Topics

FS: miscellaneous Tektronix manuals


Brad Thompson
 

Hello--

I'm offering FS the following original Tektronix manuals-- all are in very good condition
except as noted. Please note that some of these manuals are available for downloading at no cost. However, some users prefer printed copies. Postage is extra (except as indicated).

Scope-mobile 200-1 062-0870-00, May 1969 (R), 8 pp. double-sided. $3.00 postpaid via USPS first-class mail.
******
4957 Series Graphics Tablet Instruction Manual, 070-4784-01, Product
Group 15, Nov.1986 (revised); approx. 72 pp., in 9-inch by 7-inch three-ring
binder. $7.50 plus postage.
******
TDS 200-series Programmer Manual, 071-0493-01, approx. 220 pp., wire-bound,
in as-new condition. Asking $10.00 plus postage

Note1 : "This document supports TDS 210 and TDS 220 with FV:v1.09 and above when used with TDS2CM version CMV:v1.04 and above, or TDS2MM any version, and TDS224 when used with any version of TDS2CM or TDS2MM."

Note 2: Requires an optional RS-232 or GPIB interface (TDS2CM Communications
Extension Module or TDS2MM Measurement Extension Module).
******
11401 and 11402 Programmers Quick Reference, 070-6255-00, Product Group 47,
1988 first printing. approx. 80 pp., wire comb-bound (9-inch by 4-inch format), In very-good-minus condition (front cover creased). Asking $7.50 plus postage.
******
DSA 601A and DSA 602A Digitizing Signal Analyzers Quick Reference, 070-8183-00,
Product Group 47, 1991 first printing. approx. 60 pp., wire comb-bound (9-inch by 4-inch format), In good-plus condition (front cover creased, wire comb slightly distorted).
Asking $7.50 plus postage.
******
P6231 10X Active Probe, DC to 1.5 GHz, Instruction Manual, 070-6027-00 Product
Group 60, revised 1987, (8 1/2 inch by 5 1/2 inch plastic comb binding) approx 40 pp.
In very good condition (front cover slightly faded) Asking $7.50 plus postage.
**********************************

Question welcomed, PayPal honored.

thanks, and 73--

Brad AA1IP


Dan Cordova <danny_cordov@...>
 

Hi Brad,
Do you have or know anyone selling an adapter/fixture to match tubes on a Tektronix 575?
Or, do you know if there is a schematic I can buy? 
Glydeck has a blog about this, but there is no schematic or info to contact him.
Thanks,
Dan

On Tuesday, December 4, 2018, 1:31:54 PM PST, Brad Thompson <brad.thompson@valley.net> wrote:

Hello--

I'm offering FS the following original Tektronix manuals-- all are in
very good condition
except as noted. Please note that some of these manuals are available
for downloading at no cost. However, some users prefer printed copies.
Postage is extra (except as indicated).

Scope-mobile 200-1 062-0870-00, May 1969 (R), 8 pp. double-sided. $3.00
postpaid via USPS first-class mail.
******
4957 Series Graphics Tablet Instruction Manual, 070-4784-01, Product
Group 15, Nov.1986 (revised); approx. 72 pp., in 9-inch by 7-inch three-ring
binder. $7.50 plus postage.
******
TDS 200-series Programmer Manual, 071-0493-01, approx. 220 pp., wire-bound,
in as-new condition. Asking $10.00 plus postage

Note1 : "This document supports TDS 210 and TDS 220 with FV:v1.09 and
above when used with TDS2CM version CMV:v1.04 and above, or TDS2MM any
version, and TDS224 when used with any version of TDS2CM or TDS2MM."

Note 2: Requires an optional RS-232 or GPIB interface (TDS2CM Communications
Extension Module or TDS2MM Measurement Extension Module).
******
11401 and 11402 Programmers Quick Reference, 070-6255-00, Product Group 47,
1988 first printing. approx. 80 pp., wire comb-bound (9-inch by 4-inch
format),  In very-good-minus condition (front cover creased). Asking
$7.50  plus postage.
******
DSA 601A and DSA 602A Digitizing Signal Analyzers Quick Reference,
070-8183-00,
Product Group 47, 1991 first printing. approx. 60 pp., wire comb-bound
(9-inch by 4-inch format),  In good-plus condition (front cover creased,
wire comb  slightly distorted).
Asking $7.50  plus postage.
******
P6231 10X Active Probe, DC to 1.5 GHz, Instruction Manual, 070-6027-00
Product
Group 60, revised 1987, (8 1/2 inch by 5 1/2 inch plastic comb binding)
approx 40 pp.
In very good condition (front cover slightly faded)  Asking $7.50 plus
postage.
**********************************

Question welcomed, PayPal honored.

thanks, and 73--

Brad  AA1IP


 

Hi Dan,
I can help you test tubes on your 575.

Like you I was very impressed with George Lydeck's (Glydeck) creativity and when a 575 fell into my lap for $20 it acted as a catalyst for me to build an adapter to test tubes. I went one step further than George: I came up with a way to test any tube on a 575, 576, 577, 7CT1N or 5CT1N.

You can read about how you can do it in my paper which you can download at
http://www.ke5fx.com/A_VTCT_Adapter_for_All_Tektronix_SCTs_W7PF.pdf

If you want to get one of my adapter boards please contact me off list at dennis at ridesoft dot com.

Dennis Tillman W7PF

-----Original Message-----
From: Dan Cordova via Groups.Io
Sent: Tuesday, December 04, 2018 1:52 PM
Subject: Re: [TekScopes] FS: miscellaneous Tektronix manuals

Hi Brad,
Do you have or know anyone selling an adapter/fixture to match tubes on
a Tektronix 575?
Or, do you know if there is a schematic I can buy? Glydeck has a blog
about this, but there is no schematic or info to contact him.
Thanks,
Dan



--
Dennis Tillman W7PF
TekScopes Moderator


Glydeck
 

Dan,

Dennis’ curve tracer is the more complete solution, but if you’re interested in the one on my blog its in the file section of TekScopes.

https://groups.io/g/TekScopes/files/Tek575TestFixtures.pdf

George

On Dec 4, 2018, at 11:01 PM, Dennis Tillman W7PF <dennis@ridesoft.com> wrote:

Hi Dan,
I can help you test tubes on your 575.

Like you I was very impressed with George Lydeck's (Glydeck) creativity and when a 575 fell into my lap for $20 it acted as a catalyst for me to build an adapter to test tubes. I went one step further than George: I came up with a way to test any tube on a 575, 576, 577, 7CT1N or 5CT1N.

You can read about how you can do it in my paper which you can download at
http://www.ke5fx.com/A_VTCT_Adapter_for_All_Tektronix_SCTs_W7PF.pdf

If you want to get one of my adapter boards please contact me off list at dennis at ridesoft dot com.

Dennis Tillman W7PF

-----Original Message-----
From: Dan Cordova via Groups.Io
Sent: Tuesday, December 04, 2018 1:52 PM
Subject: Re: [TekScopes] FS: miscellaneous Tektronix manuals

Hi Brad,
Do you have or know anyone selling an adapter/fixture to match tubes on
a Tektronix 575?
Or, do you know if there is a schematic I can buy? Glydeck has a blog
about this, but there is no schematic or info to contact him.
Thanks,
Dan



--
Dennis Tillman W7PF
TekScopes Moderator



Dan Cordova <danny_cordov@...>
 

George,
These are really outstanding! 
Thank you very much,
Dan

On Wednesday, December 5, 2018, 6:46:28 AM PST, Glydeck via Groups.Io <glydeck=aol.com@groups.io> wrote:

Dan,

Dennis’ curve tracer is the more complete solution, but if you’re interested in the one on my blog its in the file section of TekScopes.

https://groups.io/g/TekScopes/files/Tek575TestFixtures.pdf

George
On Dec 4, 2018, at 11:01 PM, Dennis Tillman W7PF <dennis@ridesoft.com> wrote:

Hi Dan,
I can help you test tubes on your 575.

Like you I was very impressed with George Lydeck's (Glydeck) creativity and when a 575 fell into my lap for $20 it acted as a catalyst for me to build an adapter to test tubes. I went one step further than George: I came up with a way to test any tube on a 575, 576, 577, 7CT1N or 5CT1N.

You can read  about how you can do it in my paper which you can download at
http://www.ke5fx.com/A_VTCT_Adapter_for_All_Tektronix_SCTs_W7PF.pdf

If you want to get one of my adapter boards please contact me off list at dennis at ridesoft dot com.

Dennis Tillman W7PF

-----Original Message-----
From: Dan Cordova via Groups.Io
Sent: Tuesday, December 04, 2018 1:52 PM
Subject: Re: [TekScopes] FS: miscellaneous Tektronix manuals

Hi Brad,
Do you have or know anyone selling an adapter/fixture to match tubes on
a Tektronix 575?
Or, do you know if there is a schematic I can buy? Glydeck has a blog
about this, but there is no schematic or info to contact him.
Thanks,
Dan



--
Dennis Tillman W7PF
TekScopes Moderator