In my case, this was an D802. The LCDs have been unavailable for years, but
toggle quoted messageShow quoted text
I wanted this one fixed since it was my first "real" piece of test equipment.
I have a pile of other handheld meters, including a Fluke 27/fm, so getting a
replacement really wasn't the point, getting it fixed was.
I even bought a similar model off of ebay to scrounge for parts, but since it
worked perfectly, I just added it to my bench.
To bring it back on topic, this was more of an example what might be attempted
with the Tek problem.
On Sun, Mar 31, 2013 at 07:17:39AM -0700, Jim wrote:
If this was a hand-held Fluke, be advised that Fluke has traditionally been VERY generous on repairing, replacing, or upgrading their meters for customers. ï¿½In the 80s/90s I was going through these fast enough that I was basically getting new meters for the cost of an annual re-cal.
Yes, operator error....when they ran out of parts for 77 meters, I reluctantly (nudge nudge, wink wink, ï¿½say no more) upgraded to a 179 for about 1/3 the cost of a new one.
You might call their tech support line and ask what their policies are today, and take that nugget of info to the next swapfest. ï¿½I usually see at least one abused-to-death older Fluke meter every time.
Because of this kind of customer support, I'll be a Fluke customer for life. ï¿½But I admit that I have more of those free Harbor Fright DVMs than I have fingers, and they get dragged out more often than the Flukes, because usually I don't need the accuracy-- I just need to do a go/no-go test.
73 and have a blessed day
From: Paul Amaranth <paul@...>
Sent: Saturday, March 30, 2013 7:12 PM
Subject: Re: [TekScopes] Need LCD display for TEK 2336 scope (or repair advice)
I had an old Fluke meter that I replaced the old unobtainable Fluke part with
a standard LCD, that i think cost me $3.50.ï¿½ It involved stringing a bunch of
wires, but it turned out well.ï¿½ The original part had a zerbra strip and
conductors printed on the glass, the replacement was in a DIP package.
See if you can find a similar form factor LCD; after that it's just a matter of
figuring out the connections and a little engineering.
On Sat, Mar 30, 2013 at 04:02:10PM -0000, barreoncall wrote:
Hello all,ï¿½ I am looking an LCD display for the TEK 2336 scope.ï¿½ This is the delay time display in the cover.ï¿½ Or, alternatively, does anyone have any magic fixes for an LCD display with "burn" (for lack of a better term.ï¿½ Where there is a lot of black on the display)--
The manual I have lists it as U37 but I can't find a TEK p/n, it just says "ref U37" and that's it.ï¿½
ï¿½ - Bill
Paul Amaranth, GCIH | Rochester MI, USA
Aurora Group, Inc. | Security, Systems & Software
paul@... | Unix & Windows