The DF1 can format the list display in octal or hex (instead of just binary). The DF2 can format the list display in octal, hex, ASCII, or GPIB. They are generally not troublesome, but they sometimes

One small thing to keep in mind, if your only experience with any scope is via the repair center, of COURSE they all seem broken. who sends in good ones to fix? The surplus ones showing up on ebay and

I can remember the Hughes Memoscope with its horrible dark green cabinet. Yes, it was first, before Tek and before HP. Took Tek by surprise and it came out in about 1962 or 1963 when I was working in

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the TekScopes group. File : /Storage CRO Tube operation.gif Uploaded by : DougHale@... De

Both a .tig and a .gif have been uploaded to http://groups.yahoo.com/group/TekScopes/files/ (Thanks Don) Doug Hale

Yes, "Storage Cathode-Ray Tubes and Circuits", by Chuck Devere. I have a list of the Concepts books at: http://www.spies.com/~dd/concepts.html Another book to look for is: "The Cathode-Ray Tube", by P

Does 7403 has a linear power supply right? Some may say that this is an advantage because it is easier to repair. Others say it is not good because it is quite a bit heavier. BTW does the 7603 have a

In addition to Tek CRTs, we have transistors, ICs, disply filters (the elusive blue ones, among others), case parts, subassemblies, ferrite power transformers, pots, resistor networks and other cross-

Can anyone suggest a source for the Craig Deoxit spray? I can't find it local here in St. Louis and the catalogs I have do not carry that brand. Stephen

Sunday, Sept 9. 2001 Does anyone have a source for Tektronix blue/teal case paint for cosmetic repairs? Thanks. Dick Jones Toronto, Canada

Is there any source of Manuals in pDF form that I could use to get manuals or my 7633,7904A and the owners/service manual for a 7A13? I am only a hobbiest so I do not want to pay too much for the manu

Hello! Yes, it HAS to do with Tektronix... just read ;-) I have just returned from a trip to the 'Cote d'Azur' (Blue Coast) in France (I am from Spain and it is about 850km from my home). I have enjoy

Hello! Please, could you tell me which one would you take if offered both at same price?. Pros and cons? Thanks! JOSE ---------------------------------------------------------------------- 73 EB5AGV /

I know of at least one person who DID get permission to copyright Tek service manuals, and that is Deane Kidd. He can usually supply originals, but when impossible, will supply a copy, and with the pe

Hi to All TekScope Subscribers, I would just like to pass on my condolences to everyone one and say that my heart goes out to you and your famillies, friends and fellow countrymen. Words cannot expres

My new (new to me)scope did not have filter material in the intake bracket. Being clueless on most facets of scopes, including the repoduction debate currently raging, what is the best material and de

Can anyone help me find these parts? What I need are: 155-0067-02 Regulator IC for 7904, 7854 336-1299-00 Grey knob for 7A26, and others 336-1308-00 Red calibration knob for 7A26, and others 384-1178-

I have tried to send this message before but it never got sent to the list. One more try? Can anyone help me find these parts? What I need are: 155-0067-02 Regulator IC for 7904, 7854 336-1299-00 Grey

After reading John Miles' recent post informing of the "resources for you" section of the Tek web site, I requested via that channel availability and pricing for a TAS 465 service manual. I've been sp

Well, I've read all the posts on this subject and I keep flip-flopping between it's OK to copy and it's not OK to copy. I see valid points to both sides. Stan is in the unique position of having worke