Yes

Hi Ron, I wonder if we may know each other. I knew a Ron who would be about your age who ran an engineering organization in Cedar Rapids. At the time, I was a brash young engineering group manager in

Here's the link to post from Sergey Kubushyn<https://groups.yahoo.com/neo/groups/TekScopes/conversations/messages/93463>: https://groups.yahoo.com/neo/groups/TekScopes/conversations/messages/93463 It'

Hi Craig, You can easily build one in just a few hours. The only challenge is obtaining the right tunnel diode (eBay), mounting it (use conductive epoxy), and confirming the rise time is within spec (

Hi all, I've been working on some additional replacement feet (besides the 100, 300, and 400 series feet I've mentioned in previous emails) and now have finished product available, which are listed be

You're welcome! I learned about this part the hard way, too... ________________________________ Sent: Wednesday, May 16, 2018 2:03 PM To: TekScopes@groups.io Subject: Re: [TekScopes] Power switch brac

Hi Keith, That part slides along the top of the main board (if you have the scope on its side to access the power switch). it holds the hex nut that attaches to the screw that you can see in the botto

Hi all, I've been collaborating with Ben O'Brien on replicating the rear cordwrap feet used on the Sony/Tektronix 305 battery powered scope. As far as I can tell, this is the only scope that uses thes

Hi all, I've been working back and forth with Brian Bloom to develop replacement rear guard feet for 100 series signal generators (106, 114, 115, 184, 191, etc.). These feet don't devolve in the same

Brian, Would you like me to take a shot at modelling / printing these? Jeff P.S. I see that the post office has delivered the 100 series rear feet prototypes. Anxious to hear your thoughts on them. __

Lee, thanks so much for your help, repeated trial fits, and great photos that clearly showed what needed to be changed. I'm glad the final product worked out for you. I'm looking forward to working wi

Thanks, Phil. I'm glad they worked out for you! And thanks very much for the inspiration to start the project. Jeff ________________________________ Sent: Friday, March 30, 2018 12:00 PM To: TekScopes

I uploaded the photos taken from having the feet installed on Bert's 314 to the photo gallery this morning. The album name is "Tektronix 314 and 335 Replacement Feet" Jeff ____________________________

Good thought. If Bert doesn't do that, I will when I get the photos. ________________________________ Sent: Thursday, March 29, 2018 1:31 PM To: TekScopes@groups.io Subject: Re: [TekScopes] Back feet

Hi Bert, I think you want to send the photos to me, not Lee (Lee was test fitting the feet on his 335). I was the one who sent you the samples. You can send the photos to me at n0dyjeff@... or

Hi all, After several more rounds of trial fittings, we have finished the 335 scope replacement feet project. Many thanks to Lee Houde for great photos and feedback. The feet are available on my websi

Hi Bert, That would be great. Even though the foot has the same part number on the 314, it would be good to confirm correct fit on that unit. Let's wait until I get results from Lee - I actually sent

Hello all, Here's an update on the project to develop replacement back feet for the Tek 335 scope. Lee Houde has graciously provided me with a sample foot, which I've measured and modeled. I sent a fi

Hi Lee, Thanks! I'll get to work on it as soon as the foot arrives! My address: Jeff Davis 12 Galora Lane Ladera Ranch, CA 92694 319-431-3846 (cell) Regards, Jeff ________________________________ Sent

Hi Phil, Yep, that's me. And I did get your email and have sent a response. What I do is entirely non-destructive. I just need to take measurements from the existing foot Jeff ________________________