Hi Dean,may i request a copy of this as well please regards...Pete

*shrug* I have simply used little L allen wrenches and haven't had a problem except for someone's already wrecked the screw. Peter ROLYNN PRECHTL K7DFW wrote:

*shrug* I have simply used little L allen wrenches and haven't had a problem except for someone's already wrecked the screw. Peter ROLYNN PRECHTL K7DFW wrote:

You made no mention of the +/- 25V supplies. Haveyou checked these? Dave Casey Sent from my PC

Dear All, The positive side of the DC offset of my FG-504 is not working, but negative is working fine. I thought this would be an easy fix, but I am about to quit. In case someone gets interested, I

chance of loosening tight screws. =========================== The advantage of the short hex key is recognized. What I don't understand is the reasoning behind spending $30, or more, on a Xcelite

Sorry, my 4.01 floppies are unbootable from age(probably) or heat or bad handling, but here are a couple of things you mighttry: http://www.vetusware.com/ http://www.freedos.org/ Dick

Hello Dean, let me thank you in anticipation for all your care when working on this adapter and for putting all the material together. Please can you add me to the email-list: magnustoelle AT

Good tools are always worth some spending, given the time it takes to remove only a single ruined screw. European and US quality tool brands are quite different, but snap-on is another international

These two are probably the "most often lost", and "most often broken" knobs on 7000 series plug-ins respectively, and my small stash is now exhausted. I only have a couple of the latter left and am

Hi Steve, You got it http://vetusware.com/download/MS%20DOS%204.01/?id=180 Good luck, Lang

I have version 5 archived on my HD as three 720Kdisks. I can Zip them into one file and email it as an attachment. Let me know. Regards. Jerry W2JI

Thank you very much! ...Section 6 of the Service Manual :-) Thanks to David and Tom (by e-mail) I disassembled the CTM and power-supply shield circuit and now I have access to the focus circuit. Do

Hello Dean. Could you please add me to that list? Best regards Thomas in Norway. 2010/8/28 Dean <deanhuster@...> -- Please avoid sending me Word or PowerPoint attachments. See

I have 13 e-mails so far requesting the construction note and other documentation for the power module tester. I need to scan the material and will convert it all to one .pdf file and send it out via

Hi Steve, I thought there was a language command you could put in either the autoexec.bat or the config.sys file. Maybe all you need to do is look for the language command in one of those files and

I doubt "green" has anything to do with it. Ideally you should have both long and short as they have different uses. The long is good for getting into deep places like you mentioned, but the short is

Apologies for the OT! I'm trying to use an old PC as a test bed for a logic analyser. It has a french version of MS-DOS 4.01 which I would like to change. It will not boot from my 6.22 version so

Thankyou Victor for your input i am in the process of doing just that Thanks also for the advice re the ripple on the lvps units i will also check same Barry

I just ordered a set from amazon for $28 with shipping. ===================== Why that's one of them thar new fangled compact versions marketed under Xcelite PS-89 or PS-89V. Maybe it's supposed to