Date   

Re: Tek492 blank CRT. Please help

lawrenceahlstrom
 

Look for shorted tantal capacitors (general, typical) and check psu voltages.
/Lars


-------- Originalmeddelande --------
Från: "pjwalczak@... [TekScopes]" <TekScopes@...>
Datum:2017-02-15 09:16 (GMT+01:00)
Till: TekScopes@...
Kopia:
Rubrik: [TekScopes] Tek492 blank CRT. Please help

I have an old Tek492. Bought it second hand, but was working fine for a couple of years. Today when I have switched it on, after a long break (almost a year) - it powered OK, all controls seems to be ok, but there is nothing shown on the CRT. Can anybody share some tips what can be done to find the cause and fix it ? [Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


Tek492 blank CRT. Please help

pjwalczak@...
 

I have an old Tek492. Bought it second hand, but was working fine
for a couple of years. Today when I have switched it on, after a long
break (almost a year) - it powered OK, all controls seems to be ok,
but there is nothing shown on the CRT.

Can anybody share some tips what can be done to find the cause
and fix it ?


Re: B92A no sweep

Michael A. Terrell
 

That sounds more like a polystyrene capacitor.

-----Original Message-----
From: "tatumj1@... [TekScopes]" <TekScopes@...>
Sent: Feb 14, 2017 6:36 PM
To: TekScopes@...
Subject: Re: [TekScopes] B92A no sweep

It was a small mylar cap. The ones that are cased in clear plastic. They look silver as you can see the foil inside. I doubt it would work on an electrolytic. I do not remember ever making anything work by heating an electrolytic. I suppose it could, maybe does, happen. I remember trying to heat the exposed metal on some but do not remember that it ever helped.



Michael A. Terrell


Re: B92A no sweep

 

Everything, even a humble piece of solid wire, has failure mechanisms. Humans have lots of them. Stars have them on a longer scale. The fundamental particles in the universe have failure mechanisms too and eventually decay although the timescale for those is hundreds of orders of magnitude longer. It is all just a matter of time and of failure rates.

Good engineering involves balancing things like failure rates, costs, space constraints, manpower, parts availability, repairability, usability, uniqueness, etc.

Dennis Tillman W7PF

-----Original Message-----
Sent: Tuesday, February 14, 2017 7:41 PM
Subject: Re: [TekScopes] B92A no sweep

Apparently electrolytic's aren't the only cap that can fail.

From: "tatumj1@... [TekScopes]" <TekScopes@...>
To: TekScopes@...
Sent: Tuesday, February 14, 2017 3:36 PM
Subject: Re: [TekScopes] B92A no sweep

It was a small mylar cap. The ones that are cased in clear plastic. They look silver as you can see the foil inside. I doubt it would work on an electrolytic. I do not remember ever making anything work by heating an electrolytic. I suppose it could, maybe does, happen. I remember trying to heat the exposed metal on some but do not remember that it ever helped.

------------------------------------
Posted by: Brent Watson <brentleew2003@...>
------------------------------------


O.T.schematic

wa6bsw@...
 

Thought I would try this group as it seems to have more knowledgeable members than most. The compass/temp module in my '94 Dakota has died and I can't find a replacement. I need a schematic for it or a working used unit. The same unit is used in the '92-93 LaBaron. Thanks for any help.
Jerry


Re: B92A no sweep

Brent Watson <brentleew2003@...>
 

But fail very rarely


From: "Brent Watson brentleew2003@... [TekScopes]" <TekScopes@...>
To: "TekScopes@..." <TekScopes@...>
Sent: Tuesday, February 14, 2017 7:40 PM
Subject: Re: [TekScopes] B92A no sweep

  Apparently electrolytic's aren't the only cap that can fail.

From: "tatumj1@... [TekScopes]" <TekScopes@...>
To: TekScopes@...
Sent: Tuesday, February 14, 2017 3:36 PM
Subject: Re: [TekScopes] B92A no sweep

  It was a small mylar cap. The ones that are cased in clear plastic. They look silver as you can see the foil inside. I doubt it would work on an electrolytic. I do not remember ever making anything work by heating an electrolytic. I suppose it could, maybe does, happen. I remember trying to heat the exposed metal on some but do not remember that it ever helped.

[Non-text portions of this message have been removed]

#yiv7144454651 #yiv7144454651 -- #yiv7144454651ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv7144454651 #yiv7144454651ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv7144454651 #yiv7144454651ygrp-mkp #yiv7144454651hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv7144454651 #yiv7144454651ygrp-mkp #yiv7144454651ads {margin-bottom:10px;}#yiv7144454651 #yiv7144454651ygrp-mkp .yiv7144454651ad {padding:0 0;}#yiv7144454651 #yiv7144454651ygrp-mkp .yiv7144454651ad p {margin:0;}#yiv7144454651 #yiv7144454651ygrp-mkp .yiv7144454651ad a {color:#0000ff;text-decoration:none;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ygrp-lc {font-family:Arial;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ygrp-lc #yiv7144454651hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ygrp-lc .yiv7144454651ad {margin-bottom:10px;padding:0 0;}#yiv7144454651 #yiv7144454651actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv7144454651 #yiv7144454651activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv7144454651 #yiv7144454651activity span {font-weight:700;}#yiv7144454651 #yiv7144454651activity span:first-child {text-transform:uppercase;}#yiv7144454651 #yiv7144454651activity span a {color:#5085b6;text-decoration:none;}#yiv7144454651 #yiv7144454651activity span span {color:#ff7900;}#yiv7144454651 #yiv7144454651activity span .yiv7144454651underline {text-decoration:underline;}#yiv7144454651 .yiv7144454651attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv7144454651 .yiv7144454651attach div a {text-decoration:none;}#yiv7144454651 .yiv7144454651attach img {border:none;padding-right:5px;}#yiv7144454651 .yiv7144454651attach label {display:block;margin-bottom:5px;}#yiv7144454651 .yiv7144454651attach label a {text-decoration:none;}#yiv7144454651 blockquote {margin:0 0 0 4px;}#yiv7144454651 .yiv7144454651bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv7144454651 .yiv7144454651bold a {text-decoration:none;}#yiv7144454651 dd.yiv7144454651last p a {font-family:Verdana;font-weight:700;}#yiv7144454651 dd.yiv7144454651last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv7144454651 dd.yiv7144454651last p span.yiv7144454651yshortcuts {margin-right:0;}#yiv7144454651 div.yiv7144454651attach-table div div a {text-decoration:none;}#yiv7144454651 div.yiv7144454651attach-table {width:400px;}#yiv7144454651 div.yiv7144454651file-title a, #yiv7144454651 div.yiv7144454651file-title a:active, #yiv7144454651 div.yiv7144454651file-title a:hover, #yiv7144454651 div.yiv7144454651file-title a:visited {text-decoration:none;}#yiv7144454651 div.yiv7144454651photo-title a, #yiv7144454651 div.yiv7144454651photo-title a:active, #yiv7144454651 div.yiv7144454651photo-title a:hover, #yiv7144454651 div.yiv7144454651photo-title a:visited {text-decoration:none;}#yiv7144454651 div#yiv7144454651ygrp-mlmsg #yiv7144454651ygrp-msg p a span.yiv7144454651yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv7144454651 .yiv7144454651green {color:#628c2a;}#yiv7144454651 .yiv7144454651MsoNormal {margin:0 0 0 0;}#yiv7144454651 o {font-size:0;}#yiv7144454651 #yiv7144454651photos div {float:left;width:72px;}#yiv7144454651 #yiv7144454651photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#yiv7144454651 #yiv7144454651photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv7144454651 #yiv7144454651reco-category {font-size:77%;}#yiv7144454651 #yiv7144454651reco-desc {font-size:77%;}#yiv7144454651 .yiv7144454651replbq {margin:4px;}#yiv7144454651 #yiv7144454651ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv7144454651 #yiv7144454651ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv7144454651 #yiv7144454651ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv7144454651 #yiv7144454651ygrp-mlmsg select, #yiv7144454651 input, #yiv7144454651 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv7144454651 #yiv7144454651ygrp-mlmsg pre, #yiv7144454651 code {font:115% monospace;}#yiv7144454651 #yiv7144454651ygrp-mlmsg * {line-height:1.22em;}#yiv7144454651 #yiv7144454651ygrp-mlmsg #yiv7144454651logo {padding-bottom:10px;}#yiv7144454651 #yiv7144454651ygrp-msg p a {font-family:Verdana;}#yiv7144454651 #yiv7144454651ygrp-msg p#yiv7144454651attach-count span {color:#1E66AE;font-weight:700;}#yiv7144454651 #yiv7144454651ygrp-reco #yiv7144454651reco-head {color:#ff7900;font-weight:700;}#yiv7144454651 #yiv7144454651ygrp-reco {margin-bottom:20px;padding:0px;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ov li a {font-size:130%;text-decoration:none;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ov ul {margin:0;padding:0 0 0 8px;}#yiv7144454651 #yiv7144454651ygrp-text {font-family:Georgia;}#yiv7144454651 #yiv7144454651ygrp-text p {margin:0 0 1em 0;}#yiv7144454651 #yiv7144454651ygrp-text tt {font-size:120%;}#yiv7144454651 #yiv7144454651ygrp-vital ul li:last-child {border-right:none !important;}#yiv7144454651



#yiv7552423358 #yiv7552423358 -- #yiv7552423358ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv7552423358 #yiv7552423358ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv7552423358 #yiv7552423358ygrp-mkp #yiv7552423358hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv7552423358 #yiv7552423358ygrp-mkp #yiv7552423358ads {margin-bottom:10px;}#yiv7552423358 #yiv7552423358ygrp-mkp .yiv7552423358ad {padding:0 0;}#yiv7552423358 #yiv7552423358ygrp-mkp .yiv7552423358ad p {margin:0;}#yiv7552423358 #yiv7552423358ygrp-mkp .yiv7552423358ad a {color:#0000ff;text-decoration:none;}#yiv7552423358 #yiv7552423358ygrp-sponsor #yiv7552423358ygrp-lc {font-family:Arial;}#yiv7552423358 #yiv7552423358ygrp-sponsor #yiv7552423358ygrp-lc #yiv7552423358hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv7552423358 #yiv7552423358ygrp-sponsor #yiv7552423358ygrp-lc .yiv7552423358ad {margin-bottom:10px;padding:0 0;}#yiv7552423358 #yiv7552423358actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv7552423358 #yiv7552423358activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv7552423358 #yiv7552423358activity span {font-weight:700;}#yiv7552423358 #yiv7552423358activity span:first-child {text-transform:uppercase;}#yiv7552423358 #yiv7552423358activity span a {color:#5085b6;text-decoration:none;}#yiv7552423358 #yiv7552423358activity span span {color:#ff7900;}#yiv7552423358 #yiv7552423358activity span .yiv7552423358underline {text-decoration:underline;}#yiv7552423358 .yiv7552423358attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv7552423358 .yiv7552423358attach div a {text-decoration:none;}#yiv7552423358 .yiv7552423358attach img {border:none;padding-right:5px;}#yiv7552423358 .yiv7552423358attach label {display:block;margin-bottom:5px;}#yiv7552423358 .yiv7552423358attach label a {text-decoration:none;}#yiv7552423358 blockquote {margin:0 0 0 4px;}#yiv7552423358 .yiv7552423358bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv7552423358 .yiv7552423358bold a {text-decoration:none;}#yiv7552423358 dd.yiv7552423358last p a {font-family:Verdana;font-weight:700;}#yiv7552423358 dd.yiv7552423358last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv7552423358 dd.yiv7552423358last p span.yiv7552423358yshortcuts {margin-right:0;}#yiv7552423358 div.yiv7552423358attach-table div div a {text-decoration:none;}#yiv7552423358 div.yiv7552423358attach-table {width:400px;}#yiv7552423358 div.yiv7552423358file-title a, #yiv7552423358 div.yiv7552423358file-title a:active, #yiv7552423358 div.yiv7552423358file-title a:hover, #yiv7552423358 div.yiv7552423358file-title a:visited {text-decoration:none;}#yiv7552423358 div.yiv7552423358photo-title a, #yiv7552423358 div.yiv7552423358photo-title a:active, #yiv7552423358 div.yiv7552423358photo-title a:hover, #yiv7552423358 div.yiv7552423358photo-title a:visited {text-decoration:none;}#yiv7552423358 div#yiv7552423358ygrp-mlmsg #yiv7552423358ygrp-msg p a span.yiv7552423358yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv7552423358 .yiv7552423358green {color:#628c2a;}#yiv7552423358 .yiv7552423358MsoNormal {margin:0 0 0 0;}#yiv7552423358 o {font-size:0;}#yiv7552423358 #yiv7552423358photos div {float:left;width:72px;}#yiv7552423358 #yiv7552423358photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#yiv7552423358 #yiv7552423358photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv7552423358 #yiv7552423358reco-category {font-size:77%;}#yiv7552423358 #yiv7552423358reco-desc {font-size:77%;}#yiv7552423358 .yiv7552423358replbq {margin:4px;}#yiv7552423358 #yiv7552423358ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv7552423358 #yiv7552423358ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv7552423358 #yiv7552423358ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv7552423358 #yiv7552423358ygrp-mlmsg select, #yiv7552423358 input, #yiv7552423358 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv7552423358 #yiv7552423358ygrp-mlmsg pre, #yiv7552423358 code {font:115% monospace;}#yiv7552423358 #yiv7552423358ygrp-mlmsg * {line-height:1.22em;}#yiv7552423358 #yiv7552423358ygrp-mlmsg #yiv7552423358logo {padding-bottom:10px;}#yiv7552423358 #yiv7552423358ygrp-msg p a {font-family:Verdana;}#yiv7552423358 #yiv7552423358ygrp-msg p#yiv7552423358attach-count span {color:#1E66AE;font-weight:700;}#yiv7552423358 #yiv7552423358ygrp-reco #yiv7552423358reco-head {color:#ff7900;font-weight:700;}#yiv7552423358 #yiv7552423358ygrp-reco {margin-bottom:20px;padding:0px;}#yiv7552423358 #yiv7552423358ygrp-sponsor #yiv7552423358ov li a {font-size:130%;text-decoration:none;}#yiv7552423358 #yiv7552423358ygrp-sponsor #yiv7552423358ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv7552423358 #yiv7552423358ygrp-sponsor #yiv7552423358ov ul {margin:0;padding:0 0 0 8px;}#yiv7552423358 #yiv7552423358ygrp-text {font-family:Georgia;}#yiv7552423358 #yiv7552423358ygrp-text p {margin:0 0 1em 0;}#yiv7552423358 #yiv7552423358ygrp-text tt {font-size:120%;}#yiv7552423358 #yiv7552423358ygrp-vital ul li:last-child {border-right:none !important;}#yiv7552423358



[Non-text portions of this message have been removed]


Re: B92A no sweep

Brent Watson <brentleew2003@...>
 

Apparently electrolytic's aren't the only cap that can fail.

From: "tatumj1@... [TekScopes]" <TekScopes@...>
To: TekScopes@...
Sent: Tuesday, February 14, 2017 3:36 PM
Subject: Re: [TekScopes] B92A no sweep

  It was a small mylar cap. The ones that are cased in clear plastic. They look silver as you can see the foil inside. I doubt it would work on an electrolytic. I do not remember ever making anything work by heating an electrolytic. I suppose it could, maybe does, happen. I remember trying to heat the exposed metal on some but do not remember that it ever helped.

[Non-text portions of this message have been removed]

#yiv7144454651 #yiv7144454651 -- #yiv7144454651ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv7144454651 #yiv7144454651ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv7144454651 #yiv7144454651ygrp-mkp #yiv7144454651hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv7144454651 #yiv7144454651ygrp-mkp #yiv7144454651ads {margin-bottom:10px;}#yiv7144454651 #yiv7144454651ygrp-mkp .yiv7144454651ad {padding:0 0;}#yiv7144454651 #yiv7144454651ygrp-mkp .yiv7144454651ad p {margin:0;}#yiv7144454651 #yiv7144454651ygrp-mkp .yiv7144454651ad a {color:#0000ff;text-decoration:none;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ygrp-lc {font-family:Arial;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ygrp-lc #yiv7144454651hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ygrp-lc .yiv7144454651ad {margin-bottom:10px;padding:0 0;}#yiv7144454651 #yiv7144454651actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv7144454651 #yiv7144454651activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv7144454651 #yiv7144454651activity span {font-weight:700;}#yiv7144454651 #yiv7144454651activity span:first-child {text-transform:uppercase;}#yiv7144454651 #yiv7144454651activity span a {color:#5085b6;text-decoration:none;}#yiv7144454651 #yiv7144454651activity span span {color:#ff7900;}#yiv7144454651 #yiv7144454651activity span .yiv7144454651underline {text-decoration:underline;}#yiv7144454651 .yiv7144454651attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv7144454651 .yiv7144454651attach div a {text-decoration:none;}#yiv7144454651 .yiv7144454651attach img {border:none;padding-right:5px;}#yiv7144454651 .yiv7144454651attach label {display:block;margin-bottom:5px;}#yiv7144454651 .yiv7144454651attach label a {text-decoration:none;}#yiv7144454651 blockquote {margin:0 0 0 4px;}#yiv7144454651 .yiv7144454651bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv7144454651 .yiv7144454651bold a {text-decoration:none;}#yiv7144454651 dd.yiv7144454651last p a {font-family:Verdana;font-weight:700;}#yiv7144454651 dd.yiv7144454651last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv7144454651 dd.yiv7144454651last p span.yiv7144454651yshortcuts {margin-right:0;}#yiv7144454651 div.yiv7144454651attach-table div div a {text-decoration:none;}#yiv7144454651 div.yiv7144454651attach-table {width:400px;}#yiv7144454651 div.yiv7144454651file-title a, #yiv7144454651 div.yiv7144454651file-title a:active, #yiv7144454651 div.yiv7144454651file-title a:hover, #yiv7144454651 div.yiv7144454651file-title a:visited {text-decoration:none;}#yiv7144454651 div.yiv7144454651photo-title a, #yiv7144454651 div.yiv7144454651photo-title a:active, #yiv7144454651 div.yiv7144454651photo-title a:hover, #yiv7144454651 div.yiv7144454651photo-title a:visited {text-decoration:none;}#yiv7144454651 div#yiv7144454651ygrp-mlmsg #yiv7144454651ygrp-msg p a span.yiv7144454651yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv7144454651 .yiv7144454651green {color:#628c2a;}#yiv7144454651 .yiv7144454651MsoNormal {margin:0 0 0 0;}#yiv7144454651 o {font-size:0;}#yiv7144454651 #yiv7144454651photos div {float:left;width:72px;}#yiv7144454651 #yiv7144454651photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#yiv7144454651 #yiv7144454651photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv7144454651 #yiv7144454651reco-category {font-size:77%;}#yiv7144454651 #yiv7144454651reco-desc {font-size:77%;}#yiv7144454651 .yiv7144454651replbq {margin:4px;}#yiv7144454651 #yiv7144454651ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv7144454651 #yiv7144454651ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv7144454651 #yiv7144454651ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv7144454651 #yiv7144454651ygrp-mlmsg select, #yiv7144454651 input, #yiv7144454651 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv7144454651 #yiv7144454651ygrp-mlmsg pre, #yiv7144454651 code {font:115% monospace;}#yiv7144454651 #yiv7144454651ygrp-mlmsg * {line-height:1.22em;}#yiv7144454651 #yiv7144454651ygrp-mlmsg #yiv7144454651logo {padding-bottom:10px;}#yiv7144454651 #yiv7144454651ygrp-msg p a {font-family:Verdana;}#yiv7144454651 #yiv7144454651ygrp-msg p#yiv7144454651attach-count span {color:#1E66AE;font-weight:700;}#yiv7144454651 #yiv7144454651ygrp-reco #yiv7144454651reco-head {color:#ff7900;font-weight:700;}#yiv7144454651 #yiv7144454651ygrp-reco {margin-bottom:20px;padding:0px;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ov li a {font-size:130%;text-decoration:none;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv7144454651 #yiv7144454651ygrp-sponsor #yiv7144454651ov ul {margin:0;padding:0 0 0 8px;}#yiv7144454651 #yiv7144454651ygrp-text {font-family:Georgia;}#yiv7144454651 #yiv7144454651ygrp-text p {margin:0 0 1em 0;}#yiv7144454651 #yiv7144454651ygrp-text tt {font-size:120%;}#yiv7144454651 #yiv7144454651ygrp-vital ul li:last-child {border-right:none !important;}#yiv7144454651



[Non-text portions of this message have been removed]


Tektronix 2755AP/494AP Video Processor Adjustment Procedure

rast tro
 

I hope I'm not too off topic asking about a spectrum analyzer on this forum.

I'm looking for information on adjusting the Video Processor on a Tek 2755/494AP Spectrum analyzer.
A40 Video Processor PCB 670-8389-01

I have the service manual but adjustments for this board is not covered.
There are a few paragraphs on theory and a schematic but no explanation on how to adjust 22 potentiometers. These mostly effect band-4 leveling.

Any insights or suggestions would be appreciated.

-rastro


Re: B92A no sweep

Joseph Tatum
 

You are right. I don't ever remember finding another one bad. That one was in an old CRT type computer monitor I bought at Fort Rucker Alabama DOD sale.


Re: OT Ripple Leader LTC-905

Jerry Massengale <jmassen418@...>
 

Hi,

Yes, mine has a 3 wire power cord and the green wire is tied to the chassis
as is the system ground. I looked at the 3 dc power busses and they are
clean and at the correct voltage. The output of the step generator looks
good at the output of the buffer. I am concerned with a very long ground
bus directly tied to earth. I was tempted to disconnect chassis gnd from
signal gnd but decided to sell it instead. Another issue is the 3 banana
jacks for the transistor connection are not on the standard 0.75 inch
spacing that fit my adapters. This is all part of my downsizing efforts. I
recently sold my 576 that I really liked. One option was to use a 7CT1N
with my 7704A, The other was to acquire the Leader LTC-905 and use it with
my 2465A. I put the 905 on ebay for a very low price and will soon put the
2465A up for sale.

jerry

On Tue, Feb 14, 2017 at 3:24 PM, Clark bclark207@... [TekScopes] <
TekScopes@...> wrote:

What does the earth connection connect to in the curve tracer? Mine has
an original two-wire cord with standard two-prong plug - not even
polarized.


On 02/14/2017 02:24 PM, Jerry Massengale jmassen418@...
[TekScopes] wrote:

Hi,

Replacing the 4 rectifiers greatly reduced the ripple. My trace looks
like
that shown in manual. I have decided to sell the LTC-905 and keep my
7CT1N.
This unit has the 3 wire power cable.

On Tue, Feb 14, 2017 at 6:33 AM, Clark bclark207@... [TekScopes] <
TekScopes@...> wrote:

Ripple, or phase error? - see section B on pg 3 in the users manual. I
had the same problem, and solved it by reversing the curve tracer plug
in the wall outlet.


On 02/13/2017 03:01 PM, Jerry Massengale jmassen418@...
[TekScopes] wrote:

Hi,

My just recieved Leader LTC-905 Curve Tracer has a small ripple on
the
display curves as displayed on my 2465A scope. The electrolytics in
the box
have good ESR. Suggestions?

jerry









------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links











------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links




Re: B92A no sweep

 

Generally speaking these are very reliable, and have very low leakage if
this is the one I am thinking of. That is important for a linear ramp.

Dennis Tillman W7PF

-----Original Message-----
Sent: Tuesday, February 14, 2017 3:37 PM
Subject: Re: [TekScopes] B92A no sweep

It was a small mylar cap. The ones that are cased in clear plastic. They
look silver as you can see the foil inside. I doubt it would work on an
electrolytic. I do not remember ever making anything work by heating an
electrolytic. I suppose it could, maybe does, happen. I remember trying to
heat the exposed metal on some but do not remember that it ever helped.
------------------------------------
Posted by: tatumj1@...
------------------------------------


Re: B92A no sweep

Joseph Tatum
 

It was a small mylar cap. The ones that are cased in clear plastic. They look silver as you can see the foil inside. I doubt it would work on an electrolytic. I do not remember ever making anything work by heating an electrolytic. I suppose it could, maybe does, happen. I remember trying to heat the exposed metal on some but do not remember that it ever helped.


Re: OT Ripple Leader LTC-905

tronix_cal
 

What does the earth connection connect to in the curve tracer? Mine has
an original two-wire cord with standard two-prong plug - not even polarized.


On 02/14/2017 02:24 PM, Jerry Massengale jmassen418@...
[TekScopes] wrote:

Hi,

Replacing the 4 rectifiers greatly reduced the ripple. My trace looks like
that shown in manual. I have decided to sell the LTC-905 and keep my
7CT1N.
This unit has the 3 wire power cable.

On Tue, Feb 14, 2017 at 6:33 AM, Clark bclark207@... [TekScopes] <
TekScopes@...> wrote:

Ripple, or phase error? - see section B on pg 3 in the users manual. I
had the same problem, and solved it by reversing the curve tracer plug
in the wall outlet.


On 02/13/2017 03:01 PM, Jerry Massengale jmassen418@...
[TekScopes] wrote:

Hi,

My just recieved Leader LTC-905 Curve Tracer has a small ripple on the
display curves as displayed on my 2465A scope. The electrolytics in
the box
have good ESR. Suggestions?

jerry

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links



[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]


Re: B92A no sweep

brentleew2003@yahoo.com <brentleew2003@...>
 

I wonder if you recall what kind of cap that was that you found with the resista-heater. I only think of electrolytics being subject to age. But I imagine others could fail as well.
Happy Connecting. Sent from my Sprint Phone.

------ Original message------From: tatumj1@... [TekScopes] Date: Tue, Feb 14, 2017 10:11To: TekScopes@...;Subject:RE: [TekScopes] B92A no sweep
  On the 2465 I just got going, heating the board with a hair drier worked to make it start working right. But freezing would not make it act up. Had to heat the MUX with a soldering iron to isolate the problem.

When you do need freeze spray and do not have easy access to it; get a can of compressed air that is used to blow dust from computers. You can turn it upside down and get the same effect as the freeze spray.

I once had a problem with a computer monitor that would come on when heated. I put a wire wound resister on the end of a dowel and connected it to a 12 v supply. I used that to reach into its innards and isolate a small cap that was causing the problem.

Probably none of the is news to most on here, but it might help sombody. Hope so anyway.

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]


Re: OT Ripple Leader LTC-905

Jerry Massengale <jmassen418@...>
 

Hi,

Replacing the 4 rectifiers greatly reduced the ripple. My trace looks like
that shown in manual. I have decided to sell the LTC-905 and keep my 7CT1N.
This unit has the 3 wire power cable.

On Tue, Feb 14, 2017 at 6:33 AM, Clark bclark207@... [TekScopes] <
TekScopes@...> wrote:

Ripple, or phase error? - see section B on pg 3 in the users manual. I
had the same problem, and solved it by reversing the curve tracer plug
in the wall outlet.


On 02/13/2017 03:01 PM, Jerry Massengale jmassen418@...
[TekScopes] wrote:

Hi,

My just recieved Leader LTC-905 Curve Tracer has a small ripple on the
display curves as displayed on my 2465A scope. The electrolytics in
the box
have good ESR. Suggestions?

jerry









------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links




Re: B92A no sweep

brentleew2003@yahoo.com <brentleew2003@...>
 

I like the power resistor/heater plan. Very area specific, too. 
Happy Connecting. Sent from my Sprint Phone.

------ Original message------From: tatumj1@... [TekScopes] Date: Tue, Feb 14, 2017 10:11To: TekScopes@...;Subject:RE: [TekScopes] B92A no sweep
  On the 2465 I just got going, heating the board with a hair drier worked to make it start working right. But freezing would not make it act up. Had to heat the MUX with a soldering iron to isolate the problem.

When you do need freeze spray and do not have easy access to it; get a can of compressed air that is used to blow dust from computers. You can turn it upside down and get the same effect as the freeze spray.

I once had a problem with a computer monitor that would come on when heated. I put a wire wound resister on the end of a dowel and connected it to a 12 v supply. I used that to reach into its innards and isolate a small cap that was causing the problem.

Probably none of the is news to most on here, but it might help sombody. Hope so anyway.

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]


LF Compensation of a 468 scope

Colin Herbert
 

Hi,

Does no-one have any observations on this? Perhaps I am being too impatient.

I have ordered two of these BNC-to-Peltola adapters from Qservice, so I have
to wait a while for the delivery before I can do much more. I remain puzzled
that this scope and the 465B and no others in the 46x series (or the 475A)
use this method.

Colin.



From: TekScopes@... [mailto:TekScopes@...]
Sent: 11 February 2017 20:45
To: TekScopes@...
Subject: RE: [TekScopes] Gain calibration of a 468 scope





Continuing..

I have now got to the point of trying to adjust the Low-Frequency
Compensation. I believe that I have a little too much overshoot. The manual
states that on the Vertical Output Board there are five pre-sets which
affect the compensation at 1, 10 and 100KHz. That is all very well, but
there is also a requirement set the 486 vertical mode to CH1 & CH2 alternate
and disconnect P686 from J686 on the interface board. This J686 is the "Vert
Alt Sync". Now, either a 1KHz square-wave from a low-frequency generator (an
SG502?), or the fast-rise negative output from the PG506 is connected to
J686 with a BNC-to-Peltola adaptor. I don't understand why this is
considered to be necessary or what it is actually doing.

Neither the 464 nor the 465 scopes use this protocol, but the 465B does. Is
it really necessary, or could one simply leave P686/J686 connected and just
adjust the pre-set on the Vertical Output Board?

Any help and information appreciated. I am learning a lot fiddling with this
beast.

Colin.





_____

No virus found in this message.
Checked by AVG - www.avg.com <http://www.avg.com/email-signature>
Version: 2016.0.7998 / Virus Database: 4756/13926 - Release Date: 02/10/17


Re: B92A no sweep

Joseph Tatum
 

On the 2465 I just got going, heating the board with a hair drier worked to make it start working right. But freezing would not make it act up. Had to heat the MUX with a soldering iron to isolate the problem.

When you do need freeze spray and do not have easy access to it; get a can of compressed air that is used to blow dust from computers. You can turn it upside down and get the same effect as the freeze spray.

I once had a problem with a computer monitor that would come on when heated. I put a wire wound resister on the end of a dowel and connected it to a 12 v supply. I used that to reach into its innards and isolate a small cap that was causing the problem.

Probably none of the is news to most on here, but it might help sombody. Hope so anyway.


Re: B92A no sweep

Brent Watson <brentleew2003@...>
 

Thanks Dennis,I did try the freeze spray, I though I had a result but then chalked it up to random, intermittent activity.I did try my heat gun attached to my reflow station and kept it all quite tame. Neither gave the response I was hoping. But I did run out of freeze spray before I could reach any solid conclusions, and I did not have the extender at that point. I thought I had a reaction to cold on the back ( covered by the sweep logic board) half of the interface board (B069999 and up) possibly Q902, Q912 or Q900, Q910. But I pulled and checked them and they test out OK.I will keep digging: the logic is thick though.

From: "'Dennis Tillman' @Dennis_Tillman_W7pF [TekScopes]" <TekScopes@...>
To: TekScopes@...
Sent: Tuesday, February 14, 2017 9:03 AM
Subject: RE: [TekScopes] B92A no sweep

  Hi Brent,
To get an intermittent to act up I reach for two things. I grab a can of
freeze spray, and a hair dryer. Use the hair dryer to warm up the entire
plugin. Do not use a Hot Air Gun - it gets too hot.

The freeze spray allows you to focus tighter on individual ICs or on small
areas of the PC board. More often than not the heat or the cold will trigger
an intermittent back to life.

Dennis Tillman W7PF

-----Original Message-----
Sent: Monday, February 13, 2017 8:17 PM
Subject: [TekScopes] B92A no sweep

I forgot to mention that, initially last week the problem began with the
sweep working fine for the first 30 seconds and then quit. It might come
back for a few moments, even another 30 seconds on occasion before not
working at all: I assumed from a component warming up. This week however it
has not worked at all. I was able to use a thermal camera to look at heat on
the boards and found nothing unusual.Whatever it is, it isn't intermittent
any longer.
------------------------------------
Posted by: brentleew2003@...
------------------------------------

#yiv5792283176 #yiv5792283176 -- #yiv5792283176ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv5792283176 #yiv5792283176ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv5792283176 #yiv5792283176ygrp-mkp #yiv5792283176hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv5792283176 #yiv5792283176ygrp-mkp #yiv5792283176ads {margin-bottom:10px;}#yiv5792283176 #yiv5792283176ygrp-mkp .yiv5792283176ad {padding:0 0;}#yiv5792283176 #yiv5792283176ygrp-mkp .yiv5792283176ad p {margin:0;}#yiv5792283176 #yiv5792283176ygrp-mkp .yiv5792283176ad a {color:#0000ff;text-decoration:none;}#yiv5792283176 #yiv5792283176ygrp-sponsor #yiv5792283176ygrp-lc {font-family:Arial;}#yiv5792283176 #yiv5792283176ygrp-sponsor #yiv5792283176ygrp-lc #yiv5792283176hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv5792283176 #yiv5792283176ygrp-sponsor #yiv5792283176ygrp-lc .yiv5792283176ad {margin-bottom:10px;padding:0 0;}#yiv5792283176 #yiv5792283176actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv5792283176 #yiv5792283176activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv5792283176 #yiv5792283176activity span {font-weight:700;}#yiv5792283176 #yiv5792283176activity span:first-child {text-transform:uppercase;}#yiv5792283176 #yiv5792283176activity span a {color:#5085b6;text-decoration:none;}#yiv5792283176 #yiv5792283176activity span span {color:#ff7900;}#yiv5792283176 #yiv5792283176activity span .yiv5792283176underline {text-decoration:underline;}#yiv5792283176 .yiv5792283176attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv5792283176 .yiv5792283176attach div a {text-decoration:none;}#yiv5792283176 .yiv5792283176attach img {border:none;padding-right:5px;}#yiv5792283176 .yiv5792283176attach label {display:block;margin-bottom:5px;}#yiv5792283176 .yiv5792283176attach label a {text-decoration:none;}#yiv5792283176 blockquote {margin:0 0 0 4px;}#yiv5792283176 .yiv5792283176bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv5792283176 .yiv5792283176bold a {text-decoration:none;}#yiv5792283176 dd.yiv5792283176last p a {font-family:Verdana;font-weight:700;}#yiv5792283176 dd.yiv5792283176last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv5792283176 dd.yiv5792283176last p span.yiv5792283176yshortcuts {margin-right:0;}#yiv5792283176 div.yiv5792283176attach-table div div a {text-decoration:none;}#yiv5792283176 div.yiv5792283176attach-table {width:400px;}#yiv5792283176 div.yiv5792283176file-title a, #yiv5792283176 div.yiv5792283176file-title a:active, #yiv5792283176 div.yiv5792283176file-title a:hover, #yiv5792283176 div.yiv5792283176file-title a:visited {text-decoration:none;}#yiv5792283176 div.yiv5792283176photo-title a, #yiv5792283176 div.yiv5792283176photo-title a:active, #yiv5792283176 div.yiv5792283176photo-title a:hover, #yiv5792283176 div.yiv5792283176photo-title a:visited {text-decoration:none;}#yiv5792283176 div#yiv5792283176ygrp-mlmsg #yiv5792283176ygrp-msg p a span.yiv5792283176yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv5792283176 .yiv5792283176green {color:#628c2a;}#yiv5792283176 .yiv5792283176MsoNormal {margin:0 0 0 0;}#yiv5792283176 o {font-size:0;}#yiv5792283176 #yiv5792283176photos div {float:left;width:72px;}#yiv5792283176 #yiv5792283176photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#yiv5792283176 #yiv5792283176photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv5792283176 #yiv5792283176reco-category {font-size:77%;}#yiv5792283176 #yiv5792283176reco-desc {font-size:77%;}#yiv5792283176 .yiv5792283176replbq {margin:4px;}#yiv5792283176 #yiv5792283176ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv5792283176 #yiv5792283176ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv5792283176 #yiv5792283176ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv5792283176 #yiv5792283176ygrp-mlmsg select, #yiv5792283176 input, #yiv5792283176 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv5792283176 #yiv5792283176ygrp-mlmsg pre, #yiv5792283176 code {font:115% monospace;}#yiv5792283176 #yiv5792283176ygrp-mlmsg * {line-height:1.22em;}#yiv5792283176 #yiv5792283176ygrp-mlmsg #yiv5792283176logo {padding-bottom:10px;}#yiv5792283176 #yiv5792283176ygrp-msg p a {font-family:Verdana;}#yiv5792283176 #yiv5792283176ygrp-msg p#yiv5792283176attach-count span {color:#1E66AE;font-weight:700;}#yiv5792283176 #yiv5792283176ygrp-reco #yiv5792283176reco-head {color:#ff7900;font-weight:700;}#yiv5792283176 #yiv5792283176ygrp-reco {margin-bottom:20px;padding:0px;}#yiv5792283176 #yiv5792283176ygrp-sponsor #yiv5792283176ov li a {font-size:130%;text-decoration:none;}#yiv5792283176 #yiv5792283176ygrp-sponsor #yiv5792283176ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv5792283176 #yiv5792283176ygrp-sponsor #yiv5792283176ov ul {margin:0;padding:0 0 0 8px;}#yiv5792283176 #yiv5792283176ygrp-text {font-family:Georgia;}#yiv5792283176 #yiv5792283176ygrp-text p {margin:0 0 1em 0;}#yiv5792283176 #yiv5792283176ygrp-text tt {font-size:120%;}#yiv5792283176 #yiv5792283176ygrp-vital ul li:last-child {border-right:none !important;}#yiv5792283176



[Non-text portions of this message have been removed]


Re: B92A no sweep

 

Hi Brent,
To get an intermittent to act up I reach for two things. I grab a can of
freeze spray, and a hair dryer. Use the hair dryer to warm up the entire
plugin. Do not use a Hot Air Gun - it gets too hot.

The freeze spray allows you to focus tighter on individual ICs or on small
areas of the PC board. More often than not the heat or the cold will trigger
an intermittent back to life.

Dennis Tillman W7PF

-----Original Message-----
Sent: Monday, February 13, 2017 8:17 PM
Subject: [TekScopes] B92A no sweep

I forgot to mention that, initially last week the problem began with the
sweep working fine for the first 30 seconds and then quit. It might come
back for a few moments, even another 30 seconds on occasion before not
working at all: I assumed from a component warming up. This week however it
has not worked at all. I was able to use a thermal camera to look at heat on
the boards and found nothing unusual.Whatever it is, it isn't intermittent
any longer.
------------------------------------
Posted by: brentleew2003@...
------------------------------------