Re: Supporting the dish feed


Denis Stanton G0OLX
 

John
Thank looks like a very good solution with minimal metal in the way of incoming rf.
Best 73’s
Denis
G0OLX

On 23 Feb 2021, at 09:24, John Lemay <john@carltonhouse.eclipse.co.uk> wrote:

Morning all

Supporting a dish feed - one arm, three or four ??

I've recently completed a new prime focus mesh dish. I made up the usual
four arms to make a quadruped to support the feed from the rim. But it
looked a bit tricky to adjust the feed position so temporarily I provided
instead a single support close to the axis of the dish. A simple series of
holes on this arm gave me easy options for moving the feed to and fro.

I made a small hole in the mesh next to the hub to pass the cable through.
That makes it obvious that the feed cable can be shorter than one which
follows one of four arms to the rim.

I'm happy with the mechanical side of things (such as the single arm needs
to be stiffer), but what are the pros and cons as far as RF performance is
concerned ?

TIA

John G4ZTR



--
This email has been checked for viruses by AVG.
https://www.avg.com





<IMG_2424.JPG>

Join UKMicrowaves@groups.io to automatically receive all group messages.