Tek 2430A collapsed screen image
Does anyone know what can cause the screen image to collapse and only show a large dot in the middle of the screen on a TEK 2430? I'm new to this group. I post a photo in "Tek 2430A collapse Screen image"
Hi,toggle quoted messageShow quoted text
This could be a lot of things. But the first thing is to check the power
supplies. If you don't have the service manual, first get it from for
example TekWiki: http://w140.com/tekwiki/wiki/2430
Check all the power rails for proper voltage and ripple. If they are not
good, chances are that you have bad caps in the PSU, common for this model
r have a shorted cap on one of the boards.
Also check the interconnecting cables between the boards.
These are the checks I would do first.
<firstname.lastname@example.org> ezt írta (időpont: 2020. okt. 21., Sze, 6:39):
Does anyone know what can cause the screen image to collapse and only show
Hi Szabolcs,toggle quoted messageShow quoted text
By any chance, are you related at all to the violinist Joseph Szigeti?
Prof. Thomas H. Lee
Allen Ctr., Rm. 205
350 Jane Stanford Way
Stanford, CA 94305-4070
On 10/21/2020 02:01, Szabolcs Szigeti wrote: