These mask guys have been doing this on other groups. Dennis is 100% correct in his new policy. They ask some question, usually a how-to, and get approved. Then after they're approved here it

I recently obtained a SONY/TEKTRONIX AWG2005. It had a couple of issues. First the power supply would quit working after it warmed up for about 30 minutes and would not restart until it cooled

Hi Jim, I found the cause of the trigger problem with my TDS6604. It was the trigger chip - luckily we have an SMD repair station at my work -> they are not too hard to replace if you have hot

There is a TekScopes2 already and they are more agreeable to having off topic conversations. I for one would appreciate it if you took this over there Log into Groups.IO and search on TEKSCOPES

I plead GUILTY AS CHARGED (yes, all upper-case). Sorry for bringing this (admittedly interesting) subject up. This thread was about “Preventing [email] spam”, not finding variants of

I was only born 20 years later, in 1966, but I do remember the US Corned Beef rations we could still buy (new) surplus of, from the grocery store. Is this what you’re referring to?

I’m sure you could warm up yours in/on top of some of the Tek scopes. (If you really care, the Wikipedia article is great: https://en.wikipedia.org/wiki/Spam_(food) And, yes, Lend-Lease figures

As far as I remember (I was only born in 1946, though) that Spam was sent to the UK in the "Lease/Lend" agreement in order to give the hungry British some kind of meat to sustain themselves. The name

On Mon, Aug 3, 2020 at 10:33 PM, Colin Herbert wrote: Interleaved > > The pdf manual that I have doesn't suggest that there is a detent. However , > it describes it as a "Frequency Vernier" and

The pdf manual that I have doesn't suggest that there is a detent. However , it describes it as a "Frequency Vernier" and labels it "CAL". Confusingly, the photo on TekWiki labels it "VAR". My FG503

Hi satbeginner My measuring oscilloscope is set at 1×. May be the probe has it self the attenuation factor of 10 I will check once more. And measure the temperature. I was able to put on the

(FYI, you were talking about “spam”. “SPAM”® is a brand for a delicious, inexpensive precooked canned meat product, held by Hormel Foods Corporation. Thank you for listening to this Public

I didn't raise the point at the time, and 'm really not trying to tell you "how to suck eggs": Did you check with the person involved? It is possible that his email had been hi-jacked, and that he

In gated mode the readout displays between sweeps, so if you have nothing to trigger the sweep then you get no readout, I just checked this on a 7904. It is quite easy to accidentally knock the AB

Hi Saroy, In the light of some comments on this thread, I first want to express my respect for your perseverance in trying getting this Tektronix 2230 scope repaired :-) Back to the topic on hand:

Hi, I'll be very much interested in it. I also have a recently resurrected 2021. Szabolcs Martin Hodge <mhodge@...> ezt írta (időpont: 2020. aug. 4., K, 4:32):

hi, Apologies in advance, if Not appropriate: Is it ok to ask the experts in this forum: -- What Tek equipment & methods could be used, for the accurate measurements of Super Capacitors ? For

Ebay has been taking a shipping cut for years (not sure how long, probably around 2012?).  I stopped selling scopes because of that, as $120 shipping on an item that might sell for $35 isn't worth

Dennis, I enjoy the knowledge I gain from this conversion and would like it to continue. A lot of us feel the same. Thank you Tom Tucker  W4TUC

After having repaired on of these units I was searching all over for the sample waveform disk (P/N 063-2169-00) or even just the files from the disk. Recently I finally found one on eBay and verified