545b/l20


Dave Henderson <nr1dx@...>
 

According to the 1L5 manual it says that a modification is required for the 1L5 to be used with the 545 scopes. Sounds like you have to move a wire from the R1153 / R1152 junction to the other end of R1153 which changes the +225 volt supply to the "Vertical Signal Out CF" whatever that means 8^).Sounds like it will work without the mod but you get a lopsided (distorted) display on CW signals.

Dave
NR1DX

At 04:58 PM 6/22/2003 -0700, kathnrich wrote:
Hi all;
Will a Tek 545b work with a 1L5, or a L20 spectrum analysers?
Thanks,,,Rich








Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Craig Sawyers <c.sawyers@...>
 

According to the 1L5 manual it says that a modification is
required for the
1L5 to be used with the 545 scopes.
Absolutely true. And although there is no mention of this in the 1L20
manual *exactly* the same problem occurs, with the same cure.

Craig


kathnrich <kathnrich@...>
 

Hi all;
Will a Tek 545b work with a 1L5, or a L20 spectrum analysers?
Thanks,,,Rich


Stan & Patricia Griffiths <w7ni@...>
 

Yes.

Stan
w7ni@easystreet.com

----- Original Message -----
From: "kathnrich" <kathnrich@goes.com>
To: <TekScopes@yahoogroups.com>
Sent: Sunday, June 22, 2003 4:58 PM
Subject: [TekScopes] 545b/l20


Hi all;
Will a Tek 545b work with a 1L5, or a L20 spectrum analysers?
Thanks,,,Rich








Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/