Re: Big Cap for 465M


Earthlink <billbrobeck@...>
 

In this case I had to add a jumper and BTW it was the second jumper
added....from a previous repair someone added a jumper where another can had
been substituted by a new smaller one....but back to the pcb...maybe these
are not from one side to the other but definitely required....

-----Original Message-----
From: Rolynn PRECHTL K7DFW [mailto:k7dfw@clatskanie.com]
Sent: Saturday, November 15, 2003 11:22 PM
To: Earthlink
Subject: Re: [TekScopes] Big Cap for 465M


2) When subbing for a old metal cap be sure to put in any required jumpers
from the vacated solder points. Those tek guys used the cap cans to get from
one side of the board to the other.

Unless they are damaged in the removal process the holes in the ECBs are
"through-hole plated" and shouldn't need any help with jumpers. It's an
expectation that they are connecting one side to the other and if not,
something has happened to them. Not a criticism but a FYI.

Rolynn Tek Bvtn & Sunset 1966-1971

..._._

Join TekScopes@groups.io to automatically receive all group messages.