Greetings, FWIW I just tried tekwiki.org <http://tekwiki.org/> and it works properly for me. Mac OS Safari 12.1.2 visited at: 08:14 MST 20-JAN-2022. Regards, Ken

Here's the photos and a couple gerbers of a reproduction board I whipped up, copied almost exactly from the board in my TM5006. There is a PCB and a rear plate. Just order the rear plate as usual for

I agree 100%, a TM502A without the cover IS the perfect fix for doing TM500 module repairs, it's what I use when I have to do any serious module work. I also have extenders for quick adjustments, so

I tried to buy a Tek 603 over Ebay but it unfortunately was broken during transport. Not much visible damages to the parcel though but nevertheless the neck was broken off. Anyone has a spare tube

I made a mistake, for the TM5006, that should be part 112-024-213R001, the "female" version of the connector. As for the screws, "jack screws" will probably do. And in a hobby/bench environment, it's

Does that include only official Tek softwares ? If not these might be of interest: http://www.hakanh.com/dl/TDSErrLog.htm http://www.hakanh.com/dl/TDS_pv.htm /Håkan

TM502, TM501... you can even use a TM503!! A bit more bulky, of course, but no need to cut down anything. I often use the rails to stabilize my hands when probing components. cheers Martin

Perhaps suggested already: 3M 3341-3. I used these "jack screws" (called so by Farnell) in my P7001 GPIB project. Albert

I have three TM5006 mainframes here, I haven't checked if they have the GPIB boards, and I unfortunately can't offer any boards for sale, but I can take some high resolution photos to upload to the

Bonjour, All SSL certs expire periodically. These is a bug in the timing of many browser that do not account for the expiration and renewal in every time zone. At 08.30 GMT Tekwiki.org works

Upon checking my 2445 it has 155-0241-02 and my 2465 155-0241-01. Deal killer?

Ok, Thanks to Bruce, I now have all the Field Adjustment software I'll ever need. :) I'll add them to TekWiki soon. If anyone has any other software that was available for these scopes (like

I have just recollected that this can mean the CMOS coin-cell needs replacing. Tim gmail.com@groups.io> wrote:

The following files have been uploaded to the Files area of the TekScopes@groups.io group. /TEK TDS ALL.RAR By: Bruce Lane <kyrrin@...> Description: Field adjustment/Cal

Bruce, I have a very similar problem; I get a message saying my clock is ahead. (I am on Greenwich (UK) Mean Time) Walter's site does the same. Tim

It works for me. Perhaps the problem has resolved itself already. If you still have trouble, check your system clock. If it drifts too far from true internet time, you can get a security cert

You could also upload it to the files section here. Regards, Jared

Well... I couldn't get to tekwiki.org for some reason (something about a security certificate). However, I have uploaded the TDS field adjustment software collection I have to KO4BB's site. I don't

I'll follow an earlier suggestion, and upload it to TekWiki. ;-) -- Bruce Lane, ARS KC7GR kyrrin@... "Quando Omni Flunkus Moritati" (Red Green)

Thanks! But it tells me that the daily download limit has been reached. Is there another way I can get the files from you? Thanks, Jared