Sean, Thanks. That fuse looks pretty easy to make with a 3D printer and an electroplater. If someone wants a 3D printer but SWMBO says no, here's a good argument for getting one. "It's a

Hi, I have the plotter but it has RS232C option & Centronics interfaces only. Would like to get hold of the GPIB board in case any list member knows of the whereabouts of one. Thanks!

I forgot to mention: If interested, please contact me directly: johngord (at) verizon (dot) net --John johngord@...

Free for pickup: Tektronix C1001 BW CCD camera. I live in Venice, California. --John Gord

Hi John, I'm sure Tek's 7904/7A19/7B90 introduction was sweet revenge. HP switched to battling for the crown in Portables next but Tek was on solid ground starting with the first 1nSec risetime 485

Hi Tony, The very reason Tek designed their manuals with large sheets for their schematics was because there is a lot of circuitry on each page. Tek is widely recognized as creating the finest service

The process of transferring a program into the 4041 won't work with most of the System Verification files without a working tape drive, as those programs are called by the SYSVER program as

In my 4041 experiments this weekend, I was able to run the System Verification program by transferring the .asc version I have archived from my PC into the 4041. However, I have to modify steps 4 and

Hi Sean, The revised March 1988 7104 Operators Manual says the display of the 7D01 Hardware Logic Analyzer and the 7D02 Software Logic Analyzer can cause permanent reduction in CRT microchannel plate

Dennis, I should also say that I have great respect for HP. No intention to insinuate that HP products were not good or not many times better than those of Tektronix. As you said, they make a huge

Hi Neil, It would be nice to see all of them organized in one place. Unfortunately there are logistic problems that make this very difficult. As far as I know Tek rarely published application notes in

Hi Tony, Dennis, .et al.: Yes... I think I remember that... seeing the old site... and I've run across this newer? site many times... as a result of a DuckDuckGo search... but, I never trusted it

Well Hello Magnus! You have been very quiet for a long time. It is nice to hear from you. I hope all is well. Dennis

I got tired up cutting and pasting schematics and picked up a inkjet plotter/printer off of craigslist for $50. Now I can print things up to 36 inches wide. It really helps sometimes to blow things

Hi Michael, Your insights about the sales game explains a great deal about the motivation within the marketing department that produced this ad. I think the marketing team that created it deserve an

Dennis, I checked my links and see I visited the opweb.de site in the past and they had a different link icon and page when I originally saved the link. Guess that site has been around for at least a

Stupid me. I print them out and tape them together.  Sometimes this doesn't work too well because the scans are not all the same scale.  The print routine for our hp-Envy has a scaling function,

Hi, everybody. I'm looking for a schematic for the Benchtop Controller module that goes in the TLA711 logic analyzer mainframe. The Benchtop Controller says "039-0039-03" on it, and I have the

My 7584 is suffering with ROM failure, so I decided to buy some 2364 to 2764 adapter boards and fit 2764s instead; however, the adapter boards are too long and overlap the adjacent ROM sockets. Given

Hi Tony, The multipage scans are not exactly unuseful, but there is one for the 410C that is rather difficult to follow due to the number of lines that cross from one sheet to the next and seeing