Re: Mesh size for 10GHz
toggle quoted messageShow quoted text
30/4 would be more like 7-8 mm and the usual 'Rule-of-Thumb' is 1/10 wavelength or 3 mm.
On Saturday, October 19, 2019, 1:37:49 PM CDT, John E. Beech <john@...> wrote:
I don't think it will make any difference. The criterium for a mesh dish is that the mesh size must be smaller than a quarter wavelength at the frequency in use ie < 15 mm for 10 GHz.
de John G8SEQ
> -------Original Message-------
> From: Dom Baines M1KTA via Groups.Io <email@example.com>
> To: UKMicrowaves@groups.io <UKMicrowaves@groups.io>
> Subject: [UKMicrowaves] Mesh size for 10GHz
> Sent: Oct 19 '19 18:27
> Was suggested ask here so here goes.
> Bit of a rookie so might be a daft question:
> If using a mesh reflector for a dish with size 2.5mm x 4.5mm does
> this mean it will be fine in one plane but might be very lossy in the
> other at 10Hz as 1/10th is c3.0mm. But by how much?
> Should I cross the mesh so the centre (opposite prime focus) at least
> has no opening larger than 2.5mm ?
> Solid dish had some wind-age issues and moved (understatement) so got
> to rethink.