Re: 127


Stan or Patricia Griffiths <w7ni@...>
 

Hi Morris,

Well, Tek made TWO different silicon mod kits for the 127, depending upon the
serial number of your instrument. For Serial Number 100-357, it is 040-0217-00
and for Serial Number 358-1409, it is 040-0282-00. There are about 8 pages in
each instruction set. So, if you tell me your Serial Number, I will get a copy
of the appropriate kit instructions for you. It will cost you about $2 plus
postage.

Stan
w7ni@easystreet.com

Stan or Patricia Griffiths wrote:

Hi Morris,

I am sure Tek made a silicon replacement kit for those seleniums. I am sure
I have a copy of it on microfiche. I will check that out at my next free
moment and see about taking my microfiche to the local library and making you
a hard copy of the mod instructions for you. I promise to keep the price of
my labor within reason . . .

Don't let me forget this . . . at age 62, things sometimes fall in the
cracks.

Stan
w7ni@easystreet.com

morriso2002@yahoo.com.au wrote:

I have picked up a 127 preamp power supply that is used to power a
couple of 1- or letter plugins for use as instrument amplifiers. It's
quite a boatanchor and seems to work OK but I want to replace the
selenium rectifiers in it with silicon for safety reasons.

There are 5 rectifiers in there. To save me a bit of measurement work,
does anybody have any info on function/ratings of the rectifiers or
whether Tek issued a bulletin on their replacement?

Morris

To unsubscribe from this group, send an email to:
TekScopes-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Join TekScopes@groups.io to automatically receive all group messages.