|
Re: USPS shipments comments
I’ve been to quite a few warehouses to pick up stuff I had delivered by
freight. It’s a lot cheaper to pick it up compared with home delivery since
they need to dispatch a truck with a lift gate
I’ve been to quite a few warehouses to pick up stuff I had delivered by
freight. It’s a lot cheaper to pick it up compared with home delivery since
they need to dispatch a truck with a lift gate
|
By
stevenhorii
·
#187330
·
|
|
Re: TEK 475: Dead on Start Up.
Dear Tom, Michael and Mark,
Thank you very much for your extensive answers.
I will attempt to diagnose / repair the TEK475 in the next few weeks and will surely report back on the
Dear Tom, Michael and Mark,
Thank you very much for your extensive answers.
I will attempt to diagnose / repair the TEK475 in the next few weeks and will surely report back on the
|
By
Redguuz
·
#187329
·
|
|
Idle Question About the 485
I'm trying to convince myself not to bid on this 485 (https://www.ebay.com/itm/393631311648) which has no bids, mostly because I don't have the cash, but also because I already have a 2465 that I am
I'm trying to convince myself not to bid on this 485 (https://www.ebay.com/itm/393631311648) which has no bids, mostly because I don't have the cash, but also because I already have a 2465 that I am
|
By
Jeff Dutky
·
#187328
·
|
|
Re: USPS shipments comments
That sounds like a Drew Carey show episode where Oswald smashed the scanner
in shipping while playing on a forklift.
That sounds like a Drew Carey show episode where Oswald smashed the scanner
in shipping while playing on a forklift.
|
By
Michael A. Terrell
·
#187327
·
|
|
Re: USPS shipments comments
My last UPS delivery arrived as an empty, torn box with tire tracks on it.
The Ebay seller won't even reply to me, so I'm going to ask for a refund
from Ebay or Paypal.
A UPS delivery before that was
My last UPS delivery arrived as an empty, torn box with tire tracks on it.
The Ebay seller won't even reply to me, so I'm going to ask for a refund
from Ebay or Paypal.
A UPS delivery before that was
|
By
Michael A. Terrell
·
#187326
·
|
|
Re: USPS shipments comments
I reuse boxes all the time, and have a huge selection, because even though most of what I ship goes in the flat rate boxes, some items don't. I always either strip off old labels or black them out,
I reuse boxes all the time, and have a huge selection, because even though most of what I ship goes in the flat rate boxes, some items don't. I always either strip off old labels or black them out,
|
By
Dave Seiter
·
#187325
·
|
|
Re: Tek VAR Pot Repair Rings
I don't have any timeframe in mind, but the machine shop predicted a lead time of 5-6 weeks. They must be busy. I don't plan to place an order for these until I've got enough commitments to get me
I don't have any timeframe in mind, but the machine shop predicted a lead time of 5-6 weeks. They must be busy. I don't plan to place an order for these until I've got enough commitments to get me
|
By
Jim Adney
·
#187324
·
|
|
Re: Replacement caps for DC 505A
Blame it on me: I wasn't doing a proper job of searching Mouser. Not even sure what I did to get only two results. Using Mark Vincent's search as a start point I found the variety of Vishay axial
Blame it on me: I wasn't doing a proper job of searching Mouser. Not even sure what I did to get only two results. Using Mark Vincent's search as a start point I found the variety of Vishay axial
|
By
Dave Peterson
·
#187323
·
|
|
Re: Tek VAR Pot Repair Rings
Jim,
After I committed to only 10 rings, I did a more thorough survey of my letter and 1-series collection, and I would like to increase my order to 20 rings.
Almost every plug-in in my collection
Jim,
After I committed to only 10 rings, I did a more thorough survey of my letter and 1-series collection, and I would like to increase my order to 20 rings.
Almost every plug-in in my collection
|
By
Jeff Dutky
·
#187322
·
|
|
Re: Tek VAR Pot Repair Rings
For anyone needing more than just a repair ring, I have a handful of NOS
Tek Made pots in this style. Send your part number requests and I'll see
what I have.
Dave Casey
yahoo.com@groups.io>
For anyone needing more than just a repair ring, I have a handful of NOS
Tek Made pots in this style. Send your part number requests and I'll see
what I have.
Dave Casey
yahoo.com@groups.io>
|
By
Dave Casey
·
#187321
·
|
|
Re: Replacement caps for DC 505A
Dave,
How close are the mechanical tolerances? The highest values for each voltage range (e.g. 6800 uF @ 16 V) is only 21mm in diameter. Would that still fit in the space?
Otherwise, my (relatively
Dave,
How close are the mechanical tolerances? The highest values for each voltage range (e.g. 6800 uF @ 16 V) is only 21mm in diameter. Would that still fit in the space?
Otherwise, my (relatively
|
By
Jeff Dutky
·
#187320
·
|
|
Re: USPS shipments comments
I can see, sort of, if there's an old label with a bar code, or a bar code printed on the box. I remove those, or black them out, with a marker. I'm not so sure why it should matter... particularly
I can see, sort of, if there's an old label with a bar code, or a bar code printed on the box. I remove those, or black them out, with a marker. I'm not so sure why it should matter... particularly
|
By
Roy Thistle
·
#187319
·
|
|
Re: USPS shipments comments
Here in the colonies, we sometimes use Dead Ex... did I spell that wrong? (Highly talented in the arts of package contents destruction, they can fatally break stuff in any package just by accepting it
Here in the colonies, we sometimes use Dead Ex... did I spell that wrong? (Highly talented in the arts of package contents destruction, they can fatally break stuff in any package just by accepting it
|
By
Roy Thistle
·
#187318
·
|
|
Re: USPS shipments comments
I am Italian an electronic hobbyist.
In 20 years, with eBay sales, I have shipped more than 2500 packages around the world.
From what I have read on this topic I have understood that "the whole world
I am Italian an electronic hobbyist.
In 20 years, with eBay sales, I have shipped more than 2500 packages around the world.
From what I have read on this topic I have understood that "the whole world
|
By
maurit
·
#187317
·
|
|
Re: Replacement caps for DC 505A
Dave,
Take one lead and bend it so it goes in one hole. The other lead bend it so it is over or under, under if the bare wire does not touch other traces. Then use a solid wire as the extension to
Dave,
Take one lead and bend it so it goes in one hole. The other lead bend it so it is over or under, under if the bare wire does not touch other traces. Then use a solid wire as the extension to
|
By
Mark Vincent
·
#187316
·
|
|
Re: Replacement caps for DC 505A
That looks pretty good!
I've been studying Vishay's website, and the 500D series was looking promising, but couldn't find the right size available for sale. It's been kind of maddening how this
That looks pretty good!
I've been studying Vishay's website, and the 500D series was looking promising, but couldn't find the right size available for sale. It's been kind of maddening how this
|
By
Dave Peterson
·
#187315
·
|
|
Re: Replacement caps for DC 505A
Dave,
Will this Vishay work?
Dave,
Will this Vishay work?
|
By
Mark Vincent
·
#187314
·
|
|
Re: USPS shipments comments
No only did your friend, with the camera, get punched in the face but he got punched in the stomach and kicked in the groin as well. Not that I approve, but I can see why some people turn to the gun
No only did your friend, with the camera, get punched in the face but he got punched in the stomach and kicked in the groin as well. Not that I approve, but I can see why some people turn to the gun
|
By
Merchison Burke
·
#187313
·
|
|
Re: Tek VAR Pot Repair Rings
That is very interesting and timely for my collection. What's the timeframe for getting back to you with a commitment? I need to examine 20 plugins ...And do you need a deposit or 100% upfront?
That is very interesting and timely for my collection. What's the timeframe for getting back to you with a commitment? I need to examine 20 plugins ...And do you need a deposit or 100% upfront?
|
By
snapdiode <snapdiode@...>
·
#187312
·
|
|
Re: USPS shipments comments
I once picked up a Project Mercury horizon scanner from a surplus dealer in
Los Angeles. I was headed home and already had a lot of stuff that I was
taking back as baggage, so I decided to ship it. I
I once picked up a Project Mercury horizon scanner from a surplus dealer in
Los Angeles. I was headed home and already had a lot of stuff that I was
taking back as baggage, so I decided to ship it. I
|
By
stevenhorii
·
#187311
·
|