Glad you are ok Dennis. Your 1st post displayed a great sense of humor concerning all this - much respect. my 2 cent response to a great list: - It's completely off-topic # yes, but the humanity

Thanks for all of the options, gives me a lot more part numbers to search for. It turns out my CRT is marked T5032-25 on the glass and T5611-25 on a label so I guess it could use either one. Glass or

It can be helpful to mix long term complex projects with some short term things where you can point at an immediate (or close) success.  Sometimes you get tired of working on the same thing for month

The display is a standard magnetically deflected monitor. There are some tricks if you have some shaky hands, and that's to do what artists do, which is a palm or wrist rest while working. Harvey

John, IANAL but -- if you can sell those limited common elements without selling the real property, then those elements are separate from the real property and their value is zero for the purposes of

Great hearing from you again Dennis! Vince. -- Michigan VHF Corporation -- nobucks dot net K8ZW - http://www.hamradio.fun

Hi Gang, Please ignore my missent query about property tax. john

While I highly respect everyone's well-meant involvement and attempts to help, at the early stages of what might evolve into a long off-topic thread, I'll throw my 2 cents at it and recommend strongly

The fact that heat and vibration "cured" the CRT issues suggests a bad solder joint or connector contact, so that should be eminently repairable. You might even be able to fix it merely by careful

I would like to second Ananda's suggestion of "puttering" as a treatment, if not a cure, for depression. Just as it is helpful to have several tasks (in a hobby, or at work) that engage different

Richard Peterson <saaber1@...> added folder /P6430 Temperature Probe Instruction Manual The following files have been uploaded to the Files area of the TekScopes@groups.io

Thanks, I did not know such a thing existed. Linky? Chris KQ6UP

Dennis, Glad to hear you are OK. I was silently praying that we will hear from you at some point. Please do take care of yourself. Staying involved should also help you to a great extent. When I feel

Buy the LCD replacement soooo much easier. Regards, Stephen Hanselman Datagate Systems, LLC

Hi Federico, Any progress so far? It's true that the pots work in opposite directions. In my 2232 this is achieved by interchanging assignment of 0V and +5V to the terminals. With an ordinary dual

Hi Bob, If you really need a 561b CRT, then the TEk part number you would seem to need is 154-0614-00 That’s external graticule, Standard p31 phosphor and Standard B14-38 basing. Note that the

My understanding is that the frame calibration is to ensure the scope frames are identically calibrated which you would want if swapping plugins between frames.

The CRT went intermittent with brightness and vertical spread last week. I put it in my car hopping that a friend of mine would take a look at it. He did not want to bother, so it rode around in my

Yeah, a fall detector is definitely something you should buy if you're concerned. It doesn't cost so much and it's definitely comforting and helpful.

Thank you for the many inputs. I am looking for a way to calibrate this 5113 scope without dedicated calibrators. Otherwise it becomes too much for me, just for this one time action. I can use an