DC508 HELP with PHOTOS option 7


Miguel Work
 

Hi, I had bought a DC508 option 1 for my TR502 7L14. I need to install option7, TM503 is option7, manual is very clear, but It will be very useful a detailed photos from cables and connector. Has some body one and can post some photos?
Thanks
Regards

Miguel


 

Hi Miguel,

TM503 is just a 3 slot mainframe. That can't possibly be what you are referring to as Option 7. It might be part of the option since, presumably, you will want to have the TR502 and the DC508 in the same TM503 main frame. There are probably a few interconnections you need to make on the back plane of the TM503 between the TR502 and the DC508 to make them work together.

Dennis Tillman W7PF

-----Original Message-----
From: Miguel Work
Sent: Wednesday, March 06, 2019 11:54 AM

Hi, I had bought a DC508 option 1 for my TR502 7L14. I need to install
option7, TM503 is option7, manual is very clear, but It will be very useful a
detailed photos from cables and connector. Has some body one and can post
some photos?
Thanks
Regards

Miguel


--
Dennis Tillman W7PF
TekScopes Moderator


Miguel Work
 

Thanks Dennis,

Mainframe is option7 (rear interconnected) , I only need to modify DC508 to option 7. Board is installed but without components.

https://groups.io/g/TekScopes/photo/86278/3?p=Name,,,20,1,0,0

https://groups.io/g/TekScopes/photo/86278/0?p=Name,,,20,1,0,0


https://groups.io/g/TekScopes/album?id=86278

Thanks

Regards

Miguel



-----Mensaje original-----
De: TekScopes@groups.io [mailto:TekScopes@groups.io] En nombre de Dennis Tillman W7PF
Enviado el: jueves, 7 de marzo de 2019 7:13
Para: TekScopes@groups.io
Asunto: Re: [TekScopes] DC508 HELP with PHOTOS option 7

Hi Miguel,

TM503 is just a 3 slot mainframe. That can't possibly be what you are referring to as Option 7. It might be part of the option since, presumably, you will want to have the TR502 and the DC508 in the same TM503 main frame. There are probably a few interconnections you need to make on the back plane of the TM503 between the TR502 and the DC508 to make them work together.

Dennis Tillman W7PF

-----Original Message-----
From: Miguel Work
Sent: Wednesday, March 06, 2019 11:54 AM

Hi, I had bought a DC508 option 1 for my TR502 7L14. I need to install
option7, TM503 is option7, manual is very clear, but It will be very
useful a detailed photos from cables and connector. Has some body one
and can post some photos?
Thanks
Regards

Miguel


--
Dennis Tillman W7PF
TekScopes Moderator


Miguel Work
 

Thanks Dennis,

Mainframe is option7 (rear interconnected) , I only need to modify DC508 to option 7. Board is installed but without components.

https://groups.io/g/TekScopes/photo/86278/0?p=Name,,,20,1,0,0

https://groups.io/g/TekScopes/photo/86278/5?p=Name,,,20,1,0,0

https://groups.io/g/TekScopes/photo/86278/6?p=Name,,,20,1,0,0

https://groups.io/g/TekScopes/album?id=86278


Thanks

Regards

Miguel



-----Mensaje original-----
De: TekScopes@groups.io [mailto:TekScopes@groups.io] En nombre de Dennis Tillman W7PF Enviado el: jueves, 7 de marzo de 2019 7:13
Para: TekScopes@groups.io
Asunto: Re: [TekScopes] DC508 HELP with PHOTOS option 7

Hi Miguel,

TM503 is just a 3 slot mainframe. That can't possibly be what you are referring to as Option 7. It might be part of the option since, presumably, you will want to have the TR502 and the DC508 in the same TM503 main frame. There are probably a few interconnections you need to make on the back plane of the TM503 between the TR502 and the DC508 to make them work together.

Dennis Tillman W7PF

-----Original Message-----
From: Miguel Work
Sent: Wednesday, March 06, 2019 11:54 AM

Hi, I had bought a DC508 option 1 for my TR502 7L14. I need to install
option7, TM503 is option7, manual is very clear, but It will be very
useful a detailed photos from cables and connector. Has some body one
and can post some photos?
Thanks
Regards

Miguel


--
Dennis Tillman W7PF
TekScopes Moderator


Ed (SCSKITS)
 

To use option 7, you will have to add the components to the multiplier board, including the two ribbon cable connectors. You will then need to make up the mating cables and solder the wires to points on the main circuit board. There may also be some trace cuts on the main circuit board. The DC508 manual should have a section on option 7 and how it interconnects with the main board. Getting the manual for the DC508 is the first step...


Miguel Work
 

Thanks Scskits, I will pots some photos, the first attempt doesn’t works. Lemo cable has some wires broken.

Regards

Miguel

-----Mensaje original-----
De: TekScopes@groups.io [mailto:TekScopes@groups.io] En nombre de scskits
Enviado el: viernes, 8 de marzo de 2019 23:16
Para: TekScopes@groups.io
Asunto: Re: [TekScopes] DC508 HELP with PHOTOS option 7

To use option 7, you will have to add the components to the multiplier board, including the two ribbon cable connectors. You will then need to make up the mating cables and solder the wires to points on the main circuit board. There may also be some trace cuts on the main circuit board. The DC508 manual should have a section on option 7 and how it interconnects with the main board. Getting the manual for the DC508 is the first step...


Miguel Work
 

Thanks!! Now is working, some traces in option board were shorted, manufacturing defect in PCB, I was going crazy, I almost did not see it.

Some photos

https://groups.io/g/TekScopes/album?id=86699

https://groups.io/g/TekScopes/album?id=86278



-----Mensaje original-----
De: TekScopes@groups.io [mailto:TekScopes@groups.io] En nombre de scskits
Enviado el: viernes, 8 de marzo de 2019 23:16
Para: TekScopes@groups.io
Asunto: Re: [TekScopes] DC508 HELP with PHOTOS option 7

To use option 7, you will have to add the components to the multiplier board, including the two ribbon cable connectors. You will then need to make up the mating cables and solder the wires to points on the main circuit board. There may also be some trace cuts on the main circuit board. The DC508 manual should have a section on option 7 and how it interconnects with the main board. Getting the manual for the DC508 is the first step...


 

Hi Miguel,
Because of your posts about Option 7 I decided to finish hooking up my DC508 Option 7 to my TR502 Tracking Generator. The one thing I am missing is the wiring diagram for the TM503 Main Frame.

The interconnect wiring diagram should be on a sheet of paper contained in the Field Modification Kit 040-0789-00. I have jumpers from a different Field Modification Kit so all I need to know is which DC508 rear interconnect contacts go to which TR502 rear interconnect contacts.

Can you send me a copy of the sheet with the wiring diagram interconnections from 040-0789-00.

Dennis Tillman W7PF

-----Original Message-----
From: Miguel Work
Sent: Wednesday, March 06, 2019 11:54 AM

Hi, I had bought a DC508 option 1 for my TR502 7L14. I need to install
option7, TM503 is option7, manual is very clear, but It will be very useful a
detailed photos from cables and connector. Has some body one and can post
some photos?
Thanks
Regards

Miguel



--
Dennis Tillman W7PF
TekScopes Moderator


Miguel Work
 

Hi Dennis,

Se page 17-3

http://dadaelectronics.com.au/doc/Audio/Tektronix/TM500/TM5X_RIB_FREE.pdf

You need to interconnect 14B, 15B, 16B, 17B, 18B and 18A

Best regards

Miguel


-----Mensaje original-----
De: TekScopes@groups.io [mailto:TekScopes@groups.io] En nombre de Dennis Tillman W7PF
Enviado el: martes, 12 de marzo de 2019 21:30
Para: TekScopes@groups.io
Asunto: Re: [TekScopes] DC508 HELP with PHOTOS option 7

Hi Miguel,
Because of your posts about Option 7 I decided to finish hooking up my DC508 Option 7 to my TR502 Tracking Generator. The one thing I am missing is the wiring diagram for the TM503 Main Frame.

The interconnect wiring diagram should be on a sheet of paper contained in the Field Modification Kit 040-0789-00. I have jumpers from a different Field Modification Kit so all I need to know is which DC508 rear interconnect contacts go to which TR502 rear interconnect contacts.

Can you send me a copy of the sheet with the wiring diagram interconnections from 040-0789-00.

Dennis Tillman W7PF

-----Original Message-----
From: Miguel Work
Sent: Wednesday, March 06, 2019 11:54 AM

Hi, I had bought a DC508 option 1 for my TR502 7L14. I need to install
option7, TM503 is option7, manual is very clear, but It will be very
useful a detailed photos from cables and connector. Has some body one
and can post some photos?
Thanks
Regards

Miguel



--
Dennis Tillman W7PF
TekScopes Moderator


 

Hi Miguel,
Thank you for the Interconnect book.
I also looked at page 19-5 TR502 Tracking Generator. This appeared to be duplicate information for what is on page 17-3.

Dennis Tillman W7PF

-----Original Message-----
From: TekScopes@groups.io [mailto:TekScopes@groups.io] On Behalf Of Miguel
Work
Sent: Tuesday, March 12, 2019 1:55 PM
To: TekScopes@groups.io
Subject: Re: [TekScopes] DC508 HELP with PHOTOS option 7

Hi Dennis,

Se page 17-3

http://dadaelectronics.com.au/doc/Audio/Tektronix/TM500/TM5X_RIB_FREE.pdf

You need to interconnect 14B, 15B, 16B, 17B, 18B and 18A

Best regards

Miguel


-----Mensaje original-----
De: TekScopes@groups.io [mailto:TekScopes@groups.io] En nombre de Dennis
Tillman W7PF Enviado el: martes, 12 de marzo de 2019 21:30
Para: TekScopes@groups.io
Asunto: Re: [TekScopes] DC508 HELP with PHOTOS option 7

Hi Miguel,
Because of your posts about Option 7 I decided to finish hooking up my DC508
Option 7 to my TR502 Tracking Generator. The one thing I am missing is the
wiring diagram for the TM503 Main Frame.

The interconnect wiring diagram should be on a sheet of paper contained in
the Field Modification Kit 040-0789-00. I have jumpers from a different Field
Modification Kit so all I need to know is which DC508 rear interconnect
contacts go to which TR502 rear interconnect contacts.

Can you send me a copy of the sheet with the wiring diagram interconnections
from 040-0789-00.

Dennis Tillman W7PF

-----Original Message-----
From: Miguel Work
Sent: Wednesday, March 06, 2019 11:54 AM

Hi, I had bought a DC508 option 1 for my TR502 7L14. I need to install
option7, TM503 is option7, manual is very clear, but It will be very
useful a detailed photos from cables and connector. Has some body one
and can post some photos?
Thanks
Regards

Miguel



--
Dennis Tillman W7PF
TekScopes Moderator







--
Dennis Tillman W7PF
TekScopes Moderator