Topics

2215 trace problem


wjordan <wjordan@...>
 

I have a tek 2215 on which both traces will not go lower than about 1/3 rd
from the top of the screen.

any help is appreciated

WDJ


Peter Florance
 

I don't know if this will translate to your situation, but my eBay 465 did
the same thing (first vert then horiz and then I had to fix it) and I found
overheated and open resistors in both vert and horiz amps. There were no
other bad parts. Easy fix if that's your problem.
You may notice the board dis-colored under the parts in question.
Peter Florance
audserv@exis.net

-----Original Message-----
From: wjordan [SMTP:wjordan@bcpl.net]
Sent: Saturday, August 11, 2001 10:05 AM
To: TekScopes
Subject: [TekScopes] 2215 trace problem

I have a tek 2215 on which both traces will not go lower than about 1/3 rd
from the top of the screen.

any help is appreciated

WDJ


To unsubscribe from this group, send an email to:
TekScopes-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/