the MPLABX download, and that's a later version.  
 
It's worth looking at the MPLABX download - although it's awful bloatware, there are a lot of utilities buried in it's deep subdirectory structure.  You just need to do a bit of detective work to find them



On Thu, 14 Jan 2021 at 19:31, Andy Talbot <andy.g4jnt@...> wrote:
It's in the Microchip archives, but near impossible to find by delving down into them.   When I needed it, had to resort to Google which did a better job and found this 





On Thu, 14 Jan 2021 at 19:21, Greg - ZL3IX <zl3ix@...> wrote:
I'm interested to see that there is a standalone program for running PicKit 3. I had thought that a full installation of MPLAB was necessary. I was reluctant to install MPLAB again as I've had such bad experiences with it in the past. Currently I'm using programming hardware and software by the UK company Fored (Forest Electronic Developments) but I've had a lot of problems with their products as well, so am looking for an alternative. The latest problem is that the programmer refuses to recognise 18F25K22 and will not program them. Has anyone used PicKit3 (or 4) to program these?


Re: PicKit3 Annoyance on close down

Andy G4JNT
 

It's in the Microchip archives, but near impossible to find by delving down into them.   When I needed it, had to resort to Google which did a better job and found this 





On Thu, 14 Jan 2021 at 19:21, Greg - ZL3IX <zl3ix@...> wrote:
I'm interested to see that there is a standalone program for running PicKit 3. I had thought that a full installation of MPLAB was necessary. I was reluctant to install MPLAB again as I've had such bad experiences with it in the past. Currently I'm using programming hardware and software by the UK company Fored (Forest Electronic Developments) but I've had a lot of problems with their products as well, so am looking for an alternative. The latest problem is that the programmer refuses to recognise 18F25K22 and will not program them. Has anyone used PicKit3 (or 4) to program these?


Re: PicKit3 Annoyance on close down

Greg - ZL3IX
 

I'm interested to see that there is a standalone program for running PicKit 3. I had thought that a full installation of MPLAB was necessary. I was reluctant to install MPLAB again as I've had such bad experiences with it in the past. Currently I'm using programming hardware and software by the UK company Fored (Forest Electronic Developments) but I've had a lot of problems with their products as well, so am looking for an alternative. The latest problem is that the programmer refuses to recognise 18F25K22 and will not program them. Has anyone used PicKit3 (or 4) to program these?


Re: GB3PS 23cm voice repeater and beacon back on air

John Fell
 

Why Vertical polarisation  John ?

John
G0API
(can't hear it so far down ear)

On Thu, 14 Jan 2021 at 16:04, g4bao <john@...> wrote:
After a long absence the Camb-Hams 23cm FM voice repeater GB3PS at Barkway in Herts IO92XA is back on the air.

I've already worked 4 stations on it so there's activity. The IC9700 effect.

Output 1297.075MHz, input 1291.075
25W EIRP vertical polarisation. with an antenna close to the top of the tower
Access with 77Hz CTCSS tone.
Continuous beacon mode.
Reports to
http://beaconspot.uk  

Great work by the two Phils G8MLA and G4BIK and anyone else involved 


GB3PS 23cm voice repeater and beacon back on air

g4bao
 

After a long absence the Camb-Hams 23cm FM voice repeater GB3PS at Barkway in Herts IO92XA is back on the air.

I've already worked 4 stations on it so there's activity. The IC9700 effect.

Output 1297.075MHz, input 1291.075
25W EIRP vertical polarisation. with an antenna close to the top of the tower
Access with 77Hz CTCSS tone.
Continuous beacon mode.
Reports to
http://beaconspot.uk  

Great work by the two Phils G8MLA and G4BIK and anyone else involved 


Re: Audio CW / Tone / Chirp keyer

Ian Pawson G0FCT
 

Mine too, many thanks Andy
Ian G0FCT


On Thu, 14 Jan 2021 at 12:14, Martin Phillips G4CIO <martin@...> wrote:
Mine too. Ordered midday yesterday, on the doormat at 08:30 today. Better than A****n prime (which reminds me to cancel my accidental subscription)!

On 14/1/21 11:46 AM, mike G6TRM via groups.io wrote:

Hi Andy,
my board arrived today, many thanks for your efforts.
 
73
 
mike G6TRM
----- Original Message -----
From: Andy G4JNT
Sent: Monday, January 11, 2021 2:25 PM
Subject: [UKMicrowaves] Audio CW / Tone / Chirp keyer


The PCBs have now been delivered, and I've made one up to test - works OK.

So sales of PCBs with programmed PICs  can now go live.

UK Purchasers will find a PayPal button on my website on these pages
Price is £9.00 for one. reducing progressively for up to 4
If you want more than 4, contact me.

If you want the NON-CW version, KEYER3  that sends sequential tones, please state this at the of ordering, the price is the same and you can have a mixture of types within the multiple-price.

NOW ............
Due to the faff/chaos/balls-up/megamess that is Brexit and the VAT changes, I can't add direct payment options for overseas purchasers (and this may even include GI, not too sure), so please contact me for more info.

I've got 100 PCBs , have 8 spare PIC devices ready to go with 50 more on order from RS - which should arrive tomorrow, but there could be delays.  

Now, off the post office for padded envelopes and stamps



Re: Audio CW / Tone / Chirp keyer

Martin Phillips G4CIO
 

Mine too. Ordered midday yesterday, on the doormat at 08:30 today. Better than A****n prime (which reminds me to cancel my accidental subscription)!

On 14/1/21 11:46 AM, mike G6TRM via groups.io wrote:

Hi Andy,
my board arrived today, many thanks for your efforts.
 
73
 
mike G6TRM
----- Original Message -----
From: Andy G4JNT
Sent: Monday, January 11, 2021 2:25 PM
Subject: [UKMicrowaves] Audio CW / Tone / Chirp keyer


The PCBs have now been delivered, and I've made one up to test - works OK.

So sales of PCBs with programmed PICs  can now go live.

UK Purchasers will find a PayPal button on my website on these pages
Price is £9.00 for one. reducing progressively for up to 4
If you want more than 4, contact me.

If you want the NON-CW version, KEYER3  that sends sequential tones, please state this at the of ordering, the price is the same and you can have a mixture of types within the multiple-price.

NOW ............
Due to the faff/chaos/balls-up/megamess that is Brexit and the VAT changes, I can't add direct payment options for overseas purchasers (and this may even include GI, not too sure), so please contact me for more info.

I've got 100 PCBs , have 8 spare PIC devices ready to go with 50 more on order from RS - which should arrive tomorrow, but there could be delays.  

Now, off the post office for padded envelopes and stamps


2561 - 2580 of 62970