Is there any source for the slip-on "grabbers" for the P6105 probe. These are Tek P/N 013-0107-0. I seem to have lost one. This will teach me not to keep a trash bucket under the scope on the scope-mo

Hi, I recently adquire this unit I had a diplexder and WG so to be able to increase the 21GHz frequency but this unit does not go over the 21GHz limit. It does not appear to have any options but it do

Hi Group, Some years ago I got 2 basket case scopes. The problems involved a leaky diode and bad trigger chip in one and for both I decided to remove the batteries, and not have them internal to the s

Hello All I have a 2247a and when I put it in the voltmeter mode and pick Peak to Peak the cursers are not touching the peaks of the wave form. Is this normal or do i need to get the service manual ou

All: Looking for a replacement Probe tip for P6133 - This could be 206-0265-12 or 206-0265-13. New or Good Used would be fine. Anyone who has and extra one and would be willing to sell it, please cont

The following photos have been uploaded to the Tek 492BP album of the TekScopes@groups.io group. Tek_492_SwitchSettings.jpg By: d.schilling.net@...

Hi guys ! The newbie is back ! Some news : PSU of the 485 delivers proper Low Voltage, I had to adjust the calibrator amplitude (the 5V was out of spec +/- 5mV). I've been checking (visually) several

I have read a copy of the email from Mark Fletcher very carefully line by line. (although I am annoyed I did not receive a copy sent to me directly). As I understand it these price increases DO NOT AP

Carl Hallberg added the album Tektronix 214 storage scope: Converted internal battery operation to external 12 Volts source #Tektronix214 The following photos have been uploaded to the Tektronix 214 s

Is this relevant to this group? [HP-Agilent-Keysight-equipment] Massive groups.pricing increase - we need a plan B. However, it seems that groups.io are going to be changing their pricing https://beta

The ongoing discussion of the power supply tester has caused me to investigate the TM-500 series. I found it interesting, was able to get some items, and am interested in buying an SC501 scope and oth

Greetings to all, I have an old T912 that no longer shows traces on the CRT screen. I checked and the 2.7 KV on the cathode of the CRT is missing. By disconnecting the diodes CR463 and CR465 from the

The coketron, a CRT made from a coke bottle, made me smile her in Albuquerque... -- John Griessen -- building lab gear for biologists

I entered all 72 tracking numbers to see what was going on with domestic book deliveries. One package is awaiting another attempt at delivery to the recipient in Fairfield OH. These 15 of 72 packages

If you have NOT received Peter Keller's book by now please contact me off-list at dennis at ridesoft dot com and I will see if I can locate it for you. Include your zip code in your email. If you DID

Hi, Have a late model 2465B. Noticed today that the focus point for the readout is at one point on the focus knob. But it I also want to get an optimal focus for the trace, I need to turn the knob to

Dear group, I am fixing a deaf 7L18, it is responsive to a 510MHz signal injected into the second mixer, I still have to test the 510MHz IF, I am anticipating that the first mixer diode has failed (li

The first of the international shipments of Peter's books was delivered this morning in The Netherlands. Another one is out for delivery this morning in The Netherlands. The one that went to Japan is

Hello Guys, i need help with my Tek 576. Theres something pretty strange with the step generator... On some settings of the number of steps the lines start to flicker/jump around like something is not

Hi Tek folks, Working on a 760 D, when I got it the power supply was cycling and the high voltage would not come up. Lifting the output of the quadrupler let the low voltage supply come up, so I assum