Re: G3WDG Filters for 2 mtr to 10GHz receiver

Robin Szemeti - G1YFG

Hi Andy,

No they were turned from brass and silver plated, with a thicker top section for a bit more "purchase" for the M4 screw.

I have a lathe and some brass bar, and I even have some filters ... but they are all soldered down so unable to measure the internals.

I did however fix my DDK004 last night (having finally taken the last child back to uni) .. its only taken me 25 years or so to get around to that!

On Mon, 17 Jan 2022 at 09:08, Andy <mm0fmf@...> wrote:
Maybe a dumb question but are the sizes not in the instructions?  I remember there was a section about how to cut and mount the probes that solder to the PCB.  I'm fairly sure they'll be a standard pipe cap size and the top was drilled and tapped for an M4 tuning screw with lock nut.

From: <> on behalf of Dennis_G6YBC via <>
Sent: Monday, January 17, 2022 12:59 AM
To: <>
Subject: Re: [UKMicrowaves] G3WDG Filters for 2 mtr to 10GHz receiver
Hi Robin 

Sadly no,  I have the kit but these are missing so
was hoping someone here would have an idea of what I mean. 


Dennis G6YBC 

Robin Szemeti - G1YFG

Join to automatically receive all group messages.