Type 454 sweep speed?


shalopt
 

OK before I try locating my manual. Have any of the group seen this.
A few days ago while checking a signal generator I noticed the sweep
appeared to be running at 10 times. The 10X switch was in the normal
1X position.
I rechecked today with the 1KHz cal signal, sweep set at 2ms one cycle
displays as 5 divisions (10ms) rather than 1ms.
Now switching to 10X expands 10 times, so first thought bad switch
is not the problem.
Suggestions anyone.
gary g


shalopt
 

Oh the scope has never been open been on my desk same spot for
20 years.
gg