Re: Nano VNA SAA-2N and G3XDY QRO filter


John Quarmby
 

Just select 4GHz as the upper frequency limit when setting the sweep range and do a calibration run prior to measurement. Dynamic range and accuracy may be a bit below spec but it does provide a good indication of what is going on.

73

John G3XDY

On 09/03/2021 11:23, Brian Howie GM4DIJ wrote:
In message <29724.1615033813404469843@groups.io>, Dave G1EHF via groups.io <david.j.austen=btinternet.com@groups.io> writes
The VNA SAA-2 series use the ADF4350 as source oscillators, which in
theory will go to 4.4 GHz. Mine goes easily to 4 GHz, although the
noise floor does start to increase above 3 GHz. That said, it can
characterise a 9 cm filter or antenna easily if you're not after 70 dB
of dynamic range!
73, Dave G1EHF
I got a SAA-2N recently . Is there anything specialĀ  you have to do to get it to go up there ?

Cheers

Brian GM4DIJ
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Join UKMicrowaves@groups.io to automatically receive all group messages.