Thank you to whomever posted the link to the Jim Williams history story! The two Analogue Circuit Design EDN series books Jim put out are wonderful, so see if you can get your hands on a copy of them

Thank you. Bernd Schroder

Found it.... P6042. See page 357 of the 1969 catalog. Dave Casey [TekScopes] wrote:

It's a Tektronix current probe and amplifier, a less capable predecessor of the AM503/A6302. I'll dig around in the catalogs to see if I can find it... Dave Casey [TekScopes] wrote:

http://www.edn.com/design/analog/4442194/Remembering-Jim-Williams--5-years-later?_mc=NL_EDN_EDT_EDN_funfriday_20160610&cid=NL_EDN_EDT_EDN_funfriday_20160610&elqTrackId=e9eb87b1980d4f96a39f257dbbd918d6

Today I was given an SG504. It came without the head and since I already have two working SG504's I won't bother fixing this one. It works fine with a working head so if anyone is interested in

Greetings, Bill wins the little 2245A booklet. Thanks. Ken [Non-text portions of this message have been removed]

Greetings, I’m getting ready to put some Tektronix manuals on eBay. While getting the information together I came across a very small user’s guide (8 pages 3.5 X 5.5) for the 2245A. If someone

Kim I think you and I talked privately about this a few weeks ago ...I see plenty of signals on my 496 with an external antenna I would personally start with these folks if I needed a repair

For Repair / Calibration contact Bob Koller Four Designs Repair http://www.fourdesigns.com/ . http://www.fourdesigns.com/ Four Designs Repair http://www.fourdesigns.com/ electronic test and

Good Morning all! Is there anyone here on the list that does repairs or calibration on Tek 49X series SA's?? I've got one and I'm thinking that it needs the attenuator serviced or replaced. The

Bob, I have never worked out how to do PMs from Yahoo neo. Can you e-mail me using rogergevans on Google mail (gmail.com)? Many thanks, Roger

They're the same inside, but the keyboard assembly was revised to offer a 'native' rack-mount solution. You can use the 494P or 494AP manuals (along with the change notes in the back) as a reasonable

Looking at the 7000 plug ins etc, first off the 2465 handle for Roger. Please pm me an address for postage quote.

Hello-- I'm offering FS a pair of new-old-stock (NOS) cables made by L-Com in original packaging. These feature overmolded connector housings and robust cable (think: wrestling small python

I believe the only difference beside the nomenclature is that the A's have S/N. Here's part of the the MSR from July 10, 81 //Two current probes are now designated base items and have full product

I always thought it was the same probe, with a different name.

I think it is possible I have a P6302 rather than a A6302. How can you tell? jerry

Dave Yes this is the right place to ask about help with a 27xx Spectrum analyzer. Even though the group is called Tek SCOPES any piece of Tektronix test equipment is fair game not just

There is a lot less information available about them than the 49x series,which they share a lot of parts with.  Dave at Artek Media can tell you if the service information is available. Jim To: