I’ve been using the RPR a lot lately. (Though not enough to remember it’s the Registry not the Record ☺ ) In the same area is a document of the test conditions for all the 157- checked and

Yeah, I found that. I remember placing some of the documents there myself some time ago. I think it's a bit difficult to find, hidden deep down from the main menu. Raymond

Joe, I have a scope that it would fit, that might need a replacement CRT (when I get it patched up enough to power it on). I'm located in Maryland; would it be possible to arrange receipt of this

LMGTFY… https://w140.com/tekwiki/wiki/Replaceable_Parts_Registry_(RPR) Sent: Wednesday, July 07, 2021 1:54 PM To: TekScopes@groups.io Subject: Re: [TekScopes] Tek 154-0235-00, where does it belong

Dave, thank you very much! Got to admit I had not found that info before. So it is clear now the crt won't fit to any of my scopes. Regards, Joe

Had to ask to find it 30 secs later..."Replaceable Parts Registry". Raymond

Where did you find that, Dave? Raymond

30 seconds of looking at the 154 Replaceable Parts Record, available for free download at w140.com . 154-0235-00 is for the 531A, 533, 533A, and 535A. (I believe it can also be used in the 531 and

Hello, I have been offered a crt Tek 154-0235-00, NOS boxed. Can anyone id to which scope it would fit? Thanks for replies! Regards, Joe

RSA3408A, actually manufactured in this century, is almost a contemporary instrument (compared to much of what is discussed in this group). Considering that spectrum analyzers seem to retain their

Rey, I had a Z problem that was one coax connector that needed to be moved up and down in its socket a few times. I had all other voltages correct, nothing on the screen. After that one coax was

I have been offered a Tek RSA 3408A RTSA in reasonably good condition with a years calibration certificate (NABL accredited) I would like to know if any of our members could help me find a realistic

I am not the seller but I know these are sought after for those that have the scope that needs them Price seems good.

Guys, I already checked the crt using my 752 tube tester with the settings to a TV B/W crt. It comes up normally and tests fine. I tested other Tek. crts that come up faster. The readings were close

Correct no image on the crt or even using the beam find. But all the other switching(lights) on the face panel work. I'm trying to figure it out, and I love all the input and help from you guys. I

G'day John, You can add me to the Aussie group. I believe I have been an interested member to the group for at least the last 20 years. I cut my teeth on TV Waveform Monitors, and had extensive

As far as shipping via UPS? ALWAYS insure for something far higher than cost, declare it as FRAGILE ELECTRONIC EQUIPMENT, <whatever it is>, and have the UPS counter (NOT a UPS storefront) verify the

One thing to note on the 7603, if you remove the power supply Take LOTS of photos and triple check the connectors before turning the scope on. There are 2 connectors in particular that need attention.

John, I am in Armidale NSW. Now... Where are you??? Dean VK2DJD

Hi all, It appears that I’ll have no trouble finding homes for all of these scopes. Accordingly, I’m going to revert to my “local pickup only” policy. If we have already discussed shipping,