Re: TEK2230 with GPIB & RS232 port card, need software or X-Y plot

eboytoronto
 

Hi,
I have used the 2230 with a HP 7470A plotter. this comes in two
versions. I used the HPIB version.

Set the HPIB address of the plotter to 31 *BEFORE* turning it on.

The scope is configured through the on screen menus.

Check the on screen menus for other printers.

Good luck.

John

----- Original Message -----
From: <alan_982002@...>
To: <TekScopes@...>
Sent: Wednesday, February 12, 2003 3:18 AM
Subject: [TekScopes] TEK2230 with GPIB & RS232 port card, need software or
X-Y plot


Hi all,

I recently got a tek2230 scope with GPIB/ RS-232 card installed, but
i don't know how to connect it to my computer, can anyone advise me
what GPIB card/ software or X-Y plotter should be use?

Best Regards,
Alan




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Join TekScopes@groups.io to automatically receive all group messages.