All I have is a 307-1014-01. Not sure that it would be the same. Harvey

Hi Don, What scope? And what is the part number of the 100X Attenuator? Dennis Tillman W7PF

Donald, Is the attenuator missing or is it defective? If defective, you might be able to fix it by opening it up and resoldering the pin-to-ceramic connections. They often develop some sort of

Sam: In case you have not seen this before, there is a spray-on paint called Krylon Bahama Sea and it is excellent for full coverage painting of Tektronix panels. It is not good for touch-up because

Hi Dave. , Usually easy to find the Logo on Google Search. Otherwise take close-up photo of Logo and post here. I have 4 books of electronic OEM Logos that can be easier to use then Google and

Sphere may have a replacement. Thanks, Barry - N4BUQ

Hello everyone! New guy in town here ;) I just purchased an used 547 that I want to fully restore. It was in working condition when I bought it but the traces and the trigger systems didn`t work

I`ve just been restoring a Tek 475, only to find after clearing all the faults that the little 100x attenuator module [part # 307-1014-10] is missing. Can anyone advise me where I might obtain this

Every time I go to the Groups.io page (yes, every time), it says my account is bouncing. I "un-bounce" it, but later when I go back, it says I am bouncing again. This is to check if I am receiving

Hi, the HV multiplier in my Tek 475 is defective. I will replace it with a multiplier HRT507. This is done several times as I have read in several forums. My question is how to connect the HV-lead

Hi everyone, new guy in town here.... I just purchased an old tek 547 that I started restoring and I just had the first BIG problem I guess.... When I purchased it it did work to some extent, it did

Does anybody have a parts mule thet can scavenge so I can complete this `scope [or advise where I can get this 100x attenuator module]

Does anyone have the CMYK or RGB Codes or other data so one can have this paint mixed locally? Sam W3OHM

Thanks. I had checked there. It has some pictures, but no description. Let me know if anyone needs/wants one. Like I said, I saw four here locally. -- 73 Joe Laffey

How about using a 'Street Ell'? https://www.lowes.com/pd/Mueller-Proline-3-4-in-dia-90-Degree-Galvanized-Street-Elbow-Fittings/3425074

"Joe Laffey" <joe@...> wrote: Here's a bit of information and pictures on what they are: http://w140.com/tekwiki/wiki/Metrotek_MG701 Lyle -- Lyle Bickley AF6WS

Anyone know anything about the Metrotek MG701 tm500 plugin? Anyone interested in one? I saw four at a local store. -- 73 Joe Laffey

I don't know about three weeks; the first couple of times I purchased from Qservice, the parts seemed to show up pretty quickly. I didn't realize at the time that Qservice was in Greece. When I found

I'm not as sharp as I used to be in understanding things, but would something like this do the job.  It's available in 1/4" fitting.https://www.mcmaster.com/#hose-connectors/=1b3mhg3 To:

One of the neat tricks a drywall guy taught me was to cut a piece of drywall a couple inches larger than your hole on all sides. Then score the back so the center piece will fit the hole. Crack the