I agree Steve, We need to go to a google group. A retirement group to which I have belonged for 10 years has moved to Google. That solved the problems. Yahoo is falling apart and we should not have

While I have really enjoyed contributing and reading from the groujp over the past few years, I simply don’t have the time to put up witih the inefficiencies of the NEO screw-ups and will be leaving

After some more checks I suspect the -50V line. There is only -0.6V on the -50V supply and the current is -190mA. At the moment I am searching for capacitors in on this supply. ---In TekScopes@...,

In the mean time I hooked-up the current probe and TDS3032B oscillscope to all supply channels and measured the current during start-up and when it is clamping. A36= ~0mA B35=~0mA A19=+20mA

THANKS! 73, Garey - K4OAH Glen Allen, VA Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line and TR-4/C Service Supplement CDs <www.k4oah.com> mst3krules@... wrote:

Also keep in mind that Tektronix was not always consistent in how they referred to their high voltage multipliers. The same 152-0493-00 multiplier is marked x14 in the 7844 schematic, x7 in the 7904

Excellent. Thank you. I probably have the same data in my old ECG book but I have no idea where I stored it.

Got the scanner working. Th file is in the Files section as ECG High Voltage Triplers. ---In TekScopes@..., <tekscopes@...> wrote: I'm interested! 73, Garey - K4OAH Glen Allen, VA Drake 2-B,

I just found out my scanner isn't working correctly. I will post it as soon as I can get it scanned. ---In TekScopes@..., <tekscopes@...> wrote: I'm interested! 73, Garey - K4OAH Glen Allen,

<<So I use that one for 'rough' work for now. Hope to get a 160Mhz Rigol Arb Function gen to use to cal, along with a jim williams pulse gen.>> ---In tekscopes@..., <mosaicmerc@...> wrote: Change

Tom Jobe wrote: Here are the current stocking distributors, or you may be able to buy it direct from NTE: http://dilp.netcomponents.com/cgi-bin/nteinc.asp?partnumber1=NTE538

Nice description. I would point out that it doesn't matter what the DC bias is on the input square wave provided it doesn't exceed C1 voltage rating. C1 blocks any DC and it's only the

Reed Dickinson wrote: I have a 20+ year old ECG cross reference book somewhere. If I can find it, I will get the data. It seems to me that the 520 was for a B&W or 13" color TV, but I haven't replaced

With all the current interest in voltage multipliers, including theory and construction, I feel it is about time to talk technically about them. I am inserting a schematic of a voltage

Hi Reed, Thank you for documenting the ECG538/NTE538 multiplieradaptation for the 4xx scopes such as the 465 and 475families! Who would you suggest as a source for thismultiplier? I would like to buy

Hi all, Anyone know where I can get a Lemo male insert part number 802? It isa size 2B with one coax and two signal pins. This is to make up a BNCcable for the CG5011 calibrator. I can find all the

I'm interested! 73, Garey - K4OAH Glen Allen, VA Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line and TR-4/C Service Supplement CDs <www.k4oah.com> mst3krules@... wrote:

 I don't know about anyone else, but I'm interested in your ECGmultiplier information! tom jobe...

I found some data on the ECG high voltage triplers if you are still interested. ---In TekScopes@..., <tekscopes@...> wrote: Well, well, perhaps I've got it. Not finding any documentation on the

i've done HV splices, first with a little bit of corona dope and then using plumbing Teflon tape, create an insulating layer. This