Re: ADF4351 MUX Pin
Brian Flynn GM8BJF
I have set up one of the "black" Chinese boards and controlling it with the AD evaluation software using a Cypress CY7C68013A USB interface board I can select the different MUX out signals. The R and N divider outputs are both there. The R didvider output signal is a better defined pulse than the N one which is of much shourter duration. I have found that the Selectable MUX out is very useful in the past for debugging these boards. I recently destroyed the chip on one board, owing to a fit of carelesness, and had to replace it. The mux out was useful in that situation for testing..
Details of using the Cypress CY7C68013A USB interfaceare are at: