Hi Walter and Reed, When I was having trouble with the high voltage on my 577 CRT and I had no luck locating a replacement HV Transformer you suggested hooking an X/Y Monitor up to the horizontal and

I have been working on my 7834. Previously, the power supply goes into tick mode for a few time before the scope shows a trace. A few weeks ago, the scope give up start up and end up in a endless

" I just ordered an EDS-88A II designed by Dave Miga from Merced Electronics. I'll see if it can successfully test the wad of caps that the BSIDE ESR02 Pro (aka Arduino LCR/transistor tester) and the

There is. I just went to my groups.io user profile page following Siggi's link, and although the option isn't obvious (you have to click on an 'Advanced Preferences' button that looks like a heading

How about allowing attachments with these limitations: 1. Users should be able to disable whether or not they receive them. 2. Place a limitation on size - a 1.5GB attachment is ridiculous, there

If you're referring to email delivery of attachments here, then this - as many have mentioned - is avoidable. Please go take a look at your subscription settings

It's coming back to me gradually - this stuff was discussed here a while back, maybe 2-4 years. I think the 577 non-storage CRT can work in the 576, but I wouldn't want to waste 577s for that purpose.

A couple of things: Some news clients will leave attachments on the server until told to download them. I am not sure if Thunderbird will do this but have used others that do.    Secondly, there may

I looked into this issue a few years ago, and as I recall, it may be possible to sub certain CRTs functionally, but with a different graticule, like the standard scope 10x8 div markings, instead of

I now have noticed that conversation on the ESR subject and related issues regarding the high number of replies has now results in sort of a “Hydra’ of multiple posts with different subject

I agree with Dave on attachments -- not JUST for the cost to deliver (some folks are still on metered feeds), but also for: 1) the time to download files. I have a fast web connection (at least

I am strongly for allowing attachments. I administer one groups.io account and one google groups account. Both permit attachments - and it has been a great asset to both. (Individuals can always

Great idea. If I could see a picture of the knob or part that a member is seeking, I could check my stock pile etc...

Reed, for your reference, the CRT (P2) is 154-0563-00 for early numbers, and (P31) 154-0563-05 for s/n over B060000. sadly, I do not have this tube. The Tek CRT Tubes index does not show either tube

Yes, don't be stupid and just set your Groups.io account to NOT RECEIVE ATTACHMENTS if you don't want them.     Mark Jordan

True, I did. I wanted to be sure you knew how ESR meters work, and was hoping you could figure out for yourself that you can't make them work for all circumstances. For instance, nothing you do

I DO NOT WANT TO DEAL WITH A BUNCH OF ATTACHMENTS FOR WHICH I HAVE NO USE AND FOR WHICH I HAVE TO PAY DATA FEES TO MY ISP. If one wants to provide photos, put them in the photos section of the group.

Regarding the concerns expressed about allowing attachments I suggest taking a look at how it is working out for other groups that presently allow attachments. One such group is

I wholeheartedly agree that allowing attachments would greatly enhance the ability of users to clarify questions and provide responses. The old saying that a picture is worth a thousand words comes to

After an hour of failed searches I posted a *very* specific question pertaining to identifying a *particular* model of ESR tester which I wanted to buy. Shortly after I posted the query, I realized