Mr. RigdonI am so sorry to hear of the tribulations you have endured in trying to buy these books.Dennis took on this task (beyond the resposibility he already had as moderator) out of his respect and

Wow.I thought I had wandered into a Monty Python sketch. George Sent from my T-Mobile 4G LTE Device

Great discussion on benches. One thing I have learned from working on instruments (and stuff like carburetors, steering pumps and such) is to use large size fiberglass trays, like lunch trays, but 18"

Well this may or may not be related. I have a 2445B. Turned it on the other day and saw a much shrunken display. Less than half normal size. All channels, all settings. I could hear that the fan wasn'

Exactly.I tried everything out there before I found that any penetrating oil such as WD-40 or even better, PB Blaster, works to dissolve the glue and turn it into a gel that can be wiped away. There i

Perhaps Mr. Massengale can be persuaded to post a schematic of his test/load unit. I suspect there is wide interest in that and I would be willing to pay for his investment in time to create that desi

Here it is again. That old horse about the $600 aircraft toilet seat. Let me explain that to everyone who jumped on that without thinking it through. When DoD issued the specs, they had very specific

Fellow members,I searched the forum log and saw no listing for this subject. I have found a really nice 2445B -- S/N B063568, meaning late production. Unfortunately, this is the series with the SRAM "

Years ago, I attended an auction at the Myrtle Beach Air Force Base when they were closing it down. A 50KVA UPS system came up and I was the only bidder. It was a $4500 unit and I got it for $50. I do

Not really sure what's going on with this, but I am also a member of the HP/Agilent Yahoo group and messages appear as quite normal e-mail type entries.George

Thanks.

Gentlemen,When I say "bent", I mean the whole damn thing. Ground shell, center contact -- everything. Too far gone to bend it back and get a proper fit. My issue is how to get at it under all that shi

Siggi, My real issue is how to get at the connector. The shielding covers all access to the item and it looks like there is no way to get that shielding off except to remove the whole board and hope t

I have a very nice 2445B but the bnc connector for ch.1 is bent and I am getting tired of looking at it. I had some free time and wanted to change it out but WOW. I don't know where to start. Between