Date
1 - 8 of 8
Looking for 366 1280 00 (trig level knob for 465B)
|
Doug Gordon
Hi,
Have tried Sphere and Qservice with no luck. Hoping someone here has a lead. Thanks. Doug Gordon Sent from Mail for Windows 10 -- This email has been checked for viruses by AVG. https://www.avg.com
|
|
|
|
aldue
I shall check my stock tonight.
toggle quoted messageShow quoted text
On Fri, Oct 9, 2020, 4:18 PM Doug Gordon <dmgordon@pacbell.net> wrote:
Hi,
|
|
|
|
If you don’t find one, I may have a good used one. Let me check my donor scopes.
toggle quoted messageShow quoted text
Michael W. Lynch 11993 Wildcat Hollow Road Dardanelle, AR 72834 From My I-Pad 479-477-1115 mlynch003@yahoo.com mlynch002@gmail.com mlynch002@protonmail.com
On Oct 9, 2020, at 16:15, aldue <garydirkse@gmail.com> wrote: --
Michael Lynch Dardanelle, AR
|
|
|
|
aldue
I looked at my 466 parts mule. The trigger level knob must have gone to one
of my working 468's, 464 or 466. On Fri, Oct 9, 2020, 6:33 PM Michael W. Lynch via groups.io <mlynch003= yahoo.com@groups.io> wrote: If you don’t find one, I may have a good used one. Let me check my donor
|
|
|
|
dabono@...
I don't have an exact replacement, but I can get one that's pretty close (my 465B also had a cracked trigger level knob). I don't know the part number, unfortunately.
The main difference is the one I used has a "skirt" at the base with a white dot indicator. The original is a straight taper, with a white line indicator on the side. But they both fit the same size shaft, and have the same size opening for the trigger slope knob. PM me if interested and I can send a picture.
|
|
|
|
Jan Weber
Hi Doug,
toggle quoted messageShow quoted text
I have one of these, see the picture in the "465knob" gallery on the TekScopes group.io page. I'm located in Germany. Regards Jan Doug Gordon <dmgordon@pacbell.net> schrieb am Fr., 9. Okt. 2020, 22:18:
Hi,
|
|
|
|
n4buq
There may be one of those left on this page:
toggle quoted messageShow quoted text
https://www.avdweb.nl/div/tektronix-465-parts Thanks, Barry - N4BUQ
----- Original Message -----
From: "Jan Weber via groups.io" <jancarlweber=googlemail.com@groups.io>
|
|
|
|
Doug Gordon
Hello. The knob has been found. Thanks to the list and all those nice folks who responded to my request.
Best regards, Doug Gordon -- This email has been checked for viruses by AVG. https://www.avg.com
|
|
|