Re: Proper Way to Pull Single-Ended Connectors?


I'd thought about shrink tubing as well but if I can get appropriate DuPont holders, I'll probably to that route. I'm pretty sure the wires are color-coded such that brown is pin one, red is pin two, etc., so at least I should be able to get them connected in the proper order. Unfortunately, this one (and I don't think many, if any, in this scope) are flat-cable. That would have been handy.

Barry - N4BUQ

----- Original Message -----
From: "Bruce Atwood" <CCDman1@...>
To: "tekscopes" <>
Sent: Friday, May 6, 2022 3:47:16 PM
Subject: Re: [TekScopes] Proper Way to Pull Single-Ended Connectors?
I also had a blue one disintegrate to dust on my 7904. I put shrink tubing
(blue) on every other pin. The wire to wire bonding in the flat cable keeps
them in order but I drew a diagonal line across the group just to be sure.

Join to automatically receive all group messages.