It appears that Deane Kidd's parts inventory is *still* in limbo :( So, does anyone have a new (or good used) carrying handle for my 564, and one of those tiny push-on lever switch knobs for a 3B3? Th

Has anyone replaced the Tek 576 CT fiber optic readout display lamps, with LED's ?

Hello All, I have for sale a Tektronix TDS2014 100 MHz, 4 channel, oscilloscope. It passes all self tests and self calibration and has a good display. There are some cracks around the edges of the cas

As I understand it, the ONLY reason for the existence of the delay lines in the vertical amps was to allow the trigger to be captured early, before the waveform, allowing the display of the trace lead

The "Re: [TekScopes] NEW TOPIC: Outstanding Rockland Instruments 7000 Plugin; WAS: Slightly OT- Wavetek 7530B?" post got me thinking about "rom rot" and wondering if anyone has archived the eprom imag

Still chasing a working copy or original of the Diagnostics Tape for the 4041. DaveB, NZ

Tektronix was incorporated 75 years ago on January 2, 1946. The company name was Tekrad. On February 4, 1946, 75 years ago today, the name was changed to Tektronix. We published this story in our Janu

Someone here (I believe) was preparing a BOM for the Jared Cabot TM500 tester but with DigiKey stock numbers. Has that been completed? And, one capacitor P/N was incorrect; what was that? Note that in

Looking for a Tek 172 module "front porch" plug-in. If you have a 172 collecting dust .... Please contact me Off-List, thank you, rick

I had and foolishly discarded a digital electric clock years ago. Just like the NLS meter, it used the same edge lit plastic card display and telephone stepping relays. A motor tripped a micro switch

Has anyone ever seen such a thing as a 5-1/2 digit digital panel meter (DPM) for voltage, that doesn't cost a fortune? 4-1/2 digit and less have been available for decades, but I don't know of higher

I have had this oscilloscope cal set since 1980. I have the manuals for the 106, 184, and 191. They are in excellent physical condition and have not been abused. Tektronix 067-0502-00 Ser# 000974 no o

does anyone know where I can buy a pair of beam lead mixer diodes. i have a parrallel gap welder.

We have a lot of Tek parts and CRT's from 7000/5000 series and some 4xx series portable scopes. Happy to sell, swap and trade bits if it will help get everybody's gear up and running, and we have a VE

Hi, reading Stan's impressive and very interesting book "Selecting and Restoring a Classic" I have come across the section where he describes in a very precise manner how to clean and wash an instrume

I bought from a guy on eBay these 3 items. I wanted a PG50xx for a while, and this one was reasonably priced. Still looking for a PG506 BTW. He was also selling an AM503 along with a P6303. I already

Hi everyone, I've got a 7603 with no trace and an odd - to me at least - fault. The - ve rails are just under the - 15 and - 50v specified. The +ve rails on the other hand are at +18, +75 and +179v ra

Well, I might be a bit rusty, but it seems I can still repair things :-) In this case, the versatile 2101 pulse generator from 1970. I had no idea of its condition, so first off, I wiggled all the soc

Lawrance A. Schneider added the album P6139a: Disassembly

Sorry about the small hair on the white background mat. My old eyes did not see it until exploded on my computer screen. The cable (transmission line) measures 1.3 meter and 270 ohms. The picture with