Re: 545b/l20

Dave Henderson <nr1dx@...>

According to the 1L5 manual it says that a modification is required for the 1L5 to be used with the 545 scopes. Sounds like you have to move a wire from the R1153 / R1152 junction to the other end of R1153 which changes the +225 volt supply to the "Vertical Signal Out CF" whatever that means 8^).Sounds like it will work without the mod but you get a lopsided (distorted) display on CW signals.


At 04:58 PM 6/22/2003 -0700, kathnrich wrote:
Hi all;
Will a Tek 545b work with a 1L5, or a L20 spectrum analysers?

Your use of Yahoo! Groups is subject to

Join to automatically receive all group messages.