Re: Carp (anag) design


John Worsnop
 

Yes, I've made cables like that myself. A true D'OH!!! Moment.
Just take a fine file and dress the points of the SMA nut by about half a mm. Then it'll fit through the bnc nut and you can still use a spanner on the SMA

73 john

On Thu, 14 May 2020, 09:07 Paul Randall G3NJV, <paulfrandall@...> wrote:
Oh that's funny! Gave me a good laugh to start the day. 



Sent from my Samsung Galaxy smartphone.



-------- Original message --------
From: Martin Phillips G4CIO <martin@...>
Date: 11/05/2020 11:37 (GMT+00:00)
Subject: Re: [UKMicrowaves] Carp (anag) design



On 11 May 2020 11:31:20 BST, Andy G4JNT <andy.g4jnt@...> wrote:
Can you post a photo. 

On Mon, 11 May 2020 at 11:29, Martin Phillips G4CIO <martin@...> wrote:
I've just purchased some very nicely made SMA to BNC bulkhead connectors
to mount some kit in a box. The nut for the BNC is behind the fitting.
How do you get the nut off the cable when it's too small to slide over
the SMA?

Doh!




--
Andy 'JNT (out Boris Walking)

--
Martin Phillips

Join UKMicrowaves@groups.io to automatically receive all group messages.