Re: tek 2215 trace position issues


Mark Vincent
 

Replace the four resistors you asked about with https://www.mouser.com/ProductDetail/Vishay-Dale/CCF60340RFKE36?qs=%2Fha2pyFaduhwK32S4jrtN7H6uGCoKCRsNsGmRuIvfhY%3D. Mount these resistors off the boards a few mm to allow air flow. The 51 ohm types can be https://www.mouser.com/c/passive-components/resistors/film-resistors/metal-film-resistors-through-hole/?q=1%25%20resistor&power%20rating=500%20mW%20%281%2F2%20W%29&resistance=51%20Ohms&instock=y. Ordering 100 of the Xicon will give you enough stock for a while.

Replace the RIFAs off the mains input! These will be a clear amber colour. These are an X2 type. Get the ones with the highest voltage you can, 300VAC or higher. These RIFAs WILL fail. You will know it when they do!

Mark

Join TekScopes@groups.io to automatically receive all group messages.